Qidi Q1 Aux fan chamber filter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Re-use the chamber aux fan if you don't print PLA
- Rating
- 0 / 5
- Likes
- 24
- Downloads
- 64
- Makes
- 0
- Views
- 810
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
If you don't use the aux cooling fan, re-purpose it to filter the enclosure. Carefully remove the top duct in 2 parts. Spin it 90 degrees and add the printed parts. The filter box will need an M3 heatset. The lid will need an M3x12 screw. The only downside it that the fan doesn't generate alot of static pressure, so only fill the filter box about halfway so the air can pass through it. Print the duct and box as oriented with support as needed. I suggest using a filled ABS or better. So changes can be made to your start macros to adjust the fan speed and when the fan runs.
THIS DESIGN ISN'T COMPLETELY FLUSHED OUT FOR THE REASONS MENTIONED ABOVE