Naruto | The Valley of End
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The Valley of End scene HueForge
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 145
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 142.83x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Blue Transmission Distance: 4
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA Prusament Lipstick Red Transmission Distance: 3.3
PLA PolyTerra Sunrise Orange Transmission Distance: 2
PLA Kexcelled Yellow Transmission Distance: 6.8 (Most yellows would work)
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 7 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Blue
At layer #13 (1.12mm) swap to Blue Gray
At layer #20 (1.68mm) swap to Lipstick Red
At layer #22 (1.84mm) swap to Sunrise Orange
At layer #25 (2.08mm) swap to Yellow
At layer #26 (2.16mm) swap to Jade White for the rest.