Slick WDT tool for medical needles (luer taper)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An updated model of my WDT tool for medical needles (luer taper) model. A more slick design :)
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 455
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
The new WDT-Tool with a slicker design :)
Here is the old one: https://www.printables.com/model/460188-wdt-tool-for-medical-needles-luer-taper
For a perfectly distributed and homogenized coffee bed you'll need a WDT-Tool. Just add two 6x3mm magnets while printing and stick the mount with double sided tape to the wall of your choice.
I used five of these needles: https://www.shop-apotheke.at/arzneimittel/D2050806/sterican-standardkanuele-gr-2-g21-x-1-1-2-zoll-0-80-x-40-mm-gruen.htm . They are not sharp, so the risk of hurting someone is low. But you can play around with any needle sizes.
I hope you like it! And if you encounter any problems, let me know!
If you want to buy me a coffe: https://paypal.me/kododo :)
