SRAM Large Bleed Block - For SRAM Code Brakes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
SRAM Large Bleed Block similar to the one that comes with their bleed kits. Intended to be used with SRAM Code brakes.
- Ocena
- 5 / 5
- Polubienia
- 50
- Pobrania
- 1097
- Wydruki
- 6
- Wyświetlenia
- 3755
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
This is a replica of the large bleed block that comes in the SRAM bleed kits. It is intended to be used with SRAM Code RSC and SRAM Code R brakes.
DB8 compatibility: As reported by @Radek, this bleed block can also be used with SRAM DB8 calipers with a very small adjustment. The only required change is to reduce the height (Z dimension) from 12 mm to 11 mm – all other dimensions remain the same and fit the DB8 caliper properly. You can do this either by editing the STL or scaling only the Z axis in your slicer.
Printing Instructions
Rafts: No
Supports: Yes
Resolution: 0.20
Infill: 50%
Wall Count: 4
Top/Bottom Layers: 4
Filament material: PLA