1 / 2
X Shot Motorized Piston Pump 'Terrier-K/M/XL' short and long handguards — image 1
1 / 2

X Shot Motorized Piston Pump 'Terrier-K/M/XL' short and long handguards

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Short an long versions of the Terrier handguard for the MPP

Rating
5 / 5
Likes
83
Downloads
459
Makes
6
Views
2,212
Reviews
6

Updated at source:

Model information

Category
Outdoor Toys
License
Creative Commons — Attribution — Noncommercial — Share Alike

IMPORTANT UPDATE:
DON'T PRINT version 1.01 of the XL handguard. There was an issue resulting in a 3mm gap towards the rear. Please print the new 1.02 version instead. This issue doesn't affect the M and K versions.

Handguards for the Motorized Piston Pump by XShot. Inspired by the HK433.
There is picatinny on the 12 o'clock position and usable M-LOK on the sides and bottom.
Slide over the barrel collet from the front. 2 bolts clamp it down. 
.stls come pre-oriented. .stp files are included. Prints without support.

Original: 210mm long
K (Kurz) - Shortest version; 130mm long
M (Medium) - Sligthly shorter than original; 170mm long
XL (Xtra Long) - Longer than original; 250mm long (231mm print height required!)

REQUIRED HARDWARE :
- 2x M5x30mm socket head screw
- 2x M5 Hex nuts (Nylon lock nuts recommended) 
 

Tags