Screw Reinforced X-Shot MPP Stock-ish Stock
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
N8thin's X-Shot MPP Stock-ish Stock with an M3 x 25mm socket head screw reinforcing the top front.
- Rating
- 5 / 5
- Likes
- 33
- Downloads
- 119
- Makes
- 2
- Views
- 873
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Screw reinforcement at front top of Stock-ish Stock, using an M3 x 25mm socket head screw and corresponding nut
Additional hardware required:
- 1x M3x25mm screw
- 1x M3 nut
Prints with same settings as original.
- Assemble all other parts of the stock first, as normal.
- Insert M3 nut into the front of the right main body piece.
- Insert the screw from the left main body piece, screw into the nut to secure halves together.
I like the lines and shoulder feel of N8thin's Stock-ish X-Shot MPP stock, but found it separated at the top front pretty noticeably. This made me a bit concerned about it splitting open/in half in rough use. Having glued one up I found that it was pretty easy to see visible glue, get discoloration or otherwise make a bit of a mess of the job, and figured perhaps others would have the same experience. So this is a very simple change that trades the lovely hardware-less nature of the original design for a bit of peace of mind that it won't split in half. Consider it a sidegrade rather than a strict upgrade. The grill pieces still require gluing.
This was based on the STEP files provided in the original listing. While the stock Stock-ish stock (….yeesh) has been updated (8/8/25) to remove the compliant/integrated locking lugs, the STEP files had not been updated. When I noticed they were still present in the STEP file I chose to retain the rear/bottom lug, because it was larger and IMO less likely to get broken anyway, and replaced the top front one with a hole on the left hand side main body, and a slot you can drop a nut into the front of on the right hand side main body.
These files are not to be used or sold by Frontline Foam, by downloading these files, you agree that you are not Frontline Foam and/or related to Frontline Foam or Derrikk Sun.