Tea Bag Dispenser with 25mm base
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I added a 25mm base to Stackable Tea Bag Dispenser - Remix of @Manuel_602152
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 70
- Wydruki
- 2
- Wyświetlenia
- 344
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
In order to have enough space for grabbing the tea bag if the dispenser is situated on a shelf I extracted the lower surface so the socket is now 25mm high. Its compatible with the add-on-base (same height) remixed by manual6464 (https://makerworld.com/en/models/898416-base-for-stackable-tea-bag-dispenser#profileId-856886).
I printed it in PETG with 15% Gyroid infill, 2 perimeters. First I just supported the front and the side gaps (3 support towers in total). I turned out its not necessary to support the two overhangs on the top as they print unsupported really well too.
Update 250407:
- added a missing chamfer (not relevant for function)
- removed support on overhang in toip area - no side support towers necessary!
- reduced width of support area for front overhang to save a little material