Search results: piston

Counting matching models…

Printables

Pegboard holder for CMH caliper piston spreaders

Printables

Fidget pushing piston - fast to print & simple to assemble!

It takes about 20 minutes to print. This simple model require: 1x spring from a pen 120 mm 4 mm OD bowden cable minimum 200 mm electrical cable or thin rope The assembly procedure is very simple. I attached a video to show how to easily…

Order a print of this model

Printables

Piston Bead

My entry into the bead contest. Fun little flair to add if you're a car enthusiast or a mechanic or even if you just think it looks cool. The ringlands are .25mm thick, so print with the smallest layer height you can for the best result.…

Order a print of this model

Printables

piston keychain

piston keychain for car enthusiasts

Order a print of this model

Printables

Piston Ring Compressor

I made this as an inexpensive alternative to a metal tapered piston ring compressor. It worked well on the 87mm bore Nissan SR20DE I am building. I also made one in 86mm, since that is the stock bore for the SR20 and a number of other…

Order a print of this model

Printables

X-Shot Pro Piston Pump AEB Barrel Shroud

The X-Shot Pro Piston Pump AEB Barrel Shroud is a stylized muzzle to cover the exposed barrel of the X-Shot Skins Pro Motorized Piston Pump AEB. Featuring a Picatinny rail and M-Lok-compatible slots, this shroud allows for the mounting of…

Order a print of this model

Printables

Xshot MPP Motorized Piston Pump AEB Anti-Rattle Battery Spacers

Multiple sizes available ranging from 1mm to 5mm. Great for those who wired in a smaller lipo. Stack together for custom sizes.

Order a print of this model

Printables

Xshot MPP Motorized Piston Pump BCAR Clamp

I found that the xshot bcar was loose on some of my barrels so I quickly designed this to fix the issue. Model is print oriented and doesn't require support. Uses M3 hardware. *I only have pla+ at the moment so I am unsure if basic pla…

Order a print of this model

Printables

Spyder's MPP Front Shroud ( X-shot AEB motorized piston pump )

If you enjoy my creations/remix, feel free to support me via buy me a coffee- https://buymeacoffee.com/spydergiant This is my own X-shot MPP shroud that I modeled and designed to try to make it look as factory"ish" as possible. Side…

Order a print of this model

Printables

X Shot Motorized Piston Pump 'Terrier-K/M/XL' short and long handguards

IMPORTANT UPDATE: DON'T PRINT version 1.01 of the XL handguard. There was an issue resulting in a 3mm gap towards the rear. Please print the new 1.02 version instead. This issue doesn't affect the M and K versions. Handguards for the…

Order a print of this model

Printables

X Shot Motorized Piston Pump 'Utonagan' handguard

A handguard for the Motorized Piston Pump by XShot. There is picatinny on the 12 o'clock position and usable M-LOK on the sides and bottom. Slides over the barrel collet from the front. 2 bolts clamp it down. .stl comes pre-oriented. .stp…

Order a print of this model

Printables

XShot Motorized Piston Pump 'Utonagan' handguard - long version (remix)

see @LoneWolf052 ‘s profile, he did all the work on this model. You can still print without support and you’ll need the same hardware to lock the barrel shroud in place. A (longer) handguard for the Motorized Piston Pump by XShot. There…

Order a print of this model

Printables

Honda B20 84.5mm Piston Squaring Tool

An easy way to ensure your piston rings are squared when setting ring gaps. The tool is meant for 84.5mm Honda B20 blocks. Print in PLA or PETG with top facing down on the bed. Default settings work fine.

Order a print of this model

Printables

I5 Inline Engine Model | Functional Pistons, Valves & Timing Chain

This project is a fully functional I5 engine model designed for 3D printing. It features: Moving crankshaft, pistons, timing chain, and two valves per cylinder, standard firing order: 1‑2‑4‑5‑3, 🔩 Assembly Details The model is assembled…

Order a print of this model

Printables

V8 Engine Model | Functional Pistons, Valves & Timing Chain

This project is a fully functional V8 engine model designed for 3D printing. It features: Moving crankshaft, pistons, timing chain, and two valves per cylinder, standard firing order: 1-8-4-3-6-5-7-2, Fully printable timing chain, Can be…

Order a print of this model

Printables

50cc piston and crankshaft

One to one piston and crankshaft with moving components.

Order a print of this model

Printables

V6 Engine Model | Functional Pistons, Valves & Timing Chain

This project is a fully functional V6 engine model designed for 3D printing. It features: Moving crankshaft, pistons, timing chain, and two valves per cylinder, standard firing order: 1-2-3-4-5-6, Fully printable timing chain, Can be…

Order a print of this model

Printables

Team Corally Shock Piston

Created this Shock Piston for my Corally Python. Corally Part number is: C-00180-080 Holes are 6 x 1.3 mm. Used a small drill after printing to create a clear hole with this diameter, but I think it is not really needed if your printer is…

Order a print of this model

Printables

Lego Compatible (4254.dat) Technic Shock Absorber 6.5L Piston Rod

This model is compatible with the lego system.

Order a print of this model

Printables

Piston Seal Mold, Tom Stanton Compressed Air Engine

Ich hatte immer Probleme beim erstellen der Dichtung da das zu gießende Silicon immer mit der Gießform sich zusammen Klebte. Egal wie viel Trennmittel ich benutzte es half nichts, also habe ich diese zwei Komponenten Form erstellt mit der…

Order a print of this model

Printables

Bicycle disc brake piston separator

Print two and have fun pushing pistons apart :-) Be sure to print so that the hole is oriented vertically. The original version had no tolerance gap and the notch didn't help that (too) tight fit, either. On the other hand the "ring" to…

Order a print of this model

Printables

Engine piston decoration

This model is a 1:1 scale piston and piston rod for a real life engine. This is not meant to be fabricated and used in a real engine!! There was little to no engineering behind this. This model is meant to be scaled down in your slicer…

Order a print of this model

Printables

Xshot Motorised Piston Pump Buffertube QD Sling Mount

QD Sling was used for a day crawling though tall grass, dropped onto sling multiple times for sidearm use. Normal sling will fit too. This model is ambi for those left handers out there! Test fit and drop before use! Printed in petg 50%…

Order a print of this model

Printables

Makita piston replacement for cartridge gun DCG180

I made this Makita replacement piston for the DCG180 because I thought the original one was getting filled with sealant in all the corners. I used 100% infill and PTE. I used an ear plug to close the holes so that no sealant would get in.

Order a print of this model

Printables

Kolben für Hilte TE76 oder andere TE../Piston for Hilti TE76 or others

Erregerkolben für Hilte TE 76 Schlagbohrmaschine! Passt auch für andere TE Modelle In PETG oder noch besser ABS drucken! Original Hilti Ersatzteilnummer: 330059 Zusätzlich benötigt: O-Ring 24,99x3,53mm

Order a print of this model

Printables

A small screw holding for SAECO BLACK COUNTER PISTON BREW UNIT

A small screw holding for SAECO COFFEE MACHINE BLACK COUNTER PISTON BREW UNIT, part number 11003796

Order a print of this model

Printables

NEW Piston design - Lego Porsche GT3 RS Display Stand

Print settings: Nozzle - 0.4 mm Layer - 0.12 mm Perimeters - 3 Custom supports - Right Bottom corner Fill - Gyroid 15% Recommendations: Material - PETG After printing - Smooth out Studs with Heat

Order a print of this model

Printables

XShot Piston Pump - Short Stock

Print it flat on the side with the built-in support flat on the bed. there's another built-in support inside the stock. You shouldn't need any slicer supports for this. One M3 voron-spec heatset and one 8mm M3 thumbscrew are needed

Order a print of this model

Printables

Piston ring compressor (parametric) - v2

Enter the diameter of your piston and the required height (including all rings) in the FreeCAD Spreadsheet to adapt the model to your engine. You can decrease the diameter by 1mm to ensure sufficient tightening of the tool, but in my case…

Order a print of this model

Printables

Simple Robust Water Pistol / Piston

This water pistol is assembled with 25mm (1") and 20mm (3/4") conduit. This PVC electrical conduit is made against an Australian standard so you may need to play with tolerances and gaskets to get this to work with other international…

Order a print of this model

Printables

Shimano "unlock" piston(s) block

Per "sbloccare" i pistoni "pigri" delle pinze Shimano a 4 pistoni (tutte). Due versioni disponibili: per i due pistoni di uno stesso lato; per un singolo pistone.

Order a print of this model

Printables

Magura MT2 piston tool

I designed this spacer to fit the Magura MT2 (2020 model) hydraulic brake caliper. This tool blocks the piston on one side to allow the piston on the opposite side to extend out of the caliper so that it can be cleaned and lubricated.…

Order a print of this model

Printables

Project Blue Handguard for XSHOT Motorized Piston Pump (MPP)

Collect is still accessible, and it locks the handguard in place, meaning no tools or other parts are needed. Other features include the free-floating design, front and rear Picatinny, and slim profile perfect for a C-clamp. I printed…

Order a print of this model

Printables

Fahrradbremskolbenarretierung / brake piston fixations for hydraulic brakes on bicycles

Wessen Fahrrad mit hydraulischen Scheibenbremsen ausgerüstet ist, der sollte, wann immer ein Rad z.B. zum Wechsel des Reifens abgenommen wird, verhindern, daß versehentlich die Bremskolben herausfahren und so den Wiedereinbau erheblich…

Order a print of this model

Printables

9mm Pneumatic Piston Sensor Holder

The clamp for the 2 sensors needs 2pc M3x8 bolts and 2pc M3n nuts. The clamp for 1 sensor needs 1pc M3x8 bolt and 1pc M3n nut. Prints without supports and the nuts can be placed after printing.

Order a print of this model

Printables

Piston Aircraft Engine ML-370K (28 hp)

ML-370K is a lightweight two-stroke carbureted piston aircraft engine with a power output of 28 hp, manufactured by JSC “Motornaya Lavka”. Description: • two-stroke carbureted engine for aviation use • designed for ultralight aircraft and…

Order a print of this model

Printables

Opposed Pistons Engine

General An opposed-piston engine is a two-stroke internal combustion engine where two pistons move toward each other within a single cylinder, with combustion occurring between them, eliminating the need for a cylinder head and…

Order a print of this model

Printables

3DN FGC6 Piston 14.10mm

normal pistom likely to break at bottom so im make its longer it wont break lol good performance every build trust me :D tested on 3DN 14.1mm oring 2mm OD14mm ID10mm

Order a print of this model

Printables

motor piston kei can easy to print

instruction 0.2 0.3 mm print low supports i work hard to this new project. channel tech 3d or gamerlow01

Order a print of this model

Printables

Piston - key chain

A piston is a moving part of a mechanism, usually cylindrical in shape, that moves up and down inside a cylinder. In piston engines, such as internal combustion engines, pistons are a key element in converting thermal energy into…

Order a print of this model

Printables

Piston/Connecting Rod Assembly - Moveable

Hi there, here is my design of a piston/connecting rod assembly based on a Subaru EJ20 STI motor. These parts were designed through the Onshape CAD software. Printing Instructions: 0.12/0.2mm layer height depending on your desired detail.…

Order a print of this model

Printables

Piston for tamiya Shocks

As the piston on my shock absorbers was broken and I didn't want to order online because of a component costing a few cents, I designed the piston. Printed in PLA, diameter 10.89mm. The installation is done simply by replacing the old…

Order a print of this model

Printables

LaPavoni Millenium Lever Piston Sleeve Tool

Tool for removing or installing the piston sleeve in a LaPavoni lever coffee machine (millenium version). Includes a hole for screwdriver/hex key for additional torque. Print settings: Printed in PETG 0.20 mm layer heigth (0.20 mm…

Order a print of this model

Printables

Parametric Bleed Block and Piston Cleaning Block

Accessing Parametric customization: Open the .f3d file in fusion360 and click “fx” to change the parameters. Measure: Backing plate width and height (1mm clearance built into tool) Pad Thickness (measure both pads and divide by 2 - MUST…

Order a print of this model

Printables

Piston Coaster set 4 coasters

Piston coaster set, 4 coasters, good size. fun mancave or shop accessory.

Order a print of this model

Printables

Piston Engine

Some cool model engine parts to place in your room. I hope you like it Disclaimer: dont use it for real engines ;)

Order a print of this model

Printables

Kuat piston tire block for the front tire

My tire flopped a lot with the kuat piston racks. So i designed a block to hold the front tire in place. You will still need 2 rubberized velcrow strips needed for holding the block in place. Straps i used.…

Order a print of this model

Printables

Door piston Cover

Here is Piston cover for the doors in my classroom

Order a print of this model

Printables

Water valve container piston for Gaggia, Bosch, Saeco

I designed a replacement water valve piston for Gaggia coffe maker water tank. The original part broken, but the coffee maker still functioning.

Order a print of this model

Printables

cars piston cup

Order a print of this model

Printables

G&G GHC 1-46 Mini Piston

I made a mechanical part out of it, it is as one as the original part.

Order a print of this model

Printables

FAAC Genius G-Bat 300 Gate Piston Key

Order a print of this model

Printables

Motor block with one piston there can turn.

I have used support to the bed and everywhere. It a little fiddle to remove it but I have done it tree times now. I have used Spectrum PLA.

Order a print of this model

Printables

pistone ape 50

pistone ape 50 senza spinotto

Order a print of this model

Printables

ENGINE pistone, biella (senza spinotto)

pistone, biella. utilizzabile come porta chiavi

Order a print of this model

Printables

Piston Cup

6 parts, no support needed, no glue

Order a print of this model

Printables

In-Line 4 piston engine model

Model of I4 engine. No glue, no screws required

Order a print of this model

Printables

V8 crossplane piston engine model

V8 engine with cross-plane crankshaft. No glue, no screws required

Order a print of this model

Printables

Pegboard holder for sram ultimate piston press

Pegboard holder for sram ultimate piston press. I use triton screws to mount my prints to pegboard and they work great. https://www.amazon.com/gp/product/B0B169CQST

Order a print of this model

Printables

V12 piston engine model

Model of 60° V12 engine. No glue, no screws required.

Order a print of this model

Printables

Piston Cup from Cars

Here is the Piston Cup from cars ! It has been designed to minimize the need of supports. It technically needs no supports but I personnaly used for the wings and the rod just to be sure. I didn't had the time to paint it but as soon as I…

Order a print of this model

Printables

Storm/ Screen Door Piston Clip

The piston lock on our storm door kept sliding against the piston on its own over time so we would have to move it back to close the door all the way. This is a simple snap-on clip that will keep the lock stowed until actually needed.…

Order a print of this model

Printables

Piston stopper m14x1,25

This model ist a piston stopper or blocker or however you want to call it. It screws in the sparkplug hole and blocks the piston before reaching top dead center. how to find tdc with a pistonstopper is already widely documented on…

Order a print of this model

Printables

Mini Piston Keychain

Little Piston Keychain with a 2stroke look. Is bolted together with a m3x10 bolt.

Order a print of this model

Printables

Brake piston mobilizer

I thought I'd use cmh's idea to build a piston mobilizer tool, to let only one piston move, while the other 3 are held back. Doing this helps for keeping the brakes run smoothly without rubbing. This version works quite well, but I feel…

Order a print of this model

Printables

Shimano 4-Piston Brake Bleed Block

This 3D model is a custom bleed block designed for Shimano 4-piston hydraulic brakes. It’s a practical tool for aligning the caliper during brake bleeding, ensuring precision without hassle. The design emphasizes easy assembly and…

Order a print of this model

Printables

Piston Cup Tree Topper Base

This is a remixed part of Yvrogne's Piston Cup model, enabling it to be used as a Christmas tree topper. You'll need Yvrogne's piston part. The whole model is moderately heavy (as far as tree toppers go) but it does actually stick on top…

Order a print of this model

Printables

PISTON JUNK HOLDER

can hold anything from cans to pencils and pens and is attachable to almost any work bench

Order a print of this model

Printables

Bruder Front Loader Piston

If your front loader mechanism is broken like all of our's are, you can replace the origninal piston with this one so that the front loader snaps in to different positions again. Add a little support to the large bridge so it prints well:…

Order a print of this model

Printables

Derbi Ignition Cover for Piston Port / Pyramid Reed

Little ignition cover for a Derbi moped of the Piston Port / Pyramid Reed variety. Not perfect, but will keep the dust out for my RD50. Category: Automotive

Order a print of this model

Printables

vespa spark plug piston stopper tdc finder

timing tool for Vespa large frame motors finding top dead center to calculate spark advance sparkplug threads m14

Order a print of this model

Printables

Pontiac Piston 3D Scan

This was my first time 3d scanning with the 3DMakerpro scanner. I used an old piston from my 68 GTO's engine as the model. Its not 100% perfect but someone can touch it up if they want. I was asked in a group to upload the file so here we…

Order a print of this model

Printables

Detroit Pistons Oversized Necklace, Pendant

Here is the awesome looking Detroit Pistons Oversized Necklace, Pendant! Hope you guys enjoy! Fits with the standard oversized chain you can find here on Makers World. Want a Commercial License to sell my prints? Join my Patreon or Thangs…

Order a print of this model

Printables

Pegboard holder for CMH caliper piston spreaders

Order a print of this model

Printables

Shimano XT 4 pistons brake bleed block 21 holes

Since was almost impossible to find a bleed block for my Shimano brakes I've checked the measurements of the original one and printed it. Works great! Print and check thickness should be between 10 and 10.2mm to get regular bleeding of…

Order a print of this model

Printables

MTB Piston Advance Block

Simple block to advance a single piston on most 4 piston MTB brakes. Flip and rotate the block to advance your favorite (or least favorit) sticky piston for cleaning. just keep an eye on the piston as you advance it, to make sure it…

Order a print of this model

Printables

Piston and Connecting rod

Nicely working piston and connecting rod, use as you like just remix. The model was inspirated by the picture below, i did not know how to make the bolts to connect the model to the base so it would be nice if you can do it and post a…

Order a print of this model

Printables

diesel piston and connecting rod

just a piston and conrod

Order a print of this model

Printables

Gridfinity Brake Caliper Piston Tool Storage.

Gridfinity bin, 2 x 5 x 3 for brake caliper piston tool. Made with the Powerbuilt brand tool in mind. Likely works with similar brake caliper tools.

Order a print of this model

Printables

Detroit Pistons Logo

Order a print of this model

Printables

Air Gun TPU piston Cover

This is an accordion TPU cover to cover the piston on an compressor air gun I am putting into a blast cabinet with the goal to keep keep some of the media out. The shaft is 6mm dia x 12.7mm long. The nut is 15.4mm diameter with a height…

Order a print of this model

Printables

Piston Piston Fix for Chair

My office chair piston is busted, I saw online that you can get a pipetube to fix it. Literally to a height you want, since I am lazy and I have a printer. I decided to draw one and print it instead of disassembling the chair. The…

Order a print of this model

Printables

Raritan Head Piston Rod Yoke Part 1211PL

This a copy of the Raritan Head Piston Rod Yoke Part 1211PL This piece on my head broke. I was in a remote location and was unable to have one shipped. I grabbed some calipers and did some cad work. This exact replica is what I came up…

Order a print of this model

Printables

Nema17 Based Piston Actuator

This actuator can be attached to the top of a NEMA17 stepper motor, to create a simple cyclic linear motion. Two versions of the piston wheel are included, with and without spur gear teeth. The gear teeth are module 1, 40 teeth. Two (2)…

Order a print of this model

Printables

Piston Keychain

Order a print of this model

Printables

Chainsaw piston ring compressor Stihl, Husqvarna, Echo, Homelite,McCullough

I made this to compress the rings on a Stihl 031 chainsaw. Plan on making more sizes, if you have a piston size to suggest send email to [email protected] and i will make an stl to add to the project. 46mm for O28 woodboss 48mm for…

Order a print of this model

Printables

Shimano 4-Piston Brake Cleaning Blocks

These cleaning blocks are designed to help with the maintenance of Shimano 4-piston disc brakes. They ensure proper spacing while cleaning the pistons, making the process easier and more effective. Printing Instructions: • Material: PLA…

Order a print of this model

Printables

SRAM Maven Brake Caliper Piston Massage Block

3.8mm and 4.0mm thick SRAM Maven brake caliper block to aid in the piston massage process. Details of the piston massage process can be found on the SRAM Mineral Oil MTB Disc Brake Installation, Hose Shortening, and Bleed Manual ("Disc…

Order a print of this model

Printables

Support Cigare En Piston

2 Support Cigare En Piston , 1 En X30-Y30-Z40 Et L'Autre En X40-Y40-Z50

Order a print of this model

Printables

Hope caliper piston cover tool

Hope piston bore cap removal tool

Order a print of this model

Printables

Porte-clé Piston

Un simple porte-clé sous forme de piston

Order a print of this model

Printables

Shimano 4 piston Bleed Block

A combined bleed block for 4 piston Shimano brakes. The wide part is the standard Shimano bleed block, without the ears to allow top loading. Use this part to make the quick lever bleed, or before a full bleed. The narrow part is what was…

Order a print of this model

Printables

Shimano 4 piston brake service

A compact tool to clean the pistons individually on Shimano 4 piston brakes. Depending on orientation you can clean and lube each piston one after the other. The tool is designed to allow top or bottom loading.

Order a print of this model

Printables

airsoft hk pistole usp piston

airsoft hk pistole usp piston for replacment broken

Order a print of this model

Printables

Browin piston sealing ring.

I had a problem with my Browin 1.5 kg sausage stuffer, silicon piston is a bit smaller than tube and meat escaping from it bacwards approx 30% of load during stuffing. So i made a sealing “sock” to prevent it happening. Uploaded in…

Order a print of this model

Printables

Flexi Piston Buddy (articulated - no supports)

Summary Easy-to-print and without supports printable buddy in the form of an engine piston. I hope you like it! Requires only 15g of filament! Print no supports! 0.2mm layer height or lower 15-20% infill Postprocessing Be careful when…

Order a print of this model

Printables

Shimano M485 piston un-stucker

My Shimano M485 had one of the pistons quite stuck, which resulted in one of the brake pads being completely worn out rather quickly. I used this to keep the other piston (the one that still moved) in place and to then exert pressure on…

Order a print of this model

Printables

piston asembly, open to remixes

a demonstration of a piston engine

Order a print of this model

Printables

bent-axis axial piston pump

This model has a cutout, so you can see the important moving parts. This is unfortunately not an actual hydraulics pump, but all the correct parts are moving. Required for assembly: all printed parts, four 3x10 mm screws and two 4x16mm…

Order a print of this model

Printables

magnetic piston engine

made with onshape you need 2 cm diameter neodymium magnets copper wire and endstops

Order a print of this model