Handle for Torx T8 Wrench | SRAM Hydraulic Brakes
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Handle for SRAM hydraulic brakes T8 Torx tool, to install the new barb after shortening the hose.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 15
- Makes
- 0
- Views
- 109
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
Included in your SRAM hydraulic brakes is a small T8 Torx tool, meant to install the new barb after shortening the hose.
This is a handle for that tool to snap into.
If IKEA can give you an ergonomic cheap plastic cover for a janky hex wrench, then I can give you this. Park Tool makes a decent tool for the job (DTD-8) but I wish it had larger diameter and coarser knurls.
You might need a punch or similar tool to seat the wrench in the holder. Should snap in place.
Recommend printing this with strong walls and a decent infill % of a suitable pattern. PLA is OK, PETG is better.