1 / 3
Espresso WDT and 58.5mm Tamper Holder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
WDT and 58.5mm Tamper/Distribution Stand
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 33
- Makes
- 0
- Views
- 614
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
I wanted to design a small WDT and tamper holder for my coffee setup. The WDT holder should fit the majority of WDT tools out there and the tamper slot is sized to 59mm.
Printed on: Bambu X1 Carbon
Layer Height: 0.2mm
Infill: 15% for the top and 35% at the bottom (if you want a heavier stand)
Material: PLA
Supports: Painted supports for the large overhang on the WDT stand. You can try without supports, but you might have to cut way any parts that sag.
Option:
- I cut out a 6mm thick piece of cork to soften the part under the tamper.