Counting matching models…
Sample geometry to match the threading of the buffer tube since it's non-standard. The numbers on the end of each file are the clearances on the M29x1.5mm baseline; +0 is no clearance, +2 is .2mm oversized, -3 is .3mm undersized. Use the…
Check out my socials and other things at https://linktr.ee/KDxGP Like my creations? Consider buying me a coffee ☕ at https://www.buymeacoffee.com/KDxGP. Thank you!
Multiple sizes available ranging from 1mm to 5mm. Great for those who wired in a smaller lipo. Stack together for custom sizes.
I found that the xshot bcar was loose on some of my barrels so I quickly designed this to fix the issue. Model is print oriented and doesn't require support. Uses M3 hardware. *I only have pla+ at the moment so I am unsure if basic pla…
If you enjoy my creations/remix, feel free to support me via buy me a coffee- https://buymeacoffee.com/spydergiant This is my own X-shot MPP shroud that I modeled and designed to try to make it look as factory"ish" as possible. Side…
intrushions must be 3 ft away and must make in less than 10 trys
This is a remix of the Terrier Handguard from LoneWolf052 and the bottom Picatinny rail from the Utonagan Handguard Remix from HoneyBajjar. I wanted to have Picatinny instead of Mlok for the bottom rail of the Terrier since I liked the…
ITS AVERAGE!!!! - slightly longer barrel (230mm stock> 120mm >80mm 'micropp') and is an optimised and tested length with higher accuracy and MUCH less drop over ~10m . Probably best for 150fps cap games but don't have a chrono :/ * EDIT I…
My original, injection molded index mag release on my piston pump somehow snapped in half (if you look at the photo you can probably see the line where it snapped) while using an extender for it, so I modelled a new one in CAD and decided…
Hello everyone! This is my remix of N8thin 's beautiful X-shot MPP Stock-ish Stock model. I loved the stylings and feel of their stock, but I wanted a version that was a little bit longer to fit me better. So, that's what I set out to…
Lengthened stubby front end with mlok + upper rail. Uses M4 hardware for the upper rail.
Collect is still accessible, and it locks the handguard in place, meaning no tools or other parts are needed. Other features include the free-floating design, front and rear Picatinny, and slim profile perfect for a C-clamp. I printed…
Die Vorlage von GhostManta hat mich auf die Idee gebracht einen einfacheren Remix zu erstellen Viel Spaß
The original part would fall out occasionally. I redesigned this to have a slightly tighter fit and added a feed ramp the front of the magwell entrance. You will need to remove the three screws in the XShot MPP magwell area to spread the…
Print Settings Rafts: No Supports: No Resolution: .3mm Infill: 20%, 4 wall Filament: TPU
This model is compatible with the lego system.
IT Per ottenere il file originale, realizzato in Creo Parametric 10.0, scrivetemi all'indirizzo [email protected] EN to get the Creo Parametric 10.0 source file, please mail me at [email protected]
To house a simple solar charged battery for light use like electrical fencing or a small light source like a led strip in semi outdoor environment. Cells: CBAK 32140FS - 15Ah - 15A LiFePO4 - 3.2V A-Grade Solar charger: Victron SmartSolar…
Model includes body and cover. To connect them together you are going to need 3mm screws
📄 Meshtastic Node Bracket for 150 × 100 × 70 mm IP67 Case ✅ Compatibility Case Fit: Specifically designed for the 150 × 100 × 70 mm IP67 enclosure from Aliexpress I recommand using as it is the go to case for outdoor applications. IP67…
Check out my socials and other things at https://linktr.ee/KDxGP Like my creations? Consider buying me a coffee ☕ at https://www.buymeacoffee.com/KDxGP. Thank you!
EN: Box for 10 different stamp motifs. Material : Stamp handle: PLA, PETG Layers : Stamp handle: 0.3mm, 0.2mm as desired Supports : no Motifs : smiley-2c smiley-2b smiley-2a smiley-1 flat-ist-borin Stamphandle: Stamphandle…
Case for ZK-SJ20 Mppt Buck Boost Case Please note: I have changed screw terminals because I don't like the original ones! So this case may not fit to original screw terminals! Parts needed: 2x Screw terminal (RND 205-130-7.62-02P Data…
Support ventilateurs pour MPPT ou ORION Victron Energy. Ventilateurs diamètre 30mm.
Replacement castle nuts for the buffertube stock on the Xshot Motorize Piston Pump blaster. I recommend trying the 04_clearance files first and then going down to 03 if too loose, 05 if too snug. On mine the first .5cm of threading was…
Drops in, no extra hardware or work required. Print 100% infill with supports as labeled
So, here's another frontend for the XShot Motorized Piston Pump. Took me about 13 attempts, but the geometry of the frontend should very closely match the front end of the body. The main differences come down to me not really like the…
So, my crack at a shroud for the MPP, it sports two picatinny rails that are held in by dovetails and two cosmetic plates so you can color match a bit depending on your paintjob or in case of the original blaster just make it light blue…
Update 9/5/25: Added Smiley and Stern emoji plates. Easy to print plates that friction fit into place. Blank set included so you can add your own logo or design. MPP Improved sights:…
Update 7/31/25: Added hybrid variation of the rear sight Update 7/30/25: Added V2 and V3 of the rear sight. Front sight is slightly lowered to account for dart drop and longer range of pro blasters. Models are print oriented. Cut 6mm…
Spring spacers for your MPP. Available in 2.5mm-10mm sizes, can technically stack them but I don't recommend it. Start small and go from there, I don't know what the max safe precompression on the stock spring is. Print something like…
Update 7/31/25: Added a closed version. I like to see the inner workings of a blaster so I designed this open jam door. No need to disassemble the blaster. Simply snap in place and secure with the original screw. Models are print oriented…
This is a base that holds a TempPro Hygrometer. It has three spots on the bottom for 10x2mm magnets. This is meant to sit just inside the Core One directly behind the door. ThermoPro TP49 Digital Hygrometer Amazon link:…
Update 8/6/25: Fantasy themed add-ons (last photo) can be found in the remixes. Update 8/3/25: Added a small Mlok picatinny rail that can be installed in any of the mlok slots. Update 8/1/25: New Small and XS handguards available for…
Print flat with support, 100% infill, 5 walls
Modeled to resemble an old fixed stock but still retains adjustability along the buffer tube. Fits the original xshot mpp battery and also has a secondary space for storage. Models are print oriented and require support. If you really…
Multiple sizes available ranging from 1mm to 5mm. Great for those who wired in a smaller lipo. Stack together for custom sizes.
Update 9/6/25: Added V2 versions of both styles with improved grip pattern. 2 styles available. Friction fit (FF) and Hardware (HW). No support needed and models are print oriented. I recommend a .4mm nozzle or smaller due to the fine…
Interference fit wide charging handle for the X-shot Motorized Piston Pump. I didn't like how narrow the release was, so this one allows for you to technically pull it from only one side of the blaster. It is very wide , so much so that…
Update 8/9/25: Adjusted the geometry of every base to better fit the magwell. Designed to fit: MPP Blaster Magazine Up to 15 Darts Barrel BCAR (with or without a shroud) Battery (has a cutout for charging while on the base) Charger Name…
A toolless, fixed stock that reuses the stock battery door locking system. This version shortens the length of pull to just over 13". Other than gluing the ‘grill plates’ to 'retainer' all the assembly remains toolless, held together…
This mod requires the blaster to be opened, and replaces the stock collet that comes on the blaster. It does re-use the breach from the stock blaster - which is pressed into the “Replacement Internal Mate” as seen below. The collet can go…
A unique way to make the handguard standout and more public friendly. Unicorn version retains the front sight mount for the original iron sight. The dragon version uses the nose horn as a sight instead. Models are print oriented and will…
I found that the xshot bcar was loose on some of my barrels so I quickly designed this to fix the issue. Model is print oriented and doesn't require support. Uses M3 hardware. *I only have pla+ at the moment so I am unsure if basic pla…
It's my experince that 3D printed buffer tube rings, no matter how tight they were, always needed retightend after a couple of mags. Only accentuating the issue of the spinning buffertube due to the wear on the threads. This easy print…
If you enjoy my creations/remix, feel free to support me via buy me a coffee- https://buymeacoffee.com/spydergiant This is my own X-shot MPP shroud that I modeled and designed to try to make it look as factory"ish" as possible. Side…
USE DUCT TAPE FOR A BETTER FRICTION FIT Refer to slicer images for print orientation, most parts don't need support. Muzzle devices print muzzle down. M16 handgaurd requires longer barrel. M4-RAS handgaurd requires glue for the rails…
Introduction A replacement frontend for the XShot Motorized Piston Pump blaster. This shroud replaces the stock front orange piece (and its collet). It uses the tension-band barrel retention system I've been using on some of my personal…
Iron Sights Color Inserts __ Easy To Aim + Clearly Visible __ X-Shot MPP The line of sight is parallel to the barrel. Rectangular rear and front sights at same height for easy and quick aiming like classic open sights. It is best to print…
Update 8/15/25: Four new shorter sizes have been added (XS, S, M, L) making for a total of 5 sizes. The full size hanguard works best with the original barrel length. Update 8/14/25: A wrap around grip has been added to the files. Print…
Update --------- BCAR Shroud 1.1 ------> X-Shot MPP (or LONGSHOT 2.0 with EXTENDED custom barrels) + optional Barrel Color Sleeve for the MPP Wrap two to three layers of e-tape around the narrower rear section of the BCAR and insert it…
Update 9/7/25: Added a V2 version with improved grip pattern and tweaked greebling for multi-color printing. This remix has the same install instructions as the original model. Just unscrew the bottom two screws of the magwell, slightly…
REQUIRED HARDWARE : - 2x M5x30mm socket head screw - 2x M5 Hex nuts (Nylon lock nuts recommended) Can be printed without support
Simple print that uses less than 10g of filament. Adds width and grip to the existing charging handle. Making it easier to grab from either side speeding up your reload time. No need to modify or disassemble the blaster. Friction fit into…
Have you ever wanted to use an N-Strike barrel as a shroud for your X-Shot Motorized Piston Pump? Now you can! All you’ll need is a pair of M3x6 screws. The included collet on the blaster clamps the attachment securely in place, while the…
Reload With Peace of Mind Two basic versions included. Original and Shock. The original version mimics the original magazine bumper. The shock version includes cutouts that act as crumple zones(when printed in tpu) and 8mm of extra…
Print all of the original pieces for the Stock-ish stock, but only print one of the side mesh pieces. This replaces the other one. Top right corner of the cutout might not connect, but it doesn't really matter, you won't see it. Fits…
Adapter for the Comfee MPPHA-07CRN7 (or similar) mobile AC unit onto a 140mm standard hose. Best printed out of a temperature resistant filament (i used Nylon-CF; PC, PCBlend or ASA/ABS should also work). Includes an optional Anti-Warp…
Handguard/barrel shroud for the Xshot Motorized Piston Pump. Available in Keymod or MLOK. Also has an integrated QD sling mount. Friction fit- no hardware required.
At only 60mm long, the Micro-Guard is guaranteed to be the smallest modular handguard available for the piston pump. Perfect for compact builds. Featuring a variety of options ranging from modular to a built-in quad rail. There is an…
Update 11/13/25: Added scale adjusted files. These are slightly larger if you are unhappy with the original designs fitment. Includes three different versions ranging from sealed to protect your blaster from the elements to open for easy…
Update 9/4/25: Added new versions with the cheek rest built in for easier printing. Marked CR in the files. This extended battery stock secures around the original buffer tube and doubles as an anti-spin clamp. Fits the original Xshot…
Designed to snap into one of the five attachment points built into the MPP. Includes two different styles. Models are oriented how I printed them but you may have better luck with a different orientation. These are more of a decorative…
These quick print charm accesorries attach to any of the five points built into the Xshot Piston Pump. No need to modify the blaster. Includes a fully printable version and a version that uses real chain instead. Models are print oriented…
A guard for your tiny pp's! Refer to the original for the shroud's hardware to mount onto the blaster. Print with tree supports. There are two versions, one with picatinny only on the top, and one with picatinny on the top and bottom.
Me: Can I get a sweetheart storm? Mom: We have a sweetheart storm at home. The sweetheart storm at home: All jokes aside, the MPP is an excellent blaster and this shroud aims to improve it futher. Features 28 mlok slots and includes…
A remixed castle nut that allows strong hand tightening to avoid loosening or twisting of the buffer tube. It's been tested and it works extremely well. The knob ends are designed to avoid any collisions with the charging handle action.…
Stock cosmetics were changed to look to be more in line with modern types of buffer stocks, my aim was to make it look a bit like standard AR15 stock. A small modification was made to the functional geometry. Channels for inserting M3 nut…
The Fat Boy BCAR Shroud features an interchangeable design. Included are 5 different shrouds that friction fit on for easy swap. Also has a built-in clamp that keeps it secure around the bcar and barrel. Uses M3 hardware but isn't…
This is a fairly simple remix. I wanted to put a Shellington Underbarrel Masterkey on my Xshot Motorized Piston Pump. The Masterkey needs a long segment of picatinny rail to mount to, and it pumps forward to prime so I wanted a shroud…
Drop in mag release replacement for the X shot motorized piston pump. Has an extended paddle with a wider grip as well. Print as is, with support on bed only
Replacement spring rest for the motorized piston pump, if for some reason you lost yours. Or if your name is Isaac and you bought a “refurbished” MPP that was missing the spring rest, spring, and barrel, but were too lazy to return it but…
intrushions must be 3 ft away and must make in less than 10 trys
Screw reinforcement at front top of Stock-ish Stock, using an M3 x 25mm socket head screw and corresponding nut Additional hardware required: 1x M3x25mm screw 1x M3 nut Prints with same settings as original. Assemble all other parts of…
I didn't want to have to have tools in order to swap out the battery on my MPP, so I modified the stockplate (which is also the battery door) to allow the use of thumbscrews. I used these thumbscrews . I also included a version with just…
This is the barrel shroud by High Country Blasters, now logoless and with added tabs for a cleaner appearance. I printed mine with 4 walls and 15% gyroid infill. Printed at a 45° angle with the blaster-interfacing end in the air. Use…
This model is a remix of the charging handle by N8than (loose tolerance version; which is still nice and snug, as the original was incredibly tight). The only change here is a thicker top shell for added rigidity, since the original was…
I added an O-ring to the stock BCAR (Ok, “SCAR”) in the groove at the front. I think that's what it's there for. The cover then friction-fits over the stock BCAR. This is longer than the stock BCAR and will fit over and integrate well…
I used a solo pro barrel in my XPP but still wanted to use my barrel attachments and there wasn't enough barrel left to accommodate both. So, I joined the replacement collet with the silly scar nut which provides just enough space to…
Just added some triangular holes to make it look cool. There is a “naughty” version that has “3==D” at the bottom. There is also a blank version that is SFW.
Redcowl's MPP shroud pins, but with keyring slots to make them easier to remove! I highly recommend scaling them at 99% in the slicer for even easier removal.
This is a remix of the Terrier Handguard from LoneWolf052 and the bottom Picatinny rail from the Utonagan Handguard Remix from HoneyBajjar. I wanted to have Picatinny instead of Mlok for the bottom rail of the Terrier since I liked the…
Victron Energy MPPT WireBox There are various sizes available: MPPT WireBox-S 75-10/15 MPPT WireBox-S 100-15 MPPT WireBox-S 100-20 MPPT Wirebox-M 100-30/50 & 150-35/45 MPPT WireBox-L Tr 150-60/70 & 250-60/70 MPPT WireBox-XL Tr 150-85/100…
Radian charging handle for the X-Shot MPP. Uses two 8 mm M3 bolts and two respective heat set inserts with a small spring (start looking through your old bin of Nerf parts or a pen spring). I have a whole box of different springs…
A shorter barrel for the X-Shot Piston Pump. Designed for use with my BCAR and Handguard designs.
ITS AVERAGE!!!! - slightly longer barrel (230mm stock> 120mm >80mm 'micropp') and is an optimised and tested length with higher accuracy and MUCH less drop over ~10m . Probably best for 150fps cap games but don't have a chrono :/ * EDIT I…
Made a simple thin butt-pad for the mpp cause the stock is slippery. Print in tpu and glue the pad onto the stock battery cover i roughed up the surface with coarse sandpaper and used CA glue but hot-glue would probably also work. i also…
My original, injection molded index mag release on my piston pump somehow snapped in half (if you look at the photo you can probably see the line where it snapped) while using an extender for it, so I modelled a new one in CAD and decided…
Wanted one a little longer. With this 12.5mm spacer, and a 275mm long x 12.75ID barrel, it gets around 185-190 fps with fresh darts.
Hello everyone! This is my remix of N8thin 's beautiful X-shot MPP Stock-ish Stock model. I loved the stylings and feel of their stock, but I wanted a version that was a little bit longer to fit me better. So, that's what I set out to…
Lengthened stubby front end with mlok + upper rail. Uses M4 hardware for the upper rail.
This is the Pumpprime Competition Addon for the ScarT Mk17 Blaster: Here is a little firing demo: Here is the assembly Guide:
I made this model for a railway model. I searched the internet for lampposts, but they are not cost-effective, especially if you need a large number of them. That's why I modeled it and want to share it with you. I recommend turning it on…
