1 / 3
Espresso WDT and 58.5mm Tamper Holder — zdjęcie 1
1 / 3

Espresso WDT and 58.5mm Tamper Holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

WDT and 58.5mm Tamper/Distribution Stand

Ocena
0 / 5
Polubienia
5
Pobrania
33
Wydruki
0
Wyświetlenia
614
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution — Noncommercial

I wanted to design a small WDT and tamper holder for my coffee setup. The WDT holder should fit the majority of WDT tools out there and the tamper slot is sized to 59mm.

Printed on: Bambu X1 Carbon

Layer Height: 0.2mm

Infill: 15% for the top and 35% at the bottom (if you want a heavier stand)

Material: PLA

Supports: Painted supports for the large overhang on the WDT stand. You can try without supports, but you might have to cut way any parts that sag. 

Option:

  • I cut out a 6mm thick piece of cork to soften the part under the tamper. 

Tagi