1 / 4
SRAM DUB Crank Arm Cap / Kurbelarmkappe
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Cap for DUB crank arms - only for design purposes, does not fullfil the specs of the original part.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 112
- Makes
- 0
- Views
- 342
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Since I could not find it anywhere and have already lost the original part twice, I designed the crank arm cap myself. A replacement (not even an original) costs around € 8,- on Amazon.
If you do not have the tool to screw it in, you can carefully press it into place after screwing it in a bit with your fingers…
Would very much appreciate, if you'd post your make! :)
I printed it as follows:
- Material: PETG
- Layer Height: 0.1 mm
- Nozzle Size: 0.4 mm
- Printing Position: Upright (see pictures)
- Supports: Auto-generated
- Infill: 100 %
Only for design purposes, does not fullfil the specs of the original part!