Qidi Q1 Pro Filament Spool Stiffner
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For anyone wanting a stiffner for the Qidi Q1 Pro Side Filament holder.
- Ocena
- 3 / 5
- Polubienia
- 13
- Pobrania
- 77
- Wydruki
- 1
- Wyświetlenia
- 687
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
I know there are probably dozens of these models out there, but I was too lazy to find them so I made one that suited my needs better.
I do like the original location of the filament arm, it works quite well for my setup and keeps the filament path linear for my more brittle filaments as opposed to a top mount or true side mount.
PLA seems fine, print semi solid. Should be about 100g filament. I superglued the edges to the model and it works fine. I have included holes in the side for anyone wanting to drill out the original mounting arm and thread a screw through. The slots in the back are for anyone that wants to epoxy fill the existing arm to the printed brace. Honestly, I thought the epoxy or screws would be needed but just the super glue has been working very well for the past few months.