SRAM Large Bleed Block - For SRAM Code Brakes
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
SRAM Large Bleed Block similar to the one that comes with their bleed kits. Intended to be used with SRAM Code brakes.
- Rating
- 5 / 5
- Likes
- 50
- Downloads
- 1,097
- Makes
- 6
- Views
- 3,755
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution
This is a replica of the large bleed block that comes in the SRAM bleed kits. It is intended to be used with SRAM Code RSC and SRAM Code R brakes.
DB8 compatibility: As reported by @Radek, this bleed block can also be used with SRAM DB8 calipers with a very small adjustment. The only required change is to reduce the height (Z dimension) from 12 mm to 11 mm – all other dimensions remain the same and fit the DB8 caliper properly. You can do this either by editing the STL or scaling only the Z axis in your slicer.
Printing Instructions
Rafts: No
Supports: Yes
Resolution: 0.20
Infill: 50%
Wall Count: 4
Top/Bottom Layers: 4
Filament material: PLA