1 / 1
Naruto | The Valley of End — image 1

Naruto | The Valley of End

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

The Valley of End scene HueForge

Rating
0 / 5
Likes
6
Downloads
12
Makes
0
Views
145
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 142.83x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Blue Transmission Distance: 4
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA Prusament Lipstick Red Transmission Distance: 3.3
PLA PolyTerra Sunrise Orange Transmission Distance: 2
PLA Kexcelled Yellow Transmission Distance: 6.8 (Most yellows would work)
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 7 unique filaments

Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Blue
At layer #13 (1.12mm) swap to Blue Gray
At layer #20 (1.68mm) swap to Lipstick Red
At layer #22 (1.84mm) swap to Sunrise Orange
At layer #25 (2.08mm) swap to Yellow
At layer #26 (2.16mm) swap to Jade White for the rest.
 

Tags