Liczymy pasujące modele…
I wanted a bit more control of the needle holes and remodeled it. Included the f3d file so you can do that too. Added some aesthetic modifications and some flat sides for slightly easier handling. The needles I used were 0.4mm diameter,…
Easy to use WDT Tool with stand. For assembly you will need 6pcs of acupuncture needles of size 0,4 (also used for nozzle cleaning. Bend the needle several times in the handle area before inserting in WDT tool to get the perfect fit. By…
Since I wanted to hang my WDT-Tool next to the tamper of my Lelit Mara X Espresso machine, I:ve merged the two models together. Print with supports on bed only. Print with PETG or ABS, PLA works if you use it in the back of the machine…
Even though there are lots of WDT tools on Printables here are the reasons I created one myself; I don't want plastic moving parts because friction will inevitably cause micro plastic particles in the espresso I like manual control and…
Added a WDT tool hole in the center of the dosing funnel spot.
This thing was crowd designed by the members of the Espresso Aficianados Discord . If this design or espresso interests you, hop in and say hello! The Tool A nine pronged WDT tool. This was designed for 0.4x75mm 0.35x75mm acupuncture…
A remix of aclmech's excellent WDT design to use the installation mechanism from vonbauernfeind's also excellent WDT. This one is designed to fit a specific 0.4mm x 75mm 3d printer needles that have a handle on the blunt side. I used…
Just the base part so it fit the Gaggia Classic porta filter. I have not try it yet, but I hope it will work. I can make some changes of you want
Another WDT tool for coffee lovers and hobbyists, made by one. Printed with standard 0.2mm PLA profile on PrusaSlicer and with organic supports on all 3 pieces, and brim in both Caps. After printing the model, you will need five 107mm…
The WDT (Weiss Distribution Tool) from MHW-3BOMBER features a great design with one small flaw: at its deepest setting, the needles protrude, which is exactly what I need for my portafilter. This slim stand is designed to be just deep…
I have this tool basically in daily use since I released the files in Dec ’24, and mine has held up ever since without any maintenance. Changes V2: Thickend the part where the M3 screw goes into. If you have V1 you just need to reprint…
I needed it for storage, but maybe it would also be helpful for traveling
Designed for 58mm basket tools. Definitely not one size fits all, but it may be helpful to some. Remix at will :)
Hello everyone Here is a remix of the remix of a Makerworld part. https://makerworld.com/de/models/746147?designId=746147#profileId-679191 I put the fixed needle back on the SpinRing and removed the crank holder. The MainBody and TopCover…
A nine pronged WDT tool that's printable in a business card size. This was designed for 0.35x75mm acupuncture needles with a 30mm handle. I used https://www.aliexpress.com/item/1005001467649993.html . Dull the tips of the needles on an…
I wanted a bit more control of the needle holes and remodeled it. Included the f3d file so you can do that too. Added some aesthetic modifications and some flat sides for slightly easier handling. The needles I used were 0.4mm diameter,…
A holder which can fit the WDT tool, prevents needle from bending from childish act
Ein einfaches WDT- Tool und magnetischer Trichter für 58mm und ein Ständer für beides. Braucht wenig Platz und schafft Ordnung. Es braucht dazu: 1 Kabelbinder (nicht zwingend aber sehr hilfreich) 5 Stück 0.4mm Akupunkturnadeln für…
Description This is a simple model, there are other WDT tools out there, but I like to share it because I found something interesting which make my design unique: The 3D printer nozzle cleaning needle, that you probably already have a…
The new WDT-Tool with a slicker design :) Here is the old one: https://www.printables.com/model/460188-wdt-tool-for-medical-needles-luer-taper For a perfectly distributed and homogenized coffee bed you'll need a WDT-Tool. Just add two…
The holder might be a bit specific because i only got the brushes from an online shop
Another Coffee Tamper with WDT tool for coffee lovers and hobbyists, made by one. It was made according to the dimensions of the Sanremo filter holder that uses a 58mm tamper and perfectly balances the weight of the filter holder without…
I was delighted with BooKoo Coffe's electric WDT tool, but missed the precise planetary gearing of the Umikot. So I decided to combine the best of both worlds. This remix is suitable for 54 mm portafilters (Sage / Breville). Print the…
I wanted to fix an issue I had when trying to use the Bookoo WDT Tool with the Ninja Cafe Luxe portafilter due to its unique dimensions. This project is intended to make a version of the funnel and portafilter holder that will work with…
Enhance your espresso-making precision with the Leverpresso WDT 51mm. Designed for the Weiss Distribution Technique (WDT), this tool helps break up clumps and evenly distribute coffee grounds in your portafilter, ensuring better…
Please Note This is more of a proof of concept than an actually useful WDT. Although this tool does sort of distribute your coffee, it does so very slowly . Also it is pretty loud while in use. How it works This WDT works by pushing the…
Easy to use WDT Tool with stand. For assembly you will need 6pcs of acupuncture needles of size 0,4 (also used for nozzle cleaning. Bend the needle several times in the handle area before inserting in WDT tool to get the perfect fit. By…
58mm Rancilio WDT Coffee Grounds Distribution Tool Found its best to heat up the head of the pin with a lighter and pull it into the body a bit to inset the pin. all the caps are made to glue into place. handle threads into the tallest of…
The stand is designed to work with the popular 9 prong WDT tool by jkim_makes . The simple version holds only the WDT tool and a dosing ring/funnel. The basket dummy ring should fit any 58mm dosing ring/funnel, but I highly recommend my…
Here's a planetary gear WDT tool I made to suit the Breville Barista Express. Designed to help with even espresso distribution Key Features Adjustable Height - using Part E with up to 20mm of travel. You Can also cut the WDT needles down…
This top part is designed to fit a 2x6 magnet (printin place).
This is an espresso distribution tool, adapted for the Lelit 57mm portafilter (matching Lelit Anna and Anita). It locks onto the portafilter, making it easy to use. Thanks to: iliasl for his E61 version:…
This object was made in Tinkercad. Edit it online https://www.tinkercad.com/things/82dEubKirxX Looked at loads of these but they looked a little complex so I made one. I bought the cheapest 0.4 nozzle cleaners I could find on ebay:…
I offer the 3d files of my KAVIO WDT tool with magnetic handle, tamper, funnel and distributor (for 58mm) so that you can print your own. The model is a registered design in my name with the German Patent Office. It is intended for…
This WDT is portable, fits nicely in the original case from Outin, and with 6 needles it's much easier to prepare your large puck (the 16 to 18g), with a sleeve to protect your fingers and the case from an unwanted accupuncture session.…
An accessory station that fits multiple filters and tools
Since I wanted to hang my WDT-Tool next to the tamper of my Lelit Mara X Espresso machine, I:ve merged the two models together. Print with supports on bed only. Print with PETG or ABS, PLA works if you use it in the back of the machine…
Recently upgraded my original 2023 design with ball bearings, bolder/stiffer needles, “glide rings” for additional smoothness, and visual tastefulness. Printed parts: QTY. 1 all parts unless listed below QTY. 2 ‘SUNCHASR-GLIDERING’ QTY.…
I remix this model to work with my 54mm portafilter with 2 ears. You can download the rest of the files from Cereal Fixer. Print files needed: https://makerworld.com/en/models/598790-bookoo-ewdt-54mm-breville-the-bambino#profileId-520866
Initially designed with a clicky height adjustment in mind in order to the needles to effectively touch the bottom of the basket for different basket depths, but didn't turned out so well. However, if you encounter that the height is a…
This simple variation of the classic WDT tools is designed with slightly loose tolerances to ease needle insertion and accommodate epoxy gluing. BOM: 8x 75*0.35mm acupuncture needles. You can buy them in bulk on Aliexpress. Epoxy glue…
This is a very simple remix of the magnetic clip that jkim_makes and the rest of the team made for the WDT tool. I had 6mm x 3mm magents laying around instead of the 5mm x 2mm ones the clip was originally designed for, so I remixed the…
A simple magnetic mount for a WDT tool so I can keep it tucked away on the side of my espresso machine. The sloped top profile makes it a bit easier to toss the tool back in there. As for the specific WDT tool I have… I got it secondhand,…
Small remix to make this tool holder printable without supports and to have an more "organic" look
I made this mod to firmly, yet easily hold the portafilter in place so that the WDT tool doesn't want to tip over while you are spinning the top. I found that unless I was being very careful while using the WDT, the fact that it is top…
print the model recommended on high infill and then take around 10 needles hold them with a pliers and heat them the carefully push them into the model
This is my take on a WDT Tool for distribution of espresso grounds after grinding. Requires 5 0.4mm stainless steel nozzle cleaning tools. I printed the two parts of the tool together at 0.2 with adaptive layers turned on, and the threads…
Even though there are lots of WDT tools on Printables here are the reasons I created one myself; I don't want plastic moving parts because friction will inevitably cause micro plastic particles in the espresso I like manual control and…
58mm portafilter holders on a rail designed to use the existing mounting points and stock screws for the case of a Decent Espresso DE1Pro or DE1XL. Still fits into the transport suitcase easily. There is now a variant with a multi-pocket…
Features: Nine needles Accepts varying Needles length Slight outwards draft angle Easy maintenance Easy needle replacement Fast print Beautiful Print instructions My recommendation: • 0.15mm layer height • 30% Grid infill • 3 Perimeters
Changed to fit a countersunk M3x8 hex socket screw
There is no way to find replacement needles for this specific distributor tool. So when they break, you're just out of luck on getting this to work. But there are plenty of needles for normcore tools. Print with 0.25mm nozzle. You might…
Follow the instruction from the original remixed design: https://www.printables.com/model/1227062-electric-wdt-umikot-x-bookoo-coffee-54mm-version-r And from here:…
It uses three needles of 0.4mm diameter normally used for cleaning 3D printer nozzles. The needles I had used have 35mm long coil part. One M3x6 or M3x8 screw is used to secure the bottom part the the upper one. I have used Fuzzy skin on…
Redesign of WDT tool to incorporate 5 T-pins and a screw together design. Smaller in size and removes play in T pins. Designed for printing without supports. Recommend Fine settings less than 0.1 layer heights for the threaded portions of…
This design requires a T-Pin which can be purchased on Amazon or at most craft stores. Simply print the file without support or adhesion, drop the pin into the base slot, insert the plug above that, then clip the handle on top to lock the…
This handle is designed to lock a T-pin into place to serve as a Weiss Distribution Technique tool. Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: No Supports: No Resolution: 0.16 Infill: 10 Filament: ? PLA Marble Notes: 2…
These are direct replacements for the Whirlpool WDT710PAYB6 Utensil Rack (part# WPW10671904). Save yourself $20. Printing Settings: Print these in a stronger filament like PETG, ABS, etc. Supports needed
Technically I design this from scratch, but I "borrowed" a lot of the design and wanted to use the same holder. So, a remix it is. I also added the step file for anyone who really wants to further modify it. I hated the printed thread,…
Inspired by Jon Gadget's video on the SwissCard where he commented that he didn't like how the knife spot was left empty while traveling. I too wanted to make use of this spot. I was going on a trip plane trip and recently picked up a…
UPDATE: It has been reported that some people are finding the original dimensions a tight fit, so I have reduced the overall length and width a little in V2. The WDT stand and Tamper holder dimensions remain the orginal size. A cover for…
Refined Portafilter WDT Tool Features 5 x 0.4mm prong tool for easy grind de-clumping and raking. Compact ergonomic handle, measuring just 15mm wide and 29mm long when assembled. Two-piece screw together design to make it easy to install…
Easy WDT Tool With other models I had some problems to find compatible needles. For this models this cheap needle fits: https://www.amazon.de/gp/product/B093RWZ78L/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1 Support: No Infill: 15%…
If you're reading this, you probably know what the Duomo distribution tool (or the Normcore equivalent). Both improve the distribution and workflow but they are pricey. I designed my own to be similar to the Duomo. I specifically made…
A funnel with a small lip that wraps around the edge of 58mm baskets to help prevent grounds from getting trapped between the funnel and the basket during aggressive WDT, and eventually ending up on your counter. The lip is small enough…
I love espresso. I love making espresso. But I hate needles! What is this thing? A WDT tool is used to stir freshly ground coffee. By distributing the powder evenly you reduce the chance of channelling and your espresso is always perfect…
Coffee Whisk (edit: WDT tool). Geek out on Coffee ;) Helps to even out lumps from grinding in the coffee powder before tampering. Uses acupuncture needles with size 0.35x50mm. They can be inserted from top and replaced easily if…
A needle distributor. Perfect coffee results thanks to the even distribution of the coffee powder in the portafilter. Designed for a 53mm portafilter.
Uses printer nozzle cleaning needles, they can be friction fit, you may need to pull through with some pliers. Print Stand Arm as shown in images with supports if needed
WDT espresso tool with magnetic stand. 3x2mm magnet for stand
A remix of nielsie645 's excellent replacement water reservoir cover with print-in-place hinged lid . This integrates the stand for jkim_makes ' popular WDT tool .
WDT or coffee rake in the shape of a coffee bean, because why not. Can fit up to 5 needles of various size, simply plugged in. Needles used are 3D printing nozzle cleaners from Ali Express The shape is surprisingly comfortable to hold.…
Remixed version of the screw for the "Espresso WDT Tool and Stand" by NathanJ7C. The bolt features a grip, making it easier to screw in and out without bending the needles. It is also slightly longer at the top to better clamp the upper…
I wanted to design a small WDT and tamper holder for my coffee setup. The WDT holder should fit the majority of WDT tools out there and the tamper slot is sized to 59mm. Printed on: Bambu X1 Carbon Layer Height: 0.2mm Infill: 15% for the…
This hanger was made to help better use vertical space in my cramped coffee corner. The tamper I designed around is the Normcore Coffee Tamper V4 and the included metal dish can be pressed into the recess, or popped out easily via the hex…
This is a remix of the "WDT Tool With Holder" design by FirstKlund to accommodate smaller needles. Both caps from the original design can be used.
I have a .4 mm nozzle, and .8 mm thick prongs. It is quite durable, not that good at distributing coffee, but better than nothing and it's easy to print. Inspired by this cool model:…
There are a quite a few well thought designs available to print your WDT for free, but half the fun is in modeling ;) I took a shot in this simple design with the goal to have a relatively quick, small and easy to print WDT tool together…
This stand is designed so a bottomless portafilter will rest flat easily on it (with the handle resting on the countertop or table), and have access to a WDT, leveller, and tamp close-by. The WDT ‘holster’ is for the design by jkim_makes…
I found it quite easy to bend the needles using the original stand. So, I designed a new one, hanging style. Make sure to turn up your model fan on the upper part, to avoid bad cooling. I printed with Bambu Labs P1P with some abs, but i…
I also sell these on Etsy here . A WDT tool that can hold up to 9 needles, I use these from amazon.ca Everything prints without supports, should be pretty easy to print and assemble. I printed the top peice with fuzzy skin to hide the seam.
The inexpensive WDT tool I purchased from Amazon * came with no base, but surprisingly had a threaded hole on the bottom so I could attach my own base. With some experimentation, I found that a M26x1.5 thread fit just right, so I printed…
You may ask: why not print a non-retractable WDT with an included stand instead? And that would be a good question. The answer is I printed the RetractaWDT first and while I like it quite a bit it kept falling over as I decided to store…
This is a 7 prong WDT tool that is meant to be made with needles that have 35mm handle and fall apart if cut. The handle of the needle will be contained in the bottom part completely leaving only 3-4mm of it sticking from the top where…
For a perfectly distributed and homogenized coffee bed you'll need a WDT-Tool. Just add two 6x3mm magnets while printing and stick the mount with double sided tape to the wall of your choice. I used five of these needles:…
This spirographic WDT is designed to be used with a 58mm portafilter basket. The design assumes the use of a few third-party parts, however, I'm still tweaking the design to accommodate these. V2 Updates: Requires m2 screws and hex nuts…
3D Printed Weber Moonraker WDT Tool Tested model, works good. Printed at 0.2mm Quality on Prusa MK3S with PLA 10% infill adaptive cubic. The STL's include two options for the base, one for porta filter ears, and one that indexes into the…
For assembly there are some M3 bolts in different lengths needed and I used 0.3mm nozzle cleaning needles. The holes for the bolts also need to be drilled to the right size and the needle sleeves have to be drilled for the needles you have.
Modified the WDT tool magnet clip to fit 5x3 magnets since I could not find any 5x2 or 5x4 in store near me.
Just a simple and stylish storage solution for the Normcore WDT Distribution Tool. I recently purchased this off of Amazon and was disappointed to find that a countertop holder was not included. This solves that problem. Printed with…
WDT is an art. Its chaotic nature takes skill to master consistently. Umikot is a Tagalog word which means: to spin; to turn around; to revolve; to rotate; to circle; to go around; to swirl; to gyrate. In that spirit, this 3D printable…
I love this model but using the handle sometimes ended up lifting the wdt off the portafilter. Remove the handle and add some grip to the spin part giving more control over it. This remix is for the 54mm portafilter. Update 5/30/23 added…
The original version of this model is excellent, but I wanted to make a slight change which would allow the outer face of the top section to be used for turning the assembly instead of a knob. The extra thickness should also increase the…
Alternative parts for Umikot - Planetary Gear Spirograph Espresso WDT Tool These are versions of the Handle and Spin Ring parts without the countersink. This allows the use of non-flathead/countersunk screws. enable support for the handle…
Alternative parts for Umikot - Planetary Gear Spirograph Espresso WDT Tool These are versions of the lug-flanged base files with cutouts for three lugs. This is for compatibility with the Breville Barista Max's portafilter. See the…
This is a crank driven manual (non electric) WDT tool. It helps get rid of clumps in your coffee basket and evenly distribute coffee before pulling a shot. 3D printing settings: My tool was printed with ABS+ @ 0.4 nozzle, .2 layer height.…
This is a remix of @muehles_822209 spirographic WDT Tool. This is for 54mm portafilters. NOTE: I just played around with the sizing of the original files to fit the 54mm portafilter. I have NOT TESTED THIS YET as I am still waiting on the…
