Tea Bag Dispenser with 25mm base
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€5.34 – €6.53 net (excluding VAT)
For file: 250407_tea-bag-dispenser_with-25mm-base_1-instance_0.4n_0.2mm_PETG_MINIIS_5h28m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €5.94 excluding VAT (range midpoint).
- Weight reported by the author
- 90 g
- Print time reported by the author
- 5.47 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
I added a 25mm base to Stackable Tea Bag Dispenser - Remix of @Manuel_602152
- Rating
- 5 / 5
- Likes
- 8
- Downloads
- 70
- Makes
- 2
- Views
- 345
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
In order to have enough space for grabbing the tea bag if the dispenser is situated on a shelf I extracted the lower surface so the socket is now 25mm high. Its compatible with the add-on-base (same height) remixed by manual6464 (https://makerworld.com/en/models/898416-base-for-stackable-tea-bag-dispenser#profileId-856886).
I printed it in PETG with 15% Gyroid infill, 2 perimeters. First I just supported the front and the side gaps (3 support towers in total). I turned out its not necessary to support the two overhangs on the top as they print unsupported really well too.
Update 250407:
- added a missing chamfer (not relevant for function)
- removed support on overhang in toip area - no side support towers necessary!
- reduced width of support area for front overhang to save a little material