Counting matching models…
It's spring ! Time to sprout plants for your garden ! This small press allows you make compostable pots out of cardboard in which you can sprout your seeds. Once enough grown, simply plant the whole thing in your garden. No more plastic,…
OutIn Nano espresso machine filter baskets unlimited stackable carrier.
Folding stand for Outin Nano. Skládací stojan pro Outin Nano.
Revised to allow printing without overhang and minor geometry changes.
This is a remix of the Z axis belt covers from TeamFDM. I love Akio's belt covers, as the access underneath lets me route my webcam cable under the covers, but they are too tall to fit under the Z axis linear bearings. My remix version…
A simple hook that can be screwed into your desk to help manage cables. I liked the shape of https://www.printables.com/model/217285-under-desk-cable-management-hook, but that one is a little chonky and way, way larger than I needed. This…
Easy to print Print instructions Rafts: Not needed Supports: Not needed
Thias is a more stable / durable Remix of Brad Bakers very useful original design: https://www.printables.com/model/1244644-kobra-3-max-poop-chutedeflector/files So this remix also needs a bit longer M3 screws. PETG is recomended instead…
Français : J'ai créé cette totoche (jargon de scoutisme - corne de brume) pour permettre à chacun de faire la sienne soi-même, et pour avoir un style différent de la corne d'animal. Elle produit un son similaire aux modèles standards en…
I made this planner for the morning routines of my kids. One (8yo) of them needs no help whatsoever in getting ready for school but the other (6yo) cannot focus when time is short. This helps a great deal and makes it easy and fun for her…
Why I made this I made this controller + headset holder for a friend (that's why I don't have a picture). he wanted something like the holder from "3l3m3nt"(I can't find him at thingiverse anymore. he probably deleted that design). But…
Sylvester the cat pouting Another Sylvester artwork: https://www.printables.com/model/320112-sylvester-the-cat Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your…
Stand for Outin Nano for prepare coffe in your self coffe mug. Stojan pre prípravu kávy z vášho Outin Nano.
BOM: Printed with ROSA3D High Speed PLA Dark Blue Scaling up our popular cable and tube clips! This heavy-duty set of snap-fit pipe brackets is designed for much larger routing tasks. They perfectly accommodate standard PVC plumbing,…
Built in Onshape: https://cad.onshape.com/documents/0a23a3bafdbb1c9219c1536b/w/f8af3cbc7d856e8ea7dc0534/e/3c7af306953b55b3ec0ba495?renderMode=0&uiState=63448cb62e6ab355012f1c2e The parts: A “loose clip” - Useful for extra-large cables or…
A two-piece lid for wide mouth mason jars to be used for sprouting seeds. If you are new to sprouting, there are plenty of instructional videos on YouTube . They are extremely easy and fast to grow yourself. I have found that these lids…
This is my interpretation in Gauge 1 of the NS Zuurpottenwagen 520704 - N.V. Koninklijke Nederlandsche Zoutindustrie Boekelo. Before suitable corrosion resistant metal alloys were available to build tank cars, acids and…
These jigs are for routing your own MFT table with benchdog holes of size 20mm. The first jig is used to establish a corner. The CC distance to the first holes from the corner is 70mm which is equal to the MFT/3. You will only need to use…
This is a simple print for sprouting lids on a mason jar. I have included wide mouth and standard mouth lids. To print these successfully you have to set the top and bottom layers to zero. I have included the gcodes for PETG. I choose 40%…
Print your own new World Scouting logo woggle. No supports, color change for last 5 layers (0,2mm layer).
Two base versions for standard or plus edition. You can print two versions of legs, 12cm or 15cm between top and bottom (12cm legs are in photo example). Printing instructions: print base and top wider side facing down print two legs,…
For easy fill filter basket (6-8g) with coffee and easy tamper. Easy print without supports. Tamper model: https://www.printables.com/model/1125541-outin-nano-coffee-tamper-356mm
Great for polishing 3d print with brass/copper/bronze and other metal-filled filaments (and rocks of course !) Remix from : https://www.thingiverse.com/thing:2744886 Almost fully redraw with the aim to make the structure with a CNC router…
Parts: Water reservoir Sprouting tray Weighing plate Lid Divider I'd recommend to use PETG for at least the reservoir to make it watertight. For slicing the sprouting tray you have to use PrusaSlicer, because the grid at the bottom is…
This is just a plate which can be fitted to the original clamp and used with your VKB devices. Tested on NXT Gladiator with and without Omni stick. The plate has groves of 1.5mm which you can use to attach to the clamp using few cable…
This is a remix of the “Christian Louboutin So Kate 120 High Heel Pump woman shoe” make STL from https://www.thingiverse.com/make:523890 by VDrostock , and the “Chef's Knife” STL. I decided to limit myself to STL editing in PrusaSlicer…
needed something to keep the wires in the corner. and stop them from wiggling between desk and wall. needs 2 x m4 w/nut 1 x m3 w/nut
I wanted to use Akio's excellent mod of Z-belt covers for Voron v2 to route the USB cable from the webcam, but I discovered that due to increased thickness of the cover it didn't fit under my Z-rail, which was positioned, in accordance to…
This is my design of a cable organizer or cable routing hook. It should provide enough space for many power cords and/or network cables. You will find object files for a wide range of heights and depths. Orientation-wise it is made to be…
Vladimir Vladimirovitch Poutine — Buste 🇫🇷 Français Ce buste de Vladimir Vladimirovitch Poutine représente une figure centrale de la scène politique contemporaine, inspiré de la photo la plus populaire du personnage afin de capturer avec…
Finally printed the BentoBox recirculating airfilter and made some changes to it and some nice cable management inside the P1S for 12V. I use the filter mainly when printing ABS/ASA to avoid VOCs and that nasty white deposit that…
Refer to origin of this remix: https://github.com/tanaes/whopping_Voron_mods/tree/main/Z_belt_cable_cover The difference is that this version fits narrower 2020 extrusion T-slots (original didn't fit mine - they were intended for a bit…
another Outin Nano adapter for coffee cups
Print without supports, 20% infill. Funnel model: https://www.printables.com/model/1125784-outin-nano-funnel
Since the WECK is a traditional German company that sells its products mainly in German-speaking countries, I hope you don't mind that the following instructions are written in German. Da die üblicherweise für die Sprossenzucht…
The flange fits the base of the machine, and the adapter can be used in either orientation: flange up provides a completely flat bottom and makes a sturdy storage stand, and flange down prevents the adapter from sliding off the coffee…
It’s just that – a stand. But not just any other stand. It’s a stand created by a seasoned specialty coffee barista who wants to get the most out of his shot of espresso! This stand does exactly that. It lets you level up your Outin Nano…
Fits most of european jars usually used for pickles or honey. The smaller one is from Lidl. Can fit a little tight and on some jars - doesn't follow the thread exactly, but it pops right on and do it's job. :-) Printed out in PET. It has…
I wanted a spacer between the spool holder and printer for my Bambu Lab X1 Carbon as their stock configuration makes things a bit tight. I found a model for that but also noticed a model for routing the PTFE tube from the AMS hub. I…
Router guide you for use with the flex shaft (and clones). One normal version and one with a flat side so you can squeeze it into awkward spaces. I use it for putting notched holes in Bud Enclosures with a flush trim bit. Don't try to use…
I needed a stand for an OutIn Nano, but all existing designs weren't suitable. This one disassembles to flat pieces. Print two of the legs with some supports.
Sprouting Jar Lid TWIST 82 Category: Kitchen & Dining
My wife asked me to find a print her a new woggle. I couldn't find her one so made it myself in Fusion and I think it's good enough to share with you lovely internet people. It's my first design I'm happy enough with to share with the…
Available for purchase on my Etsy store. Hook tool for gathering shift and brake housings when dealing with Trek's Control Freak internal cable routing. Very likely useful on other brands' internal routing as well. Push all the housing…
ll the stands that I found were either too weak, unstable or too large to fit in my original case. Then I designed a slim but strong and stable model that I will still be able to close the case with my Outin Nano inside, plus all the…
Here are some models for making a work surface compatible with the Festool MFT. No support needed when printing. What you need: Copying ring D27mm Groove cutter D15mm There are 3 models: Corner jig Jig Use lever clamps like Festool FS-HZ…
What makes the best Outin Nano cup adapter even better? LEGS! These legs take the original Outin Nano cup adapter to new heights with a compact, stackable design that's made to fit perfectly in three corners, allowing all size and shape…
Stand for OutIn Nano portable coffee machine
Inspired by the Traxxas CLIPLESS BODY MOUNTING on the Rustler VXL, I've made this one for the e-revo VXL 1/16. I used two screws M3x0.5 6mm (recycled on a old revo 3.3, sold with this part TRX5228) Works perfectly
A little push Block 22mm large the photo was an early print and this prototype was a little small, so I modified it for you guys with big hands Print Settings Printer Brand: MK3 Printer: Prusa i3 Rafts: No Supports: Yes Resolution: 200…
Voron v2.4R2 Z Belt Cover with wire routing. A multi color remix of Akio's version.
A simple Wall Hole Starlink Cable Routing Grommet I created. Very useful to install UTP cables through the wall. Available in two versions, one for 20mm hole and the other for 18mm hole. You need to print it with a flexible material, 3 or…
Used TPU so solve the problem of not enough grommets that came with a new frame. This could potentially work for other frames if it is scaled up or down in the slicer.
I printed this model using a .08 tip sliced with cura and it uses approximately 140g, run time about 6 hrs. It is designed to hold the drip water after rinsing the seeds so placing it anywhere in the kitchen will not cause a mess. Holds 1…
I saw an advertisement for a fancy box to put green onions in to sprouting them. It was a neat idea, but WAY too big for my needs. It also cost enough to make the return on investment about 25 years. This is an easy print, but the inside…
I wanted to share a remix specifically designed for the Outin Nano Espresso Maker. It was printed without supports using PLA in Army Green, PETG Black for the clips, and TPU for the seal. I also used foam inserts from the original…
One Brake line routing for the bottom and one for the top fork.
It's spring ! Time to sprout plants for your garden ! This small press allows you make compostable pots out of cardboard in which you can sprout your seeds. Once enough grown, simply plant the whole thing in your garden. No more plastic,…
10.16.25 Strengthened the hinge connector in v2. ***** This is a USB cable mount designed to fit on the cable chain to route the beacon's USB cable along the side or top. I designed it with hinges for after the Beacon install so you don't…
A simple stand to hold a quart size mason jar inverted for seed sprouting. Update: v2 version added I updated the design to make it support-free and more stable. Slightly improved profile. Hardware: I used these stainless steel mesh lids…
Woggles for Beavers troop while they were waiting on new supply of woggles to come in. 2mm inner brim added to add stability.
Hi, Finally something I can contribute! Maybe someone recognises the following situation: You want to play you favorite PS5 but the TV is occupied by our significant other. Luckily you have a nice PC monitor on an arm that you can hookup…
This is a routing base/shroud for the Parkside PFBS 12 B4 rotary tool. For the print I used variable layer height - around 0.2 mm for the lower parts, 0.1 mm for the threaded part. I also blocked supports for the thread area. The router…
If you are installing a dropper post with internal cable routing on your Scott Genius 740 bike you'll need this cover. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Resolution: 0.2 Infill: 30% Filament: eSun…
Several compact variations on simple cable routing hooks. Can be installed on walls, desks, and workspaces. The hooks can be installed using a single (Self-Tapping) M2 screw (6-8mm length recommended). If you need a slightly larger hook,…
Pickup cavity routing templates for various type of pickup. Check the dimensions work with your pickups. I tend to use a Ø3/8 Router bit for cavities. Use your favourite method to attach the template, I currently prefer double sided PVC…
Simple template for routing cavities for humbucker pickups in a guitar body. Print with extra sidewalls to reinforce the area where the bearing will set against.
I did a similar design for my Xiaomi watch s1. A customer asked for the exact same design for his Apple Watch. You can insert your wrist band on the bottom and route the cable along the back of the stand. you could go with small support…
This is a PTFE tube router for the MK3 / S / + and MK4, that allows you to use a dry box or a separate spool holder on your desk. It spits out the filament pretty much where it would come out of a spool mounted on the stock filament…
Water spouting frog : https://drive.google.com/file/d/1EwWdHxvZjmnDGIcFG_wjHauetFlx5DhG/view?usp=sharing powered by a solar pump. (only at full sunlight) The frog is attached to the swimmingplatform at the edge of the pool. Print…
This a routing template for the 3 top routes required for a Floyd Rose Tremolo. There is a holder and 3 inserts. Printed in PLA with extra walls for strength. Align the holder and mount on the top of the guitar body that you want to route…
A 3-part snapfit sprouting jar stand that holds the sprout jar at an optimal 30° angle. Lightweight and Ideal for proper drainage of sprouts. Easy to clean.
Slot Routing Jig for Makita Router
Design is print in place and is working with all lenghts of översidan
This is a simple modification to the original model that introduces some feet that come off the face of the jar lid. I would recommend using supports PLA worked fine for me but the original author recommend PETG I have included three…
The Happy Cable Ender 3 electronics Case This case is the result of me being too picky about the internal cable routing in the ender 3 electronics case. As a result of having organised cables, it allows for amazing airflow, so that the…
Modified folding stand for Outin Nano. Upravený skládací stojan pro Outin Nano.
If your X + hotend cable flows pretty well and you don't see a need for a cable chain, but just need the cable to route downward instead of outward to save on space or prevent interference, you can use this clip. Tested on Neptune 4 Plus.…
Travel box for OutIn nano standard or plus edition with additional storage. Stand can be used, but whole box needs to be raised a little. Basket or capsule attachment is stored in a cup, extra storage can be used for scales, needle…
This remix simply builds upon the modifications made by Daniel Falkowski to add a cable routing channel for the relocated Y Endstop to have a neater appearance while retaining all of the other features of the PG7 + Spring Steel Voron…
Print List: Planter_Base ---------------------Print: 1 Planter_Cells ---------------------Print: 1 Planter_Roof ---------------------Print: 1 Planter_Wall '---------------------Print: 4 Planter_Clip_Vertical '-----------Print: 8…
A minimalist tablet stand with an integrated shelf to put your stylus. It is designed for everyday desk use and media viewing. The angled design provides good stability while keeping a clean and simple look. The model is optimized for…
EDIT: A note to say I've been using this extensively instead of the included bases and I'm routing basically dust free with much better stability. Tape over the round dust port milwuakee provides to improve the dust extraction. For any…
After some trial and error I found that the Hidden cable routing z belt cover mod by Aiko worked the best for me of the Z belt covers available. However, there were a couple things I decided to tweak. Same as Aiko there are A and B…
A replacement for the original grommet that protect the break and shifter hoses from wear when routing it through the bike frame. When I rebuilt my bike I couldn't find the original parts anywhere for purchase, so I decided to design my…
Draining holder for 2 sprouting jars. Holds 2-80mm dia jars. Maximum dimension of the print is 200mm, but it could easily be scaled up for larger jars if your printer supports it (mine doesn't). Enjoy!
Created ends (Black ASA) to tidy up hardware purchased speed bump/cable protectors that we use as physical marker to fit car just inside of garage so that door can close. Bolt Heads 17mm diameter max Bolt Hole 8.2mm Diameter Created model…
Printed in PETG at 30% infill. Supports required for one half - organic supports worked well and removed easily. May need to drill out bottom holes to make slightly larger, though have since modified the design to add some more space.…
I don't like the original cable routing on the model by IBI because the cables can move and break on the connector after some time, so I made this. This part has three functions: Make the connection between base plate and V2S more rigid…
¿Tienes una cafetera portátil Outin y te encanta llevarla contigo allá donde vayas? Este soporte 3D ha sido diseñado especialmente para ti: ligero, funcional y plegable , ideal para los amantes del café que valoran tanto la practicidad…
Print without supports It helps immensely to remove the bars in front of the fans for better air flow. See photos.
I needed some rounded corners for a furniture project, so I quickly designed these to use with a handheld router and a flush trim bit. Provided are the sizes 25, 50, 75 mm, others could be customized (if you have solidworks). The models…
Remix with a wire routing port for stepper motor wire.
Printed with 10% filling. The photo of printed model is in tricolor PLA blue green orange. No need supports.
Cable routing on the extruder side of the a1 and a1 mini. Prevents the cable from kinking. layer height = 0,15 / nozzle = 0,4 / without supporting structures
I've been using this simple cable clip for a while and it's served me well. I use some doublestick tape to hold it down on my desk and it can comfortably hold most small cables like phone chargers, mouse wires, and other things. You can…
Here is a simple stand for the new Outin Mino espresso machine. You need 3 M4x20mm screws, 1 base and 3 legs. For transportation the stand can be inverted and secured with a rubberband to the Mino as shown in the picture.
A small desk tracker which provides a tactile, satisfying and motivating way of keeping up with new habits/chores. The "Alphabet.stl" file contains sliders of each letter. I myself have set my tracker up with SCEG which corresponds to…
Heart shaped routing templates to fit the routing frame I made previously. ( https://www.thingiverse.com/thing:3513531 ) PLA is fine to use if you only plan on using the templates a few times. If however, you plan on using a template…
