1 / 9
Qidi Q1 Pro external temperature and humidity sensor holder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Holder for simple, external temperature and humidity sensor for Qidi Q1 Pro
- Rating
- 5 / 5
- Likes
- 41
- Downloads
- 108
- Makes
- 1
- Views
- 753
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
I wanted to have quick and easy way to check the internal temperature and humidity of the chamber in my printer. Readings of the temperature are not the same as digital ones in the printer's native interface, but it shows the ballpark. Humidity readings are similar ones to picked by another, digital sensor.
Hardware required:
- STL of the main body (2 versions available)
- STL of the back part (2 versions available)
- 2x M3 screws (metric or self tapping ones - depends of the main body version)
+ you can use M3 washers for those screws - 2x M3 heat set inserts (if this version of main body was chosen)
- Nice to have: about 145mm of TPU filament so sensor is sealed from the “outside”
Note: TPU filament itself works as a gasket - no need of printing with TPU
Used sensor - like one from this auction:
https://a.aliexpress.com/_EwLggYz
No supports required. I used PETG.