Qidi Q1 Pro Filament Spool Stiffner
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
For anyone wanting a stiffner for the Qidi Q1 Pro Side Filament holder.
- Rating
- 3 / 5
- Likes
- 13
- Downloads
- 77
- Makes
- 1
- Views
- 687
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
I know there are probably dozens of these models out there, but I was too lazy to find them so I made one that suited my needs better.
I do like the original location of the filament arm, it works quite well for my setup and keeps the filament path linear for my more brittle filaments as opposed to a top mount or true side mount.
PLA seems fine, print semi solid. Should be about 100g filament. I superglued the edges to the model and it works fine. I have included holes in the side for anyone wanting to drill out the original mounting arm and thread a screw through. The slots in the back are for anyone that wants to epoxy fill the existing arm to the printed brace. Honestly, I thought the epoxy or screws would be needed but just the super glue has been working very well for the past few months.