Roof rack screw plug cover for 2014 Subaru Outback
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Orientacyjna cena wydruku pliku
0,69 € – 0,84 € netto (bez VAT)
Dla pliku: screw_plug_0.2mm_ASA_MK3S_49m.gcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 0,77 € netto (środek widełek).
- Masa podana przez autora
- 4 g
- Czas druku podany przez autora
- 49,2 min
- Materiał u źródła
- ASA
- Materiał wyceny
- ASA
- Drukarka wyceny
- Bambu Lab X1 Carbon - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
Replaces the plastic screw that fills the extra roof rack hole for 2014 Subaru Outback...
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 152
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
This replaces the plastic screw that fills the extra roof rack hole for 2014 Subaru Outback... It keeps the leaves and gunk out when you're not using that mounting position.
Safety note: this is not a replacement for the load-bearing steel bolt that holds the rack on… It's too short for that, and you should definitely NOT use plastic for anything load-bearing.
Model notes: Embossed version has “T30” on the screw top… Other version is identical minus the embossed drive bit size. Screw thread is M8x1.25, which isn't quite right, but works… I could not determine the exact size of the original. But it works… 🤷
Print with ASA because a lot of UV light hits the top of your car. No supports needed. Check the awesome Prusa Materials Table if you don't print ASA often.