1 / 3
Alphacool NexXxos ST30 360 Radiator Mount for v.PC Voron inspired PC — zdjęcie 1
1 / 3

Alphacool NexXxos ST30 360 Radiator Mount for v.PC Voron inspired PC

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Alphacool NexXxos ST30 360 Radiator Mount for v.PC Voron inspired PC

Ocena
5 / 5
Polubienia
33
Pobrania
107
Wydruki
1
Wyświetlenia
845
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
GNU General Public License v3.0

This is an add-on part for my Voron-inspired PC case project: Corvus PC - Voron Inspired PC Case
It is designed only for the Alphacool NexXxos ST30 360mm radiator and I cannot guarantee compatibility with other radiator models or thicknesses.

🔹 Notes
  • Intended for use with Alphacool NexXxos ST30 360mm Radiator: Affiliate Link

  • This mount is very specific to my build and is not included in the base case files.

  • You may need to adapt or remix it if you are using a different radiator size or brand.

  • Provided as-is for anyone who wants to replicate my setup or create their own variation.

  • REQUIRES use of the Optional "Top Hat" Add-On for the v.PC.

📌 Print Settings:

Scoop Print Parameters:

  • Perimeters: 3

  • Top/Bottom Layer: 5/4

  • Layer Height: 0.2 mm

  • Infill: 20%+ for strength

  • Material: ASA/ABS recommended, PETG may work, PLA not recommended!

Radiator Mount Parameters:

  • Perimeters: 5

  • Top/Bottom Layer: 7

  • Infill: 40%+ for Strength

  • Material: ASA/ABS/PC-Blend/PC-CF Recommended

⚖ License
  • Released under the GPL-3.0 Open Source License. Remixing encouraged, but please credit and link back to the original design.

  • If you adapt this to fit other radiators, consider sharing your remix with the community!

💡 Support
  • Please consider supporting my work on Patreon or via my other Social Medias: [LinkTree]

Tagi