Rework Station 861DW Concentrators Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Side mounted stand to be adhered to the side of my 861DW, providing a space for the spare concentrators tips.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 64
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
The Quick 861DW air rework station is very popular for SMD soldering work, but the unused concentrator tips have no storage place. I designed a side mounted stand that is intended to be adhered to the side of my 861DW, providing a space for the spare concentrator tips to be placed.
My design provides space for 3 concentrator tips at once. If your needs go beyond 3 tips, reach out and I'll see what I can do.
My print is made in PLA Tough Lavender 1.75mm filament, with 0.2mm layer height and 15% infill on a Bambu X1 Carbon printer. Print supports are not required.
I use double sided tape to adhere my concentrator mount to the rear of my 861DW.
I hope that you can find this print useful, too. If so, you can support my work by buying me a coffee …
Buy Me a Coffee
Remember to leave me some feedback or even a tip to keep me enthused to make more of these designs.