Gaggia Classic/Pro Tamper and WDT Magnetic Hanger
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a hanger meant to hold a Normcore 58.5mm tamper and a WDT tool on the side of a Gaggia Classic/Pro.
- Ocena
- 5 / 5
- Polubienia
- 62
- Pobrania
- 280
- Wydruki
- 3
- Wyświetlenia
- 2431
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
This hanger was made to help better use vertical space in my cramped coffee corner. The tamper I designed around is the Normcore Coffee Tamper V4 and the included metal dish can be pressed into the recess, or popped out easily via the hex cutout.
I use this printable WDT from FirstKlund and the hanger is designed for it, but it could also accommodate other DIY cork options.
If you wish to make alterations to fit your specific tools, there is an included STEP file.
Additionally, a shoutout to Loogle for making this excellent Gaggia Classic housing model that helped me make this mod with much more ease.
There are recesses on the back for either 5mm x 2mm disc magnets or 10mm x 3mm disc magnets to keep the holder from sliding around too easily. There is also an optional WDT cover that can be glued into a slot on the underside if you want to make sure you don't acupuncture yourself early in the morning when you aren't fully awake yet.
The main hanger is designed to be printed with its back on the build plate. PETG is recommended to ensure no nasty degrading over time due to getting warm. The settings I used are below:
- Infill: 20%
- Layer Height: .2mm
- Supports: None
Stringing may occur on the hex holes, but a lighter and stiff bristle brush can take care of that if you don't feel like tuning your retraction settings.
Update 2/8/2023: Modified WDT cover to have a softer, rounded bottom edge to prevent scraping your hand if you bump into it.