P
Printablesdodasch
SRAM CHAIN GAP ADJUSTMENT TOOL 52 TEETH 12 SPEED
I printed the STL "original" with an Ultimaker 3 Extended in PETG/PLA. You can print the STL "optimized4print" easyer without PVA.
- Downloads
- 2,058
- Likes
- 103
- Rating
- 5
Search results: sram
227 models
P
PrintablesEl Manu
SRAM 2 CHAIN GAP TOOL
The new model of SRAM chain gap tool provided with AXS derailleurs Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Resolution: 200 Infill: 20 Filament: Prusament PLA Category: Tools
- Downloads
- 1,963
- Likes
- 93
- Rating
- 4.75
P
Printablesantionion
SRAM eTap/AXS Cover for Battery Block
SRAM eTap/AXS Cover for Battery Block | Front/Rear Derailleur and Dropper Post Print in PLA 0.4 mm Nozzle 0.2mm Layerhight. Supports Yes
- Downloads
- 1,205
- Likes
- 56
- Rating
- 5
P
Printablesntressler7
SRAM Large Bleed Block - For SRAM Code Brakes
This is a replica of the large bleed block that comes in the SRAM bleed kits. It is intended to be used with SRAM Code RSC and SRAM Code R brakes. DB8 compatibility: As reported by @Radek, this bleed block can also be used with SRAM DB8…
- Downloads
- 1,097
- Likes
- 50
- Rating
- 5
P
PrintablesEl Manu
SRAM ADJUSTMENT TOOL
Provided with brand new EAGLE 12 speed system, this tool allows you to set the correct distance between the pulley and the cassette. Print instructions You are absolutely free ! I printed it in PLA, no need to set the infill as it's…
- Downloads
- 1,073
- Likes
- 112
- Rating
- 4.89
P
Printablesdaytrader
SRAM chain gap adjustment tool V2 - modified for easier print ;-)
The new model Version 2 of SRAM chain gap adjustment tool provided with AXS derailleurs. Works on all SRAM Eagle 12-fach-Cassettes with 50 or 52 teeth as the largest sprocket :-)
- Downloads
- 943
- Likes
- 26
- Rating
- 5
P
Printablespinspanner
Sram Code piston tool set
A set of spacers designed to advance a single piston or two pistons on the same side of the caliper. There is a left and a right side spacer that advance a single piston in the case of a sticky piston or to clean each piston. There are 4…
- Downloads
- 935
- Likes
- 71
- Rating
- 4.86
P
Printablescmh
Holder for bicycle cassettes - Shimano, SRAM, etc
Simple holder for Shimano cassettes with the lockring. Three versions are available: 11 speed version Fits road 11 and 12 speed cassettes Any cassette can fit on this version, but anything that's not 11 or 12 speed road will have a gap…
- Downloads
- 891
- Likes
- 182
- Rating
- 4.94
P
Printablespinspanner
SRAM Universal Derailleur Hanger UDH
Printable UDH hanger. Not sure that I would trust a printed hanger long term but if you need it for a ride and can't get to a bike shop it could be the ticket. I should clarify that this is not a truly universal hanger. Universal…
- Downloads
- 759
- Likes
- 57
- Rating
- 0
P
PrintablesTrimetric
SRAM AXS Charger Holder
If you own more than one bike with a SRAM AXS groupset, you may have accumulated a few of the single battery chargers (EP-EAC-BC-A1) like this one: The individual chargers are very light and the cables tend to cause them to slide around…
- Downloads
- 718
- Likes
- 50
- Rating
- 5
P
PrintablesLuckyMenace
SRAM eTap / SRAM AXS Battery Blank with Keyring Hole
After a ride in which I lost power to both my seat dropper and derailleur as I hadn't charged them, I went looking for a solution - to both reminding me to charge, and also reminding me not to forget batteries on my next ride. I…
- Downloads
- 523
- Likes
- 41
- Rating
- 5
P
PrintablesDaniel Sexton
AGM-69A Missile (SRAM)
This is a full size rendering of an AGM-69A Missile. Cura resizes it for me to 5% so keep that in mind when loading into your slicer. My wife and I worked on this Missile System during our 20 years in the Air Force. The 3D Model is based…
- Downloads
- 510
- Likes
- 32
- Rating
- 4
P
Printablesvidision
SRAM AXS battery and charger organizer
Designed to hold the SRAM AXS charger and 3 batteries or battery covers
- Downloads
- 475
- Likes
- 54
- Rating
- 4.75
P
PrintablesMLEOW
SRAM Umschlingungswinkel/ Chain Gap Tool SRAM
English below Du hast deine einstelllehre von deiner Schaltung verlegt, sie ist kaputt gegangen oder dein Nachbar hat sie sich ausgeliehen und nie wieder zurückgebracht? Kein Problem, Druck sie dir einfach selbst. Ich habe sie gedruckt…
- Downloads
- 422
- Likes
- 21
- Rating
- 5
P
PrintablesAndreas Fink
SRAM AXS Road Brake Caliper Piston Cleaning and Bleeding Block
Sometimes caliper pistons get stuck due to dust and dirt. For cleaning you need to push them out. If you do it wrong they fall out and you loose your breaking fluid and need to bleed the whole system. With this design you can push out one…
- Downloads
- 405
- Likes
- 40
- Rating
- 5
P
PrintablesLauer
SRAM X1 MOUNTAIN BIKE CRANK BOOT
This is a small plastic protector for the end of the SRAM X1 mountain bike crankset, to prevent rocks from scratching the bottom of the crank arms. It will probably fit other aluminum SRAM cranks (GX, etc) but I haven't tested that. To…
- Downloads
- 389
- Likes
- 30
- Rating
- 5
P
PrintablesTiger3DPrinting
Sram AXS battery cover
I couldn't find a axs battery cover that worked for both road bikes, gravel bikes, and mountain bikes so I made my own. hopefully this helps someone. tolerances are tight.
- Downloads
- 375
- Likes
- 31
- Rating
- 4.75
P
Printablesob3calp
SRAM Maven Brake Caliper Piston Massage Block
3.8mm and 4.0mm thick SRAM Maven brake caliper block to aid in the piston massage process. Details of the piston massage process can be found on the SRAM Mineral Oil MTB Disc Brake Installation, Hose Shortening, and Bleed Manual ("Disc…
- Downloads
- 326
- Likes
- 14
- Rating
- 5
P
PrintablesDaniele
Sram Bleed Block (tested on Guide and Level)
I've also uploaded a version with extra space to allow for releasing one piston at a time, making cleaning and maintenance easier. To extract all four pistons, you'll need to print two of these blocks, one should be mirrored.
- Downloads
- 323
- Likes
- 25
- Rating
- 5
P
Printablesquinkq
SRAM DUB Bottom Bracket Preload Adjuster
SRAM Bottom Bracket Preload Adjuster - MPN: 11.6418.001.001 Modeled replacement for myself after breaking the original (ordering aluminium one from ali probably would have been more time efficient). Printed out of PETG 40% infill months…
- Downloads
- 322
- Likes
- 30
- Rating
- 0
P
PrintablesKrystian
Tool for SRAM Rival/Apex/Force AXS Power Meter V2
A simple tool to help assembly and disassembly SRAM Rival/Apex/Force AXS Power Meter (QUARQ) from the crank. 2026-FEB-14 Update: V2 Release: The updated model features an improved fit and an additional lever function, allowing you to pry…
- Downloads
- 320
- Likes
- 26
- Rating
- 5
P
Printablesse038
SRAM DUB Bottom Bracket Tool
Update: Added a part for T47. However, I have only tested it with T47x68 BB. It may not be strong enough for use with T47 internal BB. I printed with PETG and it worked fine. Designed to fit perfectly with TL-FC36. It might not fit in…
- Downloads
- 307
- Likes
- 26
- Rating
- 5
P
PrintablesVasKeZ
Sram AXS Ultimate Pod Button Cap Replacement
I broke the bottom button off my Sram AXS Ultimate shifter pod right before I'm supposed to bring my bike on vcay to Whistler. I tried looking around the web, calling the LBS's and NOBODY has them! Lame. Apparently the part is too new and…
- Downloads
- 307
- Likes
- 28
- Rating
- 5
P
PrintablesMLEOW
SRAM DUB SPACER
English below: Du hast Probleme mit der Kettenlinie oder der Montage deiner SRAM DUB Kurbelgarnitur? Mit diesen selbst konstruierten und 3D-gedruckten DUB-Spacern kannst du die Passung und Funktion deiner Kurbelgarnitur optimieren. 🔧…
- Downloads
- 299
- Likes
- 25
- Rating
- 5
P
PrintablesRenārs Vilnis
SRAM Level TLM/Ultimate Bleed blocks /w different widths for better lever feel
Different width Sram Level TLM/Ultimate bleed blocks (part.no. 11.5015.014.090). The bleed block comes with multiple sizes: * 12mm (default) - Use when bleeding brakes which afterwards will use new pads * 11mm - Use when bleeding brakes…
- Downloads
- 276
- Likes
- 19
- Rating
- 0
P
PrintablesRaphael
SRAM AXS Wallmount
Wallmount for 3 AXS Batteries and 1 AXS Charger
- Downloads
- 253
- Likes
- 22
- Rating
- 5
P
Printablesontopathogenic
Box for sram axs battery
magnet (.2dim x .o65 thick) inches
- Downloads
- 251
- Likes
- 30
- Rating
- 0
P
PrintablesWilfred
SRAM SHIMANO Chaingap tool
I borrowed a chaingaptool and decided to design one for myself (and you) I made a photo, exported to stl, edited in 3d-builder and tinkercad. Its fits fine on my shimano xtr and 45 tooth rear chainwheel. Easy way to correctly adjust the…
- Downloads
- 232
- Likes
- 36
- Rating
- 5
P
PrintablesNick Roosen
SRAM Eagle AXS Controller Discrete Clamp
Replacement clamp for SRAM Eagle AXS Controller. Out of stock EVERYWHERE when I needed one. Clamp bolt is replaced with an M4x10 into an M4 Heatset insert.
- Downloads
- 229
- Likes
- 24
- Rating
- 5
P
PrintablesKyle Mason
SRAM Brake Caliper Pad Spacer
Per SRAM's Hydraulic Road Disc (HRD) Brake Hose Shortening and Bleed Manual this pad spacer should work with the following calipers: RED (2014-2019) Force (2015-2023) Rival (2015-2023) Apex (2017-2023) S-700 (2014-2021) I designed it with…
- Downloads
- 227
- Likes
- 15
- Rating
- 0
P
PrintablesTwo One
SRAM Battery Bike mount
This SRAM AXS backup battery mount allows you to carry a spare battery on your bike. The model features built-in supports that snap off easily. 🔹 Saddle Rail Mount – Attaches neatly under your saddle rails using zip ties 🔹 Bottle Cage…
- Downloads
- 225
- Likes
- 22
- Rating
- 5
P
Printablesaqf23
SRAM DUB BB PF (bottom bracket pressfit) installation kit (NEW V2 handle!!)
This is an SRAM DUB bottom bracket installation kit. It's not necessary to buy a special and very expensive bearing installation tool to install the bottom bracket of your bike, I know that it looks better anodized in blue with a nice…
- Downloads
- 215
- Likes
- 40
- Rating
- 5
P
Printablesad hoc
SRAM cable spool replacement
People have mentioned problems with the cable spools on their SRAM drop bar shifters. Maybe they have also damaged them, I don't know, I've never seen pictures of them. This is a replacement cable spool for the late generation 10 speed…
- Downloads
- 206
- Likes
- 7
- Rating
- 5
P
PrintablesChallengeAccepted
Shift Mixer - Shimano / SRAM
Hooray, I can finally mount my SRAM shifter on my Shimano brake! There are so many ways to fix problems by buying stuff. Here‘s my printed solution to a very common problem: the shifter won’t fit. I am quite sure, that any material other…
- Downloads
- 197
- Likes
- 64
- Rating
- 5
P
PrintablesSkondo
Magura Sram Shiftmix
Used to combine mounting points for magura brakes and sram shifters in one clamp. Printed in PETG with 4 perimeters and 30% infill. No supports needed.
- Downloads
- 190
- Likes
- 20
- Rating
- 4
P
PrintablesSharkovich
Hallowtech II to SRAM DUB BB tool adapter
After buying new crankset with BB, I found out that my 4-in-1 BB wrench was not compatiblem with SRAM DUB BB (shocking, I know). Instead throwing away the same amount of money as I did for BB for special tool, I've decided to give a go…
- Downloads
- 184
- Likes
- 15
- Rating
- 5
P
PrintablesBaklin
Sram Level TLM/Ultimate bleed block
This is an old design that I imported from my prints on Thingiverse. I needed a bleed block after shortening the brake hoses on my new bike. This one works a bleed block and piston spreader. It works on the Sram Level TLM and Ultimate…
- Downloads
- 180
- Likes
- 14
- Rating
- 0
P
PrintablesMape
SRAM eTap dummy battery
Just a plastic dummy battery for SRAM eTap shifters. These can act as dust covers while the real batteries are not in place (winter storage, charging).
- Downloads
- 174
- Likes
- 11
- Rating
- 0
P
PrintablesDaniele
Compact Sram AXS Pod bar clamp
Compact Bar Clamp for the Sram AXS pod controller, it needs to be printed using carbon filament. This specific choice of material is crucial, as it imparts the bar clamp with the essential torsional stiffness required for optimal…
- Downloads
- 173
- Likes
- 15
- Rating
- 0
P
PrintablesCamPaine
SRAM AXS Charger Wall Mount - 2 Chargers - Short
This is a wall mount for 2 SRAM AXS chargers. I have taken the original file and have taken 5mm off the top. Thanks to Trimetric for the original fusion files. If you have any problems with the fit let me know and I can change the…
- Downloads
- 171
- Likes
- 8
- Rating
- 5
P
PrintablesKamil_INC
SRAM GXP and HOLLOWTECH 2 socket tool ROUND
This is a remix of existing model. Made this version smaller, round outside so that edges are not catching the frame.
- Downloads
- 171
- Likes
- 22
- Rating
- 3.5
P
PrintablesTimmaey
SRAM Battery Cover for Pod AXS Controller
I created this design after losing my battery cover on a rough trail and finding that a replacement was out of stock everywhere. Even SRAM couldn't point me to an online shop with one available! If you take a close look, you might notice…
- Downloads
- 168
- Likes
- 12
- Rating
- 0
P
PrintablesMinitrowel
SRAM GXP / HOLLOWTECH 2 / BAFANG socket tool
SRAM GXP / HOLLOWTECH 2 / BAFANG BBS02 socked tool By: Michał “Stemic” (Stemic) License: Commercial use is allowed, you must attribute the creator, you may remix this work and the remixed work should be made available under this license.…
- Downloads
- 164
- Likes
- 9
- Rating
- 0
P
PrintablesMarcoPi
SRAM Guide disk brake pad spacer
SRAM Guide disk brake pads spacer, meant to be used when transporting your MTB without the front wheel on. Remixed from a bleeder I found on https://www.myminifactory.com/object/3d-print-sram-guide-rs-piston-spacer-block-66782 . Print…
- Downloads
- 160
- Likes
- 7
- Rating
- 0
P
Printableskjbturok
Tool for working with single piston brake calipers (Shimano, Sram and Magura).
I have more models available on my cult3d https://cults3d.com/es/modelo-3d/herramientas/3x-kit-for-working-with-brake-calipers-kit-3x-utiles-para-trabajo-con-pinzas-d page that increase the number of compatible brake models. Tool to…
- Downloads
- 157
- Likes
- 10
- Rating
- 0
P
PrintablesSharkovich
Truvativ Descendant/Sram Crank Boot
After switching my crankset I was in the market for this little protector thingy. After printing absolutbrent 's design, though it fit nicely, I was not 100% satisfied with the design, so I remade it. Should also fit SRAM NX crankset,…
- Downloads
- 156
- Likes
- 20
- Rating
- 5
P
PrintablesMike4D
SRAM AXS Disc Brake Caliper Alignment Tool
Don’t expect it to work 100% of the time—not even 50%. This tool WON’T replace visual/audible alignment. I don’t even know why I designed it; it may work sometimes. Fits SRAM RED/Force/Rival and others AXS groups. The 4 mm hole is only…
- Downloads
- 142
- Likes
- 12
- Rating
- 0
P
Printableswoelpi
SRAM AXS bleed block
My old bleed kit didn't have this new bleed block. So I did make my own one instead of waiting for a online ordered one. It should be compatible with these brakes: This is NOT an official posting by SRAM.
- Downloads
- 141
- Likes
- 9
- Rating
- 4.5
P
Printablesmichal00ss
Sram DB8 brake pad spacer (20mm Large)
Hi, I modified ' Piketooth ' pad spacer model to fit Large 20mm SRAM brake pads. I only tested it with my SRAM DB8 model and it fits great (in my opinion more handy than stock black spacer that came with the brake). I think it will also…
- Downloads
- 133
- Likes
- 19
- Rating
- 5
P
PrintablesCamPaine
SRAM AXS Charger Wall Mount - 1 Charger - Short
This is a wall mount for 1 SRAM AXS charger. I have taken the original file and have taken 5mm off the top. Thanks to Trimetric for the original fusion files. If you have any problems with the fit let me know and I can change the…
- Downloads
- 132
- Likes
- 13
- Rating
- 4.75
P
Printablesdodasch
SRAM Pulleys 12s - 14t & 12t
add your prefered bearing (626ZZ) and glue the two halfs together with some super glue I have a SRAM Eagle AXS Drivetrain, everythings works well so far. I printed the pulleys with ASA
- Downloads
- 131
- Likes
- 26
- Rating
- 0
P
PrintablesLgrizzly
Sram DUB Dust Shield
This is a replacement part for the plastic dust shields that come with SRAM DUB bottom brackets. O-Ring groove include (be sure to take this off the old dust shield!). I recommended printing in PETG with a small layer height (.05 or .1…
- Downloads
- 131
- Likes
- 7
- Rating
- 0
P
Printableseagleeye
SRAM cranks bumper
These bumpers are fitting the currend and older SRAM cranks. They are styled not like the original SRAM bumpers, I used the design of my e.13 crank bumpers because these are a bit thicker. My current version is printed in TPU, you may try…
- Downloads
- 129
- Likes
- 21
- Rating
- 0
P
Printablescmh
SRAM 12t X-Sync pulley for 1x drivetrains
There are a ton of jockey pulleys here on Thingiverse, but most of them are the older 11t design. I recently managed to smash up two SRAM jockey pulleys (no idea how, the derailleur was fine) and I found out that replacement pulleys were…
- Downloads
- 127
- Likes
- 42
- Rating
- 5
P
PrintablesCikro
Transportlock for SRAM G2 Brake
Transportlock for SRAM G2 brake if wheel is disassembled. Prevents brake pads to get lose.
- Downloads
- 126
- Likes
- 7
- Rating
- 5
P
PrintablesAdrian Glover
SRAM AXS Battery Blank with Keyring Hole
Allows for a "Remove Before Flight" tag on all current SRAM AXS derailleurs.
- Downloads
- 125
- Likes
- 11
- Rating
- 5
P
PrintablesZagaPRNT3D
Caliper cover for Sram Code brakes
Caliper cover for SRAM Code brakes. Easy installation, and you can still use the safety retaining ring. Optimized design for better printing and functionality. Its main function is to keep mud and contaminants away from the braking…
- Downloads
- 118
- Likes
- 6
- Rating
- 3
P
PrintablesM P
SRAM GX EAGLE Pulley wheel
model based from SRAM GX EAGLE Pulley wheel for 608ZZ bearings
- Downloads
- 117
- Likes
- 17
- Rating
- 0
P
PrintablesNiklas Voigt
Centerlock bike tool Sram and Shimano
A tool designed for installing or removing Centerlock systems, compatible with SRAM and Shimano bikes.
- Downloads
- 117
- Likes
- 9
- Rating
- 0
P
PrintablesT-omi
SRAM DUB tool
This is bottom bracket tool for SRAM DUB system. It is designed to be used with 32mm to 1/2" square socket ( commonly found in standard socket wrench sets) I was using it with digital torque wrench adapter 1.3-130nm that you can cheaply…
- Downloads
- 116
- Likes
- 17
- Rating
- 5
P
Printablesarboc 3D
Sram SX - Crank protector (MTB)
[EN] Sram SX - crank protector (MTB) Compatible with Sram SX Eagle DUB cranks. Maybe it can also be used on another Sram crank model (NX?) Recommended 3D printing settings: Material: Any - PLA / PETG / TPU … (recommended TPU) Nozzle:…
- Downloads
- 114
- Likes
- 32
- Rating
- 4
P
Printablesontopathogenic
- Downloads
- 111
- Likes
- 9
- Rating
- 0
P
PrintablesTimmaey
SRAM DUB Crank Arm Cap / Kurbelarmkappe
Since I could not find it anywhere and have already lost the original part twice, I designed the crank arm cap myself. A replacement (not even an original) costs around € 8,- on Amazon. If you do not have the tool to screw it in, you can…
- Downloads
- 111
- Likes
- 7
- Rating
- 0
P
PrintablesTim Angus
Case for SRAM/Quarq ShockWiz Suspension Tuning System
Not much to say beyond what's obvious. It's a case for the Sram/Quarq ShockWiz suspension tuning system. It doesn't really come with one besides the retail packaging, so this is a better way to store it in a tool box type situation.
- Downloads
- 104
- Likes
- 14
- Rating
- 4.5
P
Printablesmac190
Janusz Sram - foremka do ciastek - Kapitan Bomba
Wesołych świąt Tępe C**je! Zobacz inne foremki → TUTAJ EN: Private Sram - one of the main characters from Bartosz Walaszek's animation series "Kapitan Bomba," in the form of a cookie cutter design.
- Downloads
- 103
- Likes
- 8
- Rating
- 5
P
PrintablesJsR
SRAM code piston spreader
This tool is safe and easy way to spread jammed pistons on Sram brakes. Just insert this tool and pry pistons in with large screwdriver. After that you can just pull brake lever and this tool will return pistons back in because it work…
- Downloads
- 101
- Likes
- 9
- Rating
- 0
P
Printablesindiecow
Sram DUB crank cap tool
Tool for removing/installing crank cap. Compatible with Sram DUB bottom brackets. Use M2 x 16 mm screws.
- Downloads
- 98
- Likes
- 14
- Rating
- 5
P
Printableskrystof
Adapter for I-Spec II Brakes and Sram shifter
2019_05_31 New improved and thicker version. I'm using it for a week or so and till now it works fine. File contains right version only, if you need left, just mirror it. 2019_05_20 After 2-day enduro race The adapter broke again. It…
- Downloads
- 97
- Likes
- 16
- Rating
- 0
P
PrintablesTHUNDERDELUXE
Sram battery and loader skadis holder
A ikea skadis organizer for your bike essentials the SRAM AXS gearshift! There is space for the loading device and two batteries. Best print with 4 Walls so the hooks for the skadis don't break off and are fully filled!
- Downloads
- 96
- Likes
- 6
- Rating
- 5
P
PrintablesKai
Osram Smart Plug Outdoor Case V2
Dies ist die zweite Version des Outdoor Gehäuses für umgebaute Osram Smart Plugs. Dies ist die V1: https://www.thingiverse.com/thing:4070923 ACHTUNG, für den Ubau sind gute Lötkenntnisse erforderlich !!! Falls ihr nicht sicher seid das…
- Downloads
- 96
- Likes
- 9
- Rating
- 0
P
PrintablesIason Argyrakis
SRAM-compatible Brake Caliper Pad Spacer.
Protect your brake system during transport, storage, or maintenance with this SRAM-compatible Brake Caliper Pad Spacer. Designed to be 3D printed flat without the need for supports, it fits perfectly between the brake pads to prevent…
- Downloads
- 94
- Likes
- 7
- Rating
- 0
P
Printablessidereuschungus
Rebar/Roxor Knob/Cap by katysramkova
Reupload of my preferred rebar cap. Original description, not mine: Ever almost got spiked to a steel reinforcement bar during a house construction? People here use plastic bottles to cover it to prevent injury. I use the same bars at my…
- Downloads
- 94
- Likes
- 13
- Rating
- 5
P
Printableseagleeye
SRAM AXS charger wall mount
Mountings for the SRAM AXS charger to mount it in your workshop Printed in PLA and 10% infill
- Downloads
- 91
- Likes
- 24
- Rating
- 5
P
PrintablesMinitrowel
SRAM GXP/HALLOWTECH BB TOOL
SRAM GXP / HOLLOWTECH 2 socked tool by Slovakboy on Thingiverse: https://www.thingiverse.com/thing:3068860
- Downloads
- 88
- Likes
- 17
- Rating
- 5
P
PrintablesCamPaine
SRAM AXS Charger HSW Mount - 2 Chargers - Short
This is a Honeycomb Storage Wall compatible mount for 2 SRAM AXS chargers. I have taken the original file, made it HSW compatible and have taken 5mm off the top. Thanks to Trimetric for the original fusion files. If you have any problems…
- Downloads
- 84
- Likes
- 13
- Rating
- 0
P
PrintablesDaniele
Hope Tech3 Sram AXS POD clamp
Clamp specifically designed for seamless integration with the SRAM AXS pod controller and the HOPE Tech3 lever. This clamp needs to be printed using carbon filament, ensuring superior torsional stiffness essential for maintaining…
- Downloads
- 83
- Likes
- 5
- Rating
- 0
P
PrintablesNigel W
SRAM Pod Ultimate Caps
The SRAM Pod Ultimate clip on Caps come off very easy and they are next to impossible to buy replacements. I lost one, could not buy the clip on version and so designed these. Tested printing in PETG (The clips on the back brock easily)…
- Downloads
- 79
- Likes
- 11
- Rating
- 5
P
PrintablesATProjects
SRAM Eagle X0 Crank boot
TPU Print, oriented as per photo. You could attempt to use no support, I used support but its harder to remove TPU tree supports, keep that in mind. Printed with outer brim, 0.24 layer height.
- Downloads
- 79
- Likes
- 1
- Rating
- 5
P
PrintablesMarco Näpflin
SRAM Wireless Blips – Mount
SRAM Wireless Blips – Mount for Mountain Bike Use I use the SRAM Wireless Blips on my mountain bikes to scroll through pages on the Garmin EDGE without having to take my hand off the handlebar. Alternatively, the Blips can also be used to…
- Downloads
- 78
- Likes
- 7
- Rating
- 0
P
PrintablesKai
Osram Smart Plug Outdoor Gehäuse V1
Dies ist ein Outdoor Gehäuse für umgebaute Osram Smart Plugs. ACHTUNG, für den Ubau sind gute Lötkenntnisse erforderlich !!! Falls ihr nicht sicher seid das ihr das könnt, lasst es bitte vom Fachmann machen! Die angewinkelte Platine…
- Downloads
- 77
- Likes
- 6
- Rating
- 0
P
Printablesmft
Rear cassette spacer for SRAM-equipped mountain bike
A 2mm spacer for the rear cassette of an SRAM-equipped mountain bike - on my bike, there are five of them between the smaller cogs in the rear cassette. The standard item measures exactly 2mm deep. The 2mm model printed slightly too big…
- Downloads
- 77
- Likes
- 10
- Rating
- 0
P
PrintablesRasmus
Sram s7 and s5 cable length tool
Cable length tool for Sram s5 and s7 internal gears. works well its used in professional bike shop. should be printed in durable material but pla can also work just use a couple of perimeters.
- Downloads
- 73
- Likes
- 2
- Rating
- 0
P
Printablesvidision
SRAM AXS Battery Port Cover
First go at a battery port cover for SRAM AXS. The prototype is in grey, but a larger and more visible flag is the goal.
- Downloads
- 73
- Likes
- 6
- Rating
- 5
P
PrintablesZagaPRNT3D
Caliper cover for Sram Code brakes with cooling fins
Caliper cover for SRAM Code brakes. Easy installation, you can still use the safety retaining ring. Optimized design for better printing and functionality. Its main function is to keep mud and contaminants away from the braking surface,…
- Downloads
- 71
- Likes
- 7
- Rating
- 0
P
Printablesduellmp
Sram Guide disc brake piston tool
A tool for mobilizing brake cylinders on a SRAM Guide brake. Remove the brake pads and push the brake cylinders back in using a plastic tire lever. Insert the MobilBlock and secure it with the brake pad locking screw. Press the brake…
- Downloads
- 70
- Likes
- 7
- Rating
- 0
P
Printablessnaens
Sachs/SRAM S7 Fixierbuchse/plastic bushing
Plastic bushing for Sachs/SRAM S7 bicycle hub gear shifter. This is that red plastic part that sits on the shaft, between it and the shifter. It holds the shift tube in the correct orientation for the teeth inside the shifter to engage…
- Downloads
- 68
- Likes
- 3
- Rating
- 0
P
Printablesjsolon
GoPro mount for SRAM MTB QuickView
Do you have the SRAM mount for your Garmin device and wondered if you could convert it into supporting other accessories on the underside? Look no further - with this simple adapter you can mount all your GoPro mount-enabled gadgets, like…
- Downloads
- 68
- Likes
- 20
- Rating
- 0
P
PrintablesCamPaine
SRAM AXS Charger HSW Mount - 1 Charger - Short
This is a Honeycomb Storage Wall compatible mount for 1 SRAM AXS charger. I have taken the original file, made it HSW compatible and have taken 5mm off the top. Thanks to Trimetric for the original fusion files. If you have any problems…
- Downloads
- 65
- Likes
- 3
- Rating
- 0
P
Printablescmh
Screw holder for SRAM 8 bolt chainrings
New cranks for my wife means yet another spiderless chainring standard, and in the case of SRAM 8 bolt chainrings, this means 8 tiny proprietary M4x8 screws to not lose. I thought about putting them in a little ziploc bag and zip tying…
- Downloads
- 64
- Likes
- 12
- Rating
- 0
P
Printablesthegingeroli
SRAM Brake Bleed Nipple
Quick little print necessary to bleed SRAM brakes. Be careful not to overtighten but the threads should print fine without needing to be put through a die. Worked fine for SRAM Level T. Category: Tools
- Downloads
- 62
- Likes
- 7
- Rating
- 0
P
PrintablesWanderoff
SRAM DOT 5.1 Bleed kit box inserts
I realize this one is probably not going to get a lot of downloads, but if you have SRAM Rival brakes, you will need to bleed them eventually, and there is not good way to store the bleed kit until now! This model was designed for the box…
- Downloads
- 61
- Likes
- 14
- Rating
- 4
P
PrintablesCamPaine
SRAM AXS Charger Wall Mount - 4 Chargers - Short
This is a wall mount for 4 SRAM AXS chargers. I have taken the original file and have taken 5mm off the top. Thanks to Trimetric for the original fusion files. If you have any problems with the fit let me know and I can change the…
- Downloads
- 59
- Likes
- 2
- Rating
- 0
P
PrintablesRems
SRAM BRAKE Snow guard
Best in PETG Max layer height : 0.15 Best 0.10.
- Downloads
- 58
- Likes
- 17
- Rating
- 0
P
PrintablesMarco Paganini
SRAM piston massager for CODE and DB8 brakes
However, when servicing your hydraulic brakes, it's very common that a single piston is stuck or coming our easier than the remaining ones. This causes a "spongy" braking feeling and wears pads out unevenly. To solve that problem, you…
- Downloads
- 58
- Likes
- 3
- Rating
- 5
P
PrintablesNkalliotie
SRAM GXP BB splined dust cover
I lost my own somehow so I made a new one. Installed tapered side towards the bearing. If it's too thick, just don't print a few of the layers.
- Downloads
- 58
- Likes
- 3
- Rating
- 0
P
PrintablesMiles L
SRAM DUB 44mm to 49mm bottom bracket adapter
Originally posted by rzschokke on Thingiverse: Use this to adapt a 44mm, 12 spline bottom bracket socket tool (such as Park Tool BBT-79) to a 48.5mm bottom bracket. I already owned a BBT-79, but when I replaced my SRAM DUB BB with…
- Downloads
- 57
- Likes
- 5
- Rating
- 0
P
PrintablesJoBru
Chainring Size Gauge for Shimano / SRAM
I put this up to have an easy way of checking whats the max chainring size for my bike frame without having to buy several sprockets in advance. Note that the Chainring sizes are rough measurements and might vary to the real deal…
- Downloads
- 56
- Likes
- 16
- Rating
- 5
P
PrintablesChris
SRAM Gripshift
So the grip shift rubber sleeves on my 99 gary fischer started decomposing and leaving large amounts of rubber on my hands. So I looked on line and, if you can find them, new sleeves were $50. So I came here to look and I found…
- Downloads
- 56
- Likes
- 11
- Rating
- 0
P
PrintablesJakub
Chainguard for bike (Sram X9 Truvativ)
Chranic retaze na Truvativ Sram X9. Nevedel som nic poriadne najst tak som spravil remix tejto krytky na bike https://www.thingiverse.com/thing:990049/files Chainguard for Truvativ Sram X9. Couldn´t find something that fits, so I have…
- Downloads
- 55
- Likes
- 19
- Rating
- 5