Rose with Stem
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Rose with 2 stems.
- Ocena
- 5 / 5
- Polubienia
- 42
- Pobrania
- 455
- Wydruki
- 5
- Wyświetlenia
- 1404
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
My Rose is a remix of https://www.printables.com/model/1170174-single-extrudermulti-part-rose-fusion360 by @mosselini1 which is a remix of https://www.printables.com/model/1161854-rose-decor by @29flo
My Stem is a remix of https://www.printables.com/model/133069-spikey-rose-stemshaft by @Grafit.
If you would like to make the stem longer you can download my stem extensions here. https://www.printables.com/model/709575-better-rose-stem-extensions
I used my 95mm Rose Stem Extension in the picture.
You can find the vase in my Flowers & Vases collection. https://www.printables.com/@Eds3dOdyssey/collections/1227023
Updates
April 6/25 - Added a stem that has leaves.
Printer Settings
PrusaSlicer 2.9
Rose
Layer Height - .15
Perimeters – 2
Seam - Random
Bottom fill pattern – I like to use Archimedean Chords
Support Material
- Turn on Generate Support Material and Auto Generated Supports
- Overhang Threshold – 15 or 20
- Style - Organic
- Top Contact Z Distance – Prusa recommends 50 to 75% of the Layer Height
Fuzzy Skin
- Outside Walls
- Thickness - .2
- Point Distance - .4
Paint-on Fuzzy Skin
- Tool Type – Smart Fill 85%
The reason I use both Fuzzy Skin and Paint-on is because Outside Walls misses parts of the inside of the Rose. Make sure there is no Fuzzy Skin in the hole on the bottom.
Stem
Layer Height - .2
Perimeters – 2
Minimum Shell Thickness
- Top and Bottom – 1mm
Seam - Random
Top and Bottom fill pattern – I like to use Concentric with the stem with leaves.
Brim – You might need to use a brim for the dowel.
Fuzzy Skin
- Outside Walls
- Thickness - .2
- Point Distance - .4
Make sure there is no Fuzzy Skin in the holes on the top and bottom.
Do not use Fuzzy Skin on the Dowel.
If the dowel rod is a little too small or a little too big try increasing or decreasing the XY by 1 or 2%.
I use a heat gun to bend the leaves.
If you have any questions, just ask.
Please post pictures!!!
Filament used in the picture
Roses - Printed Solid PLA Jessie Elixir Royal Ruby and Prusa PLA Ms Pink
Stem - Printed Solid PLA Jessie Green Ice
Vase - Prusa PLA Pearl White