Remixed Xshot MPP shroud Motorized Piston Pump
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Combines elements of three other things
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 34
- Makes
- 1
- Views
- 335
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Toys
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a little hard to explain but here goes.
This remix combines the basic shroud from Spyder's thing: https://www.printables.com/model/1379053-spyders-mpp-front-shroud-x-shot-aeb-motorized-pist
with the top and bottom rails from https://makerworld.com/en/models/1844886-atlas-srs-hand-guard-for-the-xshot-mpp (because I wanted the long continuous top rail)
and clears out some hollow space in the front like https://www.printables.com/model/1649341-spyders-mpp-short-king-opened-front
but leaves in more of the original ~33mm hole for the barrel collet.
This remix is intended to:
be really strong
provide a lot of rail
The "no side rail" version should be compatible with the side decorative pieces from the original Spyder version but I haven't tested it.
The "Atlas rear rail" is modified only slightly from the original from atlasunit22. Basically it has a groove down the center like the other rails.
I do believe you'll need supports on the inside of the round part. Also for this piece, I used a brim on the build plate since relatively little of the model touches it, but you may not need that.