Rework Station 861DW Concentrators Stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Side mounted stand to be adhered to the side of my 861DW, providing a space for the spare concentrators tips.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 11
- Makes
- 0
- Views
- 64
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
The Quick 861DW air rework station is very popular for SMD soldering work, but the unused concentrator tips have no storage place. I designed a side mounted stand that is intended to be adhered to the side of my 861DW, providing a space for the spare concentrator tips to be placed.
My design provides space for 3 concentrator tips at once. If your needs go beyond 3 tips, reach out and I'll see what I can do.
My print is made in PLA Tough Lavender 1.75mm filament, with 0.2mm layer height and 15% infill on a Bambu X1 Carbon printer. Print supports are not required.
I use double sided tape to adhere my concentrator mount to the rear of my 861DW.
I hope that you can find this print useful, too. If so, you can support my work by buying me a coffee …
Buy Me a Coffee
Remember to leave me some feedback or even a tip to keep me enthused to make more of these designs.