SRAM piston massager for CODE and DB8 brakes
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Piston massager for SRAM Code (Code-R, Code-RSC) and DB8 brakes. Eliminates "sticky" pistons from your brakes.
- Rating
- 5 / 5
- Likes
- 3
- Downloads
- 61
- Makes
- 0
- Views
- 145
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution
However, when servicing your hydraulic brakes, it's very common that a single piston is stuck or coming our easier than the remaining ones. This causes a "spongy" braking feeling and wears pads out unevenly. To solve that problem, you need a piston massager.
This model is was specifically design to fit the SRAM "Code" series of Brakes (tested with Code-R, should work with Code-RSC as well). To use, just push the pistons in and insert the block. Gently squeeze the brake handle until only one piston is out. Use isopropyl alcohol to clean the sides of the piston. Squeeze the piston in, remove and rotate the block, and repeat for all 4 pistons.
This model was heavily inspired on a plastic Code R block I bought from some dubious websites a while ago. That model worked for a while, but was too lightweight and didn't last.
Print standing on its side, supports on, 100% infill.