Raspberry Pi Case combined with the Display Mount for Ender-3 V3 KE/SE
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Raspberry Pi Case combined with the Display Mount for Ender-3 V3 KE/SE
- Ocena
- 0 / 5
- Polubienia
- 32
- Pobrania
- 201
- Wydruki
- 0
- Wyświetlenia
- 1363
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- GNU General Public License v2.0
My other Ender-3 V3 KE/SE parts & upgrades:
About:
I designed this Raspberry Pi case combined with the Display Mount for my Ender-3 V3 SE after struggling to find one that suited my needs when I wanted to add an OctoPrint to my printer.
It holds a full-sized Raspberry Pi and lets you power it directly via GPIO, while also routing the remaining GPIO pins back for things like buttons, relays, lights, and more — you can also use my Raspberry Pi Expansion Board for this.
Before you begin:
To connect the display, you’ll either need to re-crimp the stock cable from display side or make your own.
To power your Raspberry Pi, you have a few options:
- Install a 5V 3A power supply inside the printer.
- Connect the Raspberry Pi directly to the 5V and GND pins on the printer's mainboard.
- Remix my model by adding a hole for a micro USB or USB-C connector, depending on your Raspberry Pi version.