Counting matching models…
A simple recirculating air filter system for the Qidi Q1 Pro. Reuses existing fans and components to seal off the printer chamber, and remove particles and chemicals from the closed printer chamber during printing. In contrast to other…
(ENG) It happened to me relatively soon that the lighting stopped working on my QIDI Q1 printer. The LED strip was bad. Probably thanks to the high temperatures, who knows... Based on a suggestion by @Damien_304779 I made my own version…
Active carbon scrubbers need a lot of mass to be effective against VOCs. There're plenty designs to add scrubber to Q1 PRO, but I'm not sure how much they really help. But even a small HEPA can do a good job filtering small particles, so…
Prevents bowden tube going behind drag chain. Fixes the problem originally described in https://www.reddit.com/r/QIDI/comments/1e6gflq/ptf Best to be printed in ABS/ASA
Q1P PRO Filament cutter(启迪Q1P 切刀) 切刀 切刀座 缓冲器，基于拓竹5通 刀座制作过程。how to make cutter: https://t.bilibili.com/1000611059391791122?share_source=pc_native
Qidi Q1 Pro front cover with removable GDStime 5015 fan and improved visibility. Minimum supports required for the pogo connector bracket. Extruder fan bracket you can find in the gullygossner post linked below. I used #P connector also…
This is a custom LED strip mount designed for the Qidi Q1 Pro. It’s a remix in spirit only — I mainly used the original idea but created my own model from scratch. The design consists of three parts that attach to the top frame of the…
1. Le point de départ du RQ1 découle directement de l’expérience acquise avec mon précédent drone : l’Hyperion . Lors d’une session de long range dans les Alpes, notamment lors d’un déplacement du côté de Breuil-Cervinia en Italie, je me…
A 10-inch Rack mount for Beelink EQ12 mini pc with PSU mounted on side.
I wanted to run a BIQU plate on my Q1 Pro as the blue plate QIDI provides is in my opinion not worth using - PETG sticks HARD to it and you can't lower the plate temp much and still get adhesion. It uses a 250x250 build plate and there…
Printed in Elegoo Rapid PETG and have worked well for a while, maybe just a bit harder to get off compared to the original but otherwise have worked well
This BeeLink EQ14 mount is designed to be used with Multiboard, using four Mulitboard Flush Snap Small Thread Holes.
Intro A compact, modular Stevenson screen designed specifically for the Aqara WSDCGQ11LM square temperature & humidity sensor. The sensor installs into the Lower Part using a snap-in cradle with a latch (no screws or glue) and can be…
Fixes the problem originally described in https://www.reddit.com/r/QIDI/comments/1e6gflq/ptf
This is a 3D model for a spur gear inside the Instax SQ1 that has a cam for a follower that lifts the card up and advances the frame counter during each development cycle. On top of this gear there is a groove that the microswitch falls…
Summary This is a Fusion 360 project that allows you to generate the lens cone for your LF lens and mount it onto an Instax SQ1 instant camera, converting it into a manual instant camera with actually good optics. Big thanks to Georgiy…
Description: This is a model of a device that simulates how a sensor reacts to poor air quality and displays the data on an LCD screen. It’s a simple and educational project, ideal for learning the basics of air quality monitoring and…
Ich habe das Zahnrad konstruiert da ich es leid war alle paar Wochen ein Zahnrad zu bestellen. einmal anständig gedruckt. hält es über viele Jahre. Wenn man viele stufen hat wo er drüber klettern muss wird die bohrung sehr schnell…
BOM 8015 24V fan 10 x M3 heatset inserts (5mm OD) 10x Ø5x3 mm round neodymium magnets 6 x M3x10 mm screws (such as ISO 7380) 4 x M3x20 mm screws (such as ISO 7380) Optional: 4 x Rubber Screw Damping Nail 1 x 90x90 mm nylon computer case…
I created a beautiful and stylish accessory for your projector Zeemr Q1 Pro! The cap’s design matches the projector's aesthetics, creating a functional element to protect the lens during transport. Printing settings: Material: PLA (follow…
Print in .2 layers 10-15% lines infill. Any filament works but PLA is cheapest. This is my final revision. Pictured is MGBC jig, DMGC is the same method. This version you will slide the Q10 display under the protruding tabs. These tabs…
I have printer it in PLA. Please use a double sided adhesive tape for mounting. I do not guarantee that you have the same toola set as mine. Anyway - good luck with printing :-)
Shorter version from the already nice bed stoppers. But when you use it, the level sensor crash into it, when you want to print near the stoppers.
The original bucket is too small, sometimes the purged filament will not fall into it. I make the new one with the extended top to prevent this issue. Due to the heat of the chamber, it is better to print it with ABS or PETG. Print the…
I have a 80mm pipe so edited the hose adapter part using the Fusion 360 file. Get the mounting plate from the original. https://www.printables.com/model/911760-qidi-q1-pro-100mm-exhaust-system
A simple recirculating air filter system for the Qidi Q1 Pro. Reuses existing fans and components to seal off the printer chamber, and remove particles and chemicals from the closed printer chamber during printing. In contrast to other…
(ENG) It happened to me relatively soon that the lighting stopped working on my QIDI Q1 printer. The LED strip was bad. Probably thanks to the high temperatures, who knows... Based on a suggestion by @Damien_304779 I made my own version…
A simple holder for the Teflon feed tube to the extruder chain. Prevents chafing of the top cover. I printed from petg 0.2 layer height, 0.4 extrusion width
A 3dChameleon switch mount for the Qidi Q1pro. May also work with other Qidi printers. Mounts vertical above the rear left motor. Use 1 small screw in the center mount hole to secure switch to mount. X,Y location is x=0, y=245. switch…
Carbon Filter Exhaust for QIDI Q1 Pro With this mod you can use a carbon filter with your QIDI Q1 Pro. Please use active carbon filters which you can buy online at Amazon or Aliexpress Amazon 10mm thickness (Affiliatelink) Amazon 5mm…
I needed to replace the battery for an SQ11 mini camera. Replaced with a much larger battery - needed a bigger case. Print Settings Printer Brand: Creality Printer: Ender 3 **Rafts:** No Supports: No **Resolution:** .2 Infill: 10%…
Originally I wanted to print this model but I didn't want to interfere with the motherboard and also my printer is a later version (V2?) so the 40mm motherboard fan is not attached to the side/bottom of the MB but is screwed on the back…
If you don't use the aux cooling fan, re-purpose it to filter the enclosure. Carefully remove the top duct in 2 parts. Spin it 90 degrees and add the printed parts. The filter box will need an M3 heatset. The lid will need an M3x12 screw.…
v2 of the cutter Unclip drag chain and remove bowden tube. Slide cutter under the drag chain slip over drag chain mount and insert bottom of cutter into bowden hole on print head. Reinstall drag chain and insert bowden tube into top of…
Update 22.12.2024: ---- Update the models with the the bump to avoid the self rotation and add the STEP files for the original fan. ---- The airflow is much better than before, so try it out and please give feedback. I have use it for…
Dieser Halter wird von innen auf den Kunststoffrahmen aufgesteckt und kann dort beliebig positioniert werden. Er ist für den Sunlu Luftfilter gedacht, der stabil in der Schale sitzt. So ist das Display auch bei geschlossener Tür lesbar,…
Bei meinem Q1 Pro ist der PTFE-Tube hinten an der Schleppkette hängen geblieben wenn der Extruder von rechts hinten nach vorne gefahren ist und hat dabei das erste Glied der Schleppkette aufgebogen. Um das zu verhindern, habe ich eine…
Pièces de replacement pour le système de nettoyage de buse de la Qidi Q1 Pro. Le mien ayant cassé (pas étonnant). Assemblage testé au niveau montage et fonctionnement à vide, mais pas essayé sur la machine encore pour le moment. Le…
Dieser Halter wird im Drucker hinten rechts auf den Metallrahmen aufgesteckt. Er ist für den Sunlu Luftfilter gedacht, der stabil im Käfig sitzt. Die Befestigung hat eine doppelte Sicherung: Sie rastet im Metallrahmen ein und in der…
This is designed to activator the manual filament cutter and mount the switch for the 3dChameleon. It can also be used to activate the manual cutter using gcode and not use the 3dChameleon. Orca Slicer Setup Click on the printer settings…
This is a door handle for the QiDi Q1 Pro printer, which is known because of a missing handle. So why to complain? Better let's print our own :-) This one is quite comfortable IMO but also quite visible at front of the printer. Use any…
Door catch with magnets that hold the door of Qidi Q1 Pro slightly ajar for printing of low temperature filaments, eg. TPU & PLA. Small holder clips inside door to provide stow position when not in use.
exhaust using these HEPA filters: https://amzn.to/4dI12td Works best if this is also installed: https://www.printables.com/model/904764-qidi-q1-pro-internal-exhaust-duct
Files: v3 is for bricks that are 7.5cm x 7.5 cm and older. It has only one lip, because I'm to lazy to backport the second lip to the old version. v4 is for bricks that are 6.5cm x 6.5 cm and newer. It has two lips. The fit is a bit…
wall mount for model ASUS ZenWiFi BQ16 24-10-2025 Now with a high model
A 1x1x10 Gridfinity bin for your SQ10 probes, the probes fit in tightly in their holes.
This model is loosely based on https://www.printables.com/model/981928-qidi-q1-pro-nevermore-v6-filter-mount, but completely redesigned to fit on the right side of the chamber. I have designed in slots for M3 nuts. This was printed in…
An improved Qidi Q1 Pro duct that has better nozzle visibility and (with my testing) better airflow due to its split airflow design! You must print this out of ABS, ASA or PA6/12-CF for the best results. PETG will most likely have issues…
Воздуховод для бокового вентилятора Qidi Q1 Pro. Я случайно сломал лопасти на родном вентиляторе и мне не удалось снять родной воздуховод. Я спроектировал свою модель и готов поделиться ей с вами. Я так-же загрузил файл для SolidWorks.…
Makes 1kg spools line up perfectly, and small spools line up much better. You don't need the extra PTFE tube now, and it will be a little better for flexibles since it's more direct (less drag). The only downside is that you need some…
The Qidi Q1 Pro SLYCR2 filament cutter for the Qidi Q1 Pro. This version the body is a one piece slimmer design. No need for supports, I have easy to remove supports built into the model. Just simply twist the support and they come right…
Toolhead filament sensor to replace the Qidi hall filament width sensor. Useful for filament changer systems. Uses the wiring and connector of the original filament width sensor. Uses the 6mm collet from the original filament width…
The original QIDI Q1pro material rack takes up a lot of space and is unstable. I designed this side loading rack to save space, be smooth and stable. It requires a 4mm outer diameter PTFE tube, four M4 * 15 screws, and four nuts.…
Active carbon scrubbers need a lot of mass to be effective against VOCs. There're plenty designs to add scrubber to Q1 PRO, but I'm not sure how much they really help. But even a small HEPA can do a good job filtering small particles, so…
Мне решительно не нравится подход с составными крышками головы у QIDI Q1 PRO и я решил совместить все в одно целое, попутно снизив массу где это только возможно. ДЛЯ КУЛЕРОВ SUNON! Впрочем, я прикладываю STEP, так что желающие смогут…
I tried the filament tube guide (mindfest model) for the spool holder by Groskiwi Dusixtrois. But I prefer using the original filament input on the side panel. So I made simple filament guide for that.
I wanted to have quick and easy way to check the internal temperature and humidity of the chamber in my printer. Readings of the temperature are not the same as digital ones in the printer's native interface, but it shows the ballpark.…
Remixed the original to print with less supports. Changed the joints to be in the middle of each section. Added corner pieces (the green bits) to keep riser inside top of printer. Corner pieces to be glued onto riser bottom. Print 4x…
IF YOU ARE NOT QUALIFIED TO WORK WITH MAINS POWER, DON'T EVEN ASK HOW TO DO THIS. Because it is a pain to reach behind the printer every time I want to switch it ON or Off, I use this to have a switch on the front of the printer. Just…
I have been using the holder by Groskiwi Dusixtrois for a few days. The holder is very comfortable, but the spools often spin noisily. In addition, sometimes the holder damages the paper spools. So I modified the top part of the holder by…
Simple clip-on box for Aqara door sensor to measure the impulses by REED sensor from gas meter. You have to unsolder the REED sensor and use extension cables to connect it back to the board. Works perfectly.
Cover holder for ventilation when printing TPU or PLA. You will additionally need M3x8 screws for assembly
This model clips to the chamber vent fan of the Q1 Pro and allows use of the carbon and HEPA sections of a Bento Box. I have my ABS set to a chamber fan speed of 10% and it works great. There is a flat version and a version with slots for…
Update - I now recommend using the original V2 as @8jack_346518 has added my change and more to the original. I am planning to work on a full properly flow simulated duct with a parametric feature for different nozzle lengths in the…
🚀 QIDI Q1 Pro BS-03 HEPA/Carbon Filter Upgrade – DIY Cleaner Air Mod! 🚀 *filter is for rendering purposes only. Not included in files * Transform your QIDI Q1 Pro into a clean-air powerhouse with this BS-03 HEPA/Carbon Filter Mod ,…
🚀 QIDI Q1 Pro HEPA/Carbon Filter Upgrade – Ultimate DIY Air Purifier Mod! 🚀 Transform your QIDI Q1 Pro into a high-performance air-filtration machine with this custom HEPA/Carbon Filter Setup . Perfect for makers who want clean, odor-free…
Print this remixed 5.1" elbow adapter, then everything from the original model excluding the original elbow: QIDI Q1 Pro Exhaust Duct and Fume Extraction Port With 90 Degree 3" Swivel Elbow
QIDI Q1 Pro, Creality's active carbone filter holder Slight remix of the filter holder by Jorgennor_316411, just modified the size of the pins to fit inside the printers body and add a counter bore to embed the screw heads (this way they…
This vent design adds a curved lip to let the lower electronics chamber vent out convection heat through the exhaust port while also giving the heated chamber fan a wide path to vent out toasty air. All while keeping the two from mixing.…
Compact rear spool holder for QIDI Q1 Pro with bowden fitting or PTFE tube mount. Ribbed for reduced spool friction. V2 now with holes to stow PTFE tube when not in use!
This model is based on my parametric insert for rugged box v2. Two inserts that will hold securely all the items included in the PCBITE-6003 kit by Sensepeek. The insert can hold: 4x SQ10 probes (fully assembled with magnetic arm) 5x…
Printed with PETG (just because I had some) with 4x walls, 4x tops and bottoms, 0.26mm layer height, tree support. Thanks for the original model by @LanderH_311160 and remix by @bud1776_1589365 Original here:…
Qidi Q1 Pro bed leveling tension knob. Every inside tick is 2 minutes. Every outside tick is 2 minutes. Total of 60 minutes. Has access for a nut driver to loosen and tighten the lock nut. I also find it easier to change the…
Stock camera configuration in QiDi Q1 Pro 3D printer causes unnecessary image quality degradation because of LED light falling directly to camera lens (at least if you have the same Q1 Pro version as me, because I can see that QiDi…
If you print in PLA probably you want to take off a sprinter upper cover. I have designed simple rails to put that cover into. In my opinion it looks well and is quite usefull. Goog luck :-)
Credits to ElectraFlarefire for the original model. I noticed that, after slicing, the wall between the mounting holes and side walls of the original model was too thin and could possibly deform so I made the sides a little thicker. It…
All in one. Print in place. Qidi Q1 Pro bed leveling tension knob v2. Every inside tick is 2 minutes. Every outside tick is 2 minutes. Total of 60 minutes. I've also updated the screws_tilt_adjust macro so it probes a reference point in…
Preface: *This mod does not replace the mount the base is attached to. There will be a future mod that will replace the entire unit. * Two options are available in this mod that utilize the Plus 4 silicone wipe pad, or the Q1 Pro felt…
The internal camera of the XPLUS3 is affected by the internal LED lights, causing severe flare. If a self-made lens hood is attached here, it will hit the print head at maximum approach and cause damage accidents (This actually happened…
Because of the strong winds during winter here, the cold air gets pushed to the inside of the QIDI Q1 Pro enclosure if I have the exhaust system (by Igor R.) attached. Since his duct adapter is removeable, I added this back cover port…
Poignées pour la porte et le capot supérieur de la Qiqi Q1 Pro. Imprimé en PETG sans support, couche 0,2. 2 inserts M3 et 2 vis M3x8 par poignée.
to mount, and connect with silicon, Stop toxic smell from ASA Works well, demont box hard
Simple Filament Holder. You need a KP08 Miniature Pillow Block Housing and an 8mm shaft (~50mm length). No Support needed.
Exhaust Fan Tunnel for Qidi Q1 Pro internal 60mm Exhaust Fan
I made this remix before learning about Kamsy's. The primary difference is the “body_bottom” on this design accepts a Bowden tube for an optimal alignment to the extruder and it is also rounded to match the top. The tolerances are…
Took a random spool cover I've had for years and made a quick external version for my Qidi Q1 Pro. This is specific to the Q1 Pro's rear spool holder, there are holes in the design to allow for mounting it to the arm. I used a small…
There isn't enough clearance on the bottom of the NBF-32016 to use dual-lock or command strips. Also, they removed the mount screw holes in the EQ13 model. Thus this bracket, it takes the weight of the EQ13, just drop it in place,…
