Handle for Torx T8 Wrench | SRAM Hydraulic Brakes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Handle for SRAM hydraulic brakes T8 Torx tool, to install the new barb after shortening the hose.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 109
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Included in your SRAM hydraulic brakes is a small T8 Torx tool, meant to install the new barb after shortening the hose.
This is a handle for that tool to snap into.
If IKEA can give you an ergonomic cheap plastic cover for a janky hex wrench, then I can give you this. Park Tool makes a decent tool for the job (DTD-8) but I wish it had larger diameter and coarser knurls.
You might need a punch or similar tool to seat the wrench in the holder. Should snap in place.
Recommend printing this with strong walls and a decent infill % of a suitable pattern. PLA is OK, PETG is better.