Corsair K95 Palmrest replacement with magnet pockets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a palmrest replacement for the Corsair K95 Platinum keyboards.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 112
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Standard Digital File License
The original Corsair K95 palmrest is a poorly made rubber affair with a metallic frame inside that snaps it in place on the palmrest base. Over time the palmrest develops lumps as the glue inside starts to degrade and the whole palmrest starts dissolving around the metallic frame. Those lumps eventually burst and your keyboard is full of glue.
Since Corsair refuses to sell a replacement and no decent ones were available on the market I decided I would make my own.
Printing requirements:
TPU filament
I suggest a transparent one and some good sparse infill settings to make it look more interesting.
2x6mm neodymium magnets. I got mine from here: https://www.amazon.co.uk/dp/B07RT9MY52
They can be replaced with any kind of ferromagnetic material but for best snapping experience these magnets are recommended. Also you can use them in other projects.
Printing instructions:
Use a textured PEI sheet if you can and print them upside down so it would get the texture of the bed that is nice to the touch.
Pause the print before layer 15 and insert the magnets. I also glued mine in just in case my print head might want to snap them out of the holes.
Continue the print to finish and you have now enclosed magnets in your print that will snap in place on the keyboard.
Notes:
The tolerances are about 1mm on each side so the palmrest has a little movement in the base. This was necessary as my keyboard's palmrest base was not quite rectangular. It had a little skew out of the factory so it was snug on the left and a bit loose on the right. True Corsair manufacturing quality there.