Portable WDT for Outin Nano Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This WDT is portable, fits nicely in the original case from Outin, and with 6 needles it's much better than the original
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 445
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This WDT is portable, fits nicely in the original case from Outin, and with 6 needles it's much easier to prepare your large puck (the 16 to 18g), with a sleeve to protect your fingers and the case from an unwanted accupuncture session.
Considering the height of the basket with 16-18g of coffee, I designed this WDT to fit 75 mm needles (I'm using 75 x 0.35 mm), to reach the bottom of the basket.
The needles can be acquired from Aliexpress: https://s.click.aliexpress.com/e/_okMMuoe
You can print in PLA, with 0.2mm layer height. I used 5 walls and 10% infill.
To assemble, first insert the needles in the middle part and screw it to the lid. The lid will hold the needles in position:
Then, close with the sleeve and you're good to store in your case, backpack, or keep your children safer.
PS: I also added a shorter sleeve if you want to cut 20mm of your needles. It will be more compact, more rigid, and still in a good height for this basket.
Notice that this is part of my home barista kit, fitting nicely under the support, for travels and office:
https://www.printables.com/model/1329664-home-barista-kit-for-outin-nano
