Portable WDT for Outin Nano Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This WDT is portable, fits nicely in the original case from Outin, and with 6 needles it's much better than the original
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 25
- Makes
- 0
- Views
- 445
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This WDT is portable, fits nicely in the original case from Outin, and with 6 needles it's much easier to prepare your large puck (the 16 to 18g), with a sleeve to protect your fingers and the case from an unwanted accupuncture session.
Considering the height of the basket with 16-18g of coffee, I designed this WDT to fit 75 mm needles (I'm using 75 x 0.35 mm), to reach the bottom of the basket.
The needles can be acquired from Aliexpress: https://s.click.aliexpress.com/e/_okMMuoe
You can print in PLA, with 0.2mm layer height. I used 5 walls and 10% infill.
To assemble, first insert the needles in the middle part and screw it to the lid. The lid will hold the needles in position:
Then, close with the sleeve and you're good to store in your case, backpack, or keep your children safer.
PS: I also added a shorter sleeve if you want to cut 20mm of your needles. It will be more compact, more rigid, and still in a good height for this basket.
Notice that this is part of my home barista kit, fitting nicely under the support, for travels and office:
https://www.printables.com/model/1329664-home-barista-kit-for-outin-nano
