Liczymy pasujące modele…
Note: XT30U-F are conventionally power outputs , not inputs. You don't want live pings exposed when the connectors are exposed. So don't use this to power your project. Thanks to niZmo for pointing out this omission. M3 mounting hardware.…
I'm running multiple tools and found that the BTT provided cables were unshielded and interfering with each other when rubbing against one another, causing bus communications to freak out. I made new cabling with some LDO FEP cable, but…
Various designs for XT30 connectors Here you will find my designs for the XT60 size and MR30-M . News 12.03.25 Step files available 22.11.23 added design of angled and round mounting bracket 02.11.23 added design of standard mounting…
A purpose build XT30 2+2 plug designed for the 🥰 BTT SB2209 / SB2240 toolhead boards. Built with a minimal footprint to keep your cable routing clean and uncluttered. Companion Model: Use the Cable Bridge PLUS to form a sleek and ultra…
Files for the XT30, XT60 and XT90 are now here…. EDIT: 8/10/22 Created the parts with raised letters. Mark them with a felt pen to make them easy to stand out. I got tired of fighting to keep the plug and wires in place while soldering…
Hi Internet Sim Racers, After doing a final test print of my Thrustmaster Txxx 70mm hub adaptor kit... I feel it's ready for public thrashing. Ok, so whats in the pack I hear you ask... through some form of audio bug I have in your…
EZ to Grip XT60 and XT30 Caps to cap, cover, and tag your batteries especially when you travel. Printed in PLA UPDATE: 2 Versions - TPU VERSION - adjusted for a snug fit! Resolution: 2 Walls/Perimeters - 3 or 4 top/bottom - .28 Layer Height
Summary A phone holder for the Thrustmaster T300 (RS) wheel. Currently fitting my iPhone 12 very well, but similar phones might also work. Very nice in combination with the Simhub Dash to show some metrics during sim racing. Printing…
I made this small XT30 panel mount adapter as I need one to mod my Bambu. To install the connector inside the adapter you'll perhaps have to file a bit the connector to fit it, but for sure it won't move. I strongly advise to print the…
Most XT30 housings on Printables are designed for bulky RC/drone battery leads, typically using 14–16 AWG silicone wire for relatively high-current RC/drone applications. I needed a connector housing for a much thinner cable — an aquarium…
A better way to attach your t300 wheel and you can skip the annoying screw.
Remix of XT60 Plug Housings resized to fit TX30. I printed it in TPU and the fit was really snug, non-flex materials might need ~1% upscalling.
…Please be sure to hit like & post a make, I'd love to see your prints! Print standard VORON settings, no supports required!…
This is an XT30 / XT60 / XT90 Cap, it fits over the female side (battery side) of lipo batteries. It has a small lip on the bottom to make it easier to pull apart. Should fit snug. I use these to determine if the battery is charged or…
Hi, I've made remix existing Geprc GPS mount and fit it to use with GEPRC Cinebot30. You can use it with two antenas RX and VTX. Best to print from TPU or other flexible filament.
v2 of the mount, very easy and fast to install with 8 large zip ties and 4 pcs M6 x25 screws the Logitech G29 pedal to Playseat challenge seat Also working with Thrustmaster t300 RS Print instructions PETG, print 2 times the G code or 4…
Designed to fit the Amass XT30U-F model that Tattu uses in the smaller batteries. Dimensions from the technical drawings with 0.1mm tolerance.
What for would I need a 3D printed T30 Torx bit? You may have found my set of 3D printing optimized set of screws and nut already. This contains a set of Torx head screws as well. https://www.printables.com/model/1124580 But I don't have…
This is a mounting bracket for a GL.iNet Beryl AX Wifi 6 GL-MT3000 travel router . I needed a robust mounting bracket for this travel router to mount in our RV. I plan to merge this mount into a larger mounting bracket to hold a POE…
Reinforced replacement for the shift pedal hinge for the Thrustmaster T300 racing wheel. It should be the same part for the T150. For a smooth operation print the hinge in 0.1 mm layer height. I additionally added a drop of grease. Should…
Printed with no supports, .2 layer height, 4 top and bottom layers, 3 side layers, 40% infill.
The Fuji X-T10, X-T20 and X-T30 are great little cameras, but the grip is a bit small for larger hands: your pinkie has no-where to go except under the camera. This newly updated grip provides full support for all of your fingers, yet…
F1-inspired steering wheel Easy installation just unscrew the old steering wheel by unscrewing the 6 central screws then screw on the printed attachment . The attachments are screwed together using m4x25 screws and nuts Inspired by…
Liked the original and modified it a little
Remixed from VZPHOTOs Fuji X100V Thumbgrip. For XT20, I needed it to be a little longer so here it is.
Kappen für XT 30 Stecker. Kann für beide (Stecker und Buchse - siehe Bild) verwendet werden. Die Stecker werden einfach nur in die Kappe gesteckt und halten so recht gut. Am besten mit der kleinen Seite (Kabelausgang) nach unten slicen.…
Hall Sensor Bracket replacement for Thrustmaster T300 T300RS TX Worked for me, use supports and enough infill. Hope it helps someone
Battery caps for XT30 conector it protects the conector and if you use a color code you can identify if the battery is full (green) or empty/to charge (red). Quality TPU really makes a difference in these small parts. I use sainsmart TPU…
This is a completely original model, and is the result of 16 different iterations on the design. I tried to create the most modular (for future adaptability to other wheels) and compact unit as I possibly could and printable without…
Tool tag for BT30 tool holders for easy identification. Print Settings Printer: Prusa Resolution: 0.250 Infill: 25% Category: Tools
Layer Height - 0.1mm Infill - 20% Recommended Material - ASA or PETG
Steering wheel based on Ferrari 488 GT3 design GitHub Repository: https://github.com/Alby312/GT3-488-Wheel Wheel of 30cm of diameter, based on real wheel of Ferrari 488 GT3 with 12 push button 2 rotary encoder and 2 magnetic paddle shift.…
Disclaimer: These could be used as a permanent solution, however because there's nothing stopping the duct from clamping onto the prop you will almost certainly be blowing props whenever you bump things. As pictured it was printed in…
This is Magnetic Paddle Shifter MOD for Thrustmaster T300 RS. BoM: 1x 5mm or 8mm bracket 1x M3x10 1x M3 nut 4x 10x3 (or 8x 10x2) mm Neodymium magnets 1x 2-component adhesive (Epoxy) Video: https://www.youtube.com/watch?v=PORMB1qgojM Print…
Introducing the GL-MT3000 Socket Mount! This meticulously designed printable allows you to securely mount your GL-MT3000 router without the need for complicated installations or additional hardware. Crafted with precision and ease-of-use…
XT30系列尾套外壳， 使用ABS耗材打印，喷嘴0.25 ~ 0.4mm。 XT30 series tail boot casing, printed with ABS filament, nozzle 0.25 ~ 0.4mm。
We use this to wall mount tooling for our ZX45 mill at Stockholm Makerspace . You can use this for any kind of 30-taper tooling, and the bottom is open to accommodate different styles of pull studs if that is something you do have on your…
Taking the opportunity of upgrading from i3 to MK3.5, i decided to rework the way i connect my PSU (which is relocated outside of my LACK enclosure). The new board has metal case, and thus must have the earthing line added, so my old…
This is a printable zero clearance throat plate for the Ryobi BT3000 Table Saw. This is version 3 of the throat plate and should work as printed for most cases. I am working on a v4 that will have a joint for providing a more robust…
Simple BT30 Tool holder storage. Print one and store your dial indicator in it or slice 10 of them together to make a "job pack." Included is another holder the same footprint to hold additional tools (inside their plastic cases) for…
Kayoumini 2.5 XT30, DJI O4 antenna and ELRS holder
Hi Internet Sim Racing Fans, Another quick upload by request. This is a remix of my original 70mm PCD Thrustmaster hub adaptor. Except this one is rotated 30 degrees to fit this…
Adapter for the T300/T500 to Bambu Hot End. DO NOT ATTEMPT UNLESS YOU'RE MECHANICAL! -Prints with no supports PARTS LIST: Hot end: Bambu X1 clone https://a.co/d/dsEMpa1 Inserts: 2x M3*4 4x M2*3 https://a.co/d/7Aj9c0x Bolts: 3x M3 x 10mm…
Spona bezpečnostního pásu Nissan X-Trail T30 vhodná pro deaktivaci onoho nepříjemného pípání. Vhodné třeba když máte na sedadle spolujezdce odloženou tašku (neschvaluji jízdu bez zapnutého pásu). Nissan X-Trail T30 seat belt suitable for…
Purpose Simple addon to the back of Thrustmaster P310 (and other similar rims*) that converts them to magnetic paddles. Makes the feel of the paddles feel much more premium, and provides a nice solid point where the paddles aggressively…
…Please be sure to hit like & post a make, I'd love to see your prints! Mount a USB camera on your T300! With hidden channels for cables! Use original bolts to mount. Be sure to check out a matching model for a physical button on the…
I redesigned the antenna mount for easier storage and transportation. 20240902:Upadted Folding Antenna Part 2.
Torx is a wonderful standard, better than just about any of the others out there, and lends itself well to being used in printed parts. I often use them and will have to dig up my previous parts to see the dimensions that worked in the…
Is your USB cable on your thrustmaster T300 or TX steering wheel broken, or is it starting to break? This thing is just for you. This mod gives you the option to use a standard USB-A to B cable for connecting your steering wheel to your…
This model replaces the stock clamp screw on your T300 or T500 wheelbase and allows for a secure fit to your desk. What you'll need: 3D printer This 3D model file (available for download) M10 hex bolt screw (length 80mm or 100mm) 2x M10…
Hi Internet Sim Racers, If you've printed a 70mm Hub adapter from any other modeler, and you've decided you want to extend or put in an insert for your 6 Pin DIN connector in the hub to make it connect to the wheel like the original.. You…
This is an XT30 cap to prevent shorts when keeping LiPo batteries in a bag and to indicate charge. It's ribbed for easier removal, even with a tight fit. Also included is an STL as a regular cap instead of a doubled one. Pause the print…
Original Fusion files included Printed on a Prusa mini in Polymaker PLA This work was based on other opensource work, and may inherit their license. Micrometer: https://amzn.to/3WaB8pG My other Gridfinity Designs: 1/8" Endmill Holder:…
Wall Mountable Wheel Holder For Thrustmaster T300
The wheel adaptor will fit over the main button relay but you will need to change the Hex bolts to M4 16mm instead of its default ones. To attach the wheel - wood screws 8gauge 14mm x6 screws My settings .2 layer height 3 walls 60% infill…
XT30 Connector case I have made 2 designs, one is for a round wire that is approximately 3.5mm and the other is for a 16AWG/1.5mm2 wire (the proper wire thickness for xt30 according to the connector datasheet). Print settings used:…
Some simple designs of a cap for XT30 and XT60 batteries to help protect the ends. Perfect for FPV. Printed in TPU at 0.2mm Layer height on a Creality Ender 3 Neo. 100% Infill for best results. If you print this in any other material let…
to install xt30 Male you have to cut off the bumps (for female such actions are not necessary)
BT30 tool tag holder. Print Settings Printer: Prusa Supports: Doesn't Matter Resolution: 0.250 Infill: 25% Notes: Use 1/8" x 1/2" magnets for the back of the holder Category: Tools
In FPV (First Person View) drone flying, the application of positioning technology has become increasingly important. Positioning technology not only reduces the likelihood of losing the drone but also provides a stable flying experience…
You need 4 x 12mm m4 screws, the original ones are not long enough. Sand the surface with very fine grain paper.
This tool caddie is quite large, I printed it on a K1 Max which has a 300 x 300 mm build plate and had to turn it 45 degrees. You can print it as one piece or print the legs separately.
Since the thermal design of the amp is exceptionally poor because the heat generating components aren't directly connected to the housing and do not allow the amp to be cooled properly I designed this housing which is designed for the amp…
Improved bral mount for the T300rs GT steering wheel. Eliminates the play and noise of the original mount. A rubber strip can be glued in the recess to prevent slipping.The round recess on the underside is a place for a metal washer.Glue…
Upgrade Comgrow T500/T300 hot end cooling fan to quieter larger fan. Fan: WINSINN 40mm Fan 24V https://a.co/d/aEnkuMs
This elongated buttons and D-pad button have been designed specifically for using by with adapter for Thrustmaster T300RS and steering wheel from of a real car.
Needed somewhere to put the xt60 on my Grinderino..
I Created a simple Nozzle Box for 8x Sovol SV08 & Comgrow T300 Nozzles. Minimum 2 Walls Minimum 15% Infill No Supports needed! Needs under 100g Filament. You can ignore the support warning in your slicer.
It's a snug fit. Once it's inserted it will snap into the gaps and won't come out. I recommend soldering and do your wiring first, before fitting it into this connector.
I didn't like the stock heat shrink that most XT60 to XT30 adapters come with so i designed and printed this in TPU. Print in TPU can be printed without supports but printed better for me with supports turned on. Easily to install, remove…
This design tips holders up so the taper is horizontal. For tools ~60mm gauge length they sit perfectly but drill chucks or longer gauge tools may have too much weight forward of the taper to sit well. Made with a 3x4 Gridfinity pattern…
This holds 4 BT30 tool holders in a 2x5 sized gridfinity base. The main holder is by Jonny Wood (049machine on Instagram), and with his permission I mated it to a gridfinity base. Note that in the pictures, I haven't made the bases for…
Wir sind vom VT300 zum neuen Akkusauger VK7 gewechselt. Leider müssen dann alle Aufsätze neu gekauft werden. Mit diesen beiden Adaptern ist es möglich sämtliche Adapter zwischen dem VT270/VT300 und dem neuen Vorwerk Akkusauger VK7 zu…
Diffuser for the godox it30 pro. There don't seem to be any accessories available for this flash, either first party or on any 3d parts website, so I decided to design my own. Also the TR-S tilting adapter isn't available in any store…
I have some Audio Engine A2+ speakers and they're excellent but about a year ago the capacitors or something on the internal DAC started going bad and the right passive speaker was getting quieter and quieter. I was having to…
Antenna mount for the Foxeer Lollipop 4 antenna with short tube and UFL connector for the ImpulseRC Micro Apex Frame
⚠ Note: Thingiverse Customizer seems to have currently issues with generating customized models.Alternatively just download the scad-file and run it yourself on your local machine. When doing so make sure to also download the segment STL…
My Baby Ape didn't come with the little antenna tubes, so of course by the end of day 1 I'd tangled one of the trailing RX wires in the prop and torn it off :( Hence this stubby sharktail that takes the place of the TPU one that comes…
This is an add-on part for my Voron-inspired PC case project: Corvus PC - Voron Inspired PC Case It is designed only for the Alphacool NexXxos ST30 360mm radiator and I cannot guarantee compatibility with other radiator models or…
Edited so that the main piece is in 2 halves with overlap in the middle so it can be printed on smaller printers
This is a request from PLG_Designs. He was gratious enough to ask permission to modify my design. I was only too happy to make the changes he requested. All the best with releasing your AMG Wheel mate. It looks great! Cheers, RamjetX…
I got a SB2209 USB with a broken cable right before Chinese New Year and had no customer support for weeks, so I had to make my own cable by replacing the plugs on a 65W shielded USB-C cable. XT30 2+2 requires soldered power wires but…
connects the t30 to the top of the case to improve thermals
This remix features a deep counterbore hole for the holders. Same as the original, this is fast to print and easy to install. You'll need four M6 screws and eight zip ties. Works for Thrustmaster T300RS and Logitech G29 on the Playseat…
Recommended Print in TPU. No supports needed, Pre orientated. Separates Voltage and Ground. Securely holds XT30 to Capacitor. Solder Capacitor to Pigtail. Press into TPU. Solder to ESC. Capacitors seems to come in at different sizes with…
This is a lightweight case I created to safely carry the GL.iNet Beryl AX (GL-MT3000) router in my luggage. It only weighs 21 grams and is printed in vase mode. (The router weighs 198g without any accessories.) Printing Print 1 body + 1…
This housing lets you make a triple XT30 connector. I use this one for extending the PSU cables of my MK3. Print …at 0.2mm using a 0.4mm nozzle. Feel free to use any solid filament. Support is not required. Additional parts / equipment…
Equipped with a caliper and a little bit of sensible guessing I tried to be as close as possible to the original part.
Phone Holder Mount for Thrustmaster T300 (RS) X Sparco R383 Wheel. This Design raised by 3,4cm to accommodate 1:1 Wheel
This mod consists of 2 prints one for the internal hinge that normally brakes, making the shifts even more spongy and another to attach 2 magnets to make the gear changes stiffer and quicker (maybe). You will need the following hardware…
Here is a modular frame for 1/2/3 or more two-digit 7-segment counters, designed by @Flower3D_1945812. All tolerances are set to 0.25 (as 0.25 wall-to-wall). This must be enough to glue the parts together without much filing. I recommend…
Crashing my Volador VX3 FPV quadcopter repeatedly caused my camera to change angle or get damaged, so I designed this thing. It fits Walksnail Moonlight with filter, or any other 19 mm FPV camera at fixed angle of 30°. Integrated lens…
A double sided battery cap allowing you to keep track of batteries that are fully charged or depleted.
I didn't like how the power cable was getting pulled so I made it fixed to the side of the drone. Petg works fine. TPU is best. PLA is not suggested. any suggestions to make it better are welcome!
I had the issue that I could not mount the T300 wheel far enough away from me. The reason for this is the “lip” on the front of the wheel that only allows one mounting position on the playseat challange. I designed this simple spacer that…
XT30 to XT60 connector for fpv. STL is 5mm high STEP for change to your desired height Print in tpu with good profile
Remixed a nice base design. Made the antenna hole a bit bigger so it fits easy without slipping out and made it way longer, so the antenna stays secure. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No…
This is a very clean install as you can see from the photos. I prefer this to the 3D printed XT30 mount provided by IFlight/Chris Rosser as this allows for a more central battery position (centralizing the weight balance) and also this…
