620 models
Simple base for the portafilter to have a fixed position for tamping your coffee. It fits specially for the Sage / Breville barista express portafilter with a basket size of 56 mm. The top opening has a size of 61.3 mm.
Print approx. €2.92–€3.57 excl. taxPreliminary estimate for one variant
The holder can take the portafilters for one or two cups and holds both in a vertical position. I printed in PETG, but other materials like PLA should also work. No special print settings (like supports) are required.
Print approx. €4.69–€5.73 excl. taxPreliminary estimate for PETGSource material: PET
Was looking for a rugged case that can be versatile depending on the situation I needed it for but I didn't want to print multiple styles of cases. Found a few that I liked but none of them were perfect for me. So I put what I needed into…
Print approx. €0.99–€1.21 excl. taxPreliminary estimate for one variant
Printed on a Creality Ender 3 Neo with 100% infill, without supports and standard PLA.
Print approx. €3.45–€4.21 excl. taxPreliminary estimate for one variant
Siehe Orig.
Print approx. €4.27–€5.22 excl. taxPreliminary estimate for one variant
Ergonomic coffee tamper for espresso machine 50mm base & knob diameter. Fits perfectly in hand made for 50mm brewers
Print approx. €2.22–€2.71 excl. taxPreliminary estimate for one variant
If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker You will need six M3x30mm socket head fasteners for the main…
Transforms freshly ground coffee into a mini zen garden. I have made several sizes available: Ø 59, 57, 53, 51, and 49 mm. A simple and thoughtful gift for coffee lovers. If you’d like to support my work, leaving a ♡ like ♥ or even buying…
Please report a portafilter or other equipment that is not fitting, plus its dimensions. The tamper station features: holding the portafilter for preparing the puck (adjustable via vertical screw) storing two bigger 51-54 mm or 58 mm…
I made this tamper because my original 52 mm tamper was a little bit too large for my bottomless portafilter. Since the portafilter is slightly conical, the 52 mm tamper stuck at the very beginning and can't reach the grinded coffee at…
After a few interations this model did well during testing. Especially when using only one hand for tampering, the portafilter is not stable when pressing down, so a solution must be found. For my portafilter the fit is quite snug. If you…
I wanted a small, portable funnel I could throw in a little bag with my PAX 3. I went through many iterations and landed on this. There are two versions: Regular and Magnets Just print as-oriented without supports. I recommend printing…
A tamper evident, one-time use lock. Once locked, it has to be destroyed, which is evidently visible. I remixed this model so the overhangs print better and tweaked some tolerances.
Printed with tamper side to the build plate with supports.
A cheap and easy solution to create fire proof, long lasting recovery phrases for your crypto wallet . Inspired by the Blockmit-Jig. But with a clamp that prevents the washers from moving around while stamping. I designed it in a way that…
I present the spring loaded Coffee/Espresso tamper gadget: easily compact your coffee grind with your own assembled tamper apparatus to make your espresso with style! Available for 49 - 58 mm portafilters. The handle, spring holder and…
A cheap and easy solution to create fire proof, long lasting recovery phrases for your crypto wallet . Inspired by the Blockmit-Jig. But with a clamp that prevents the washers from moving around while stamping. I designed it in a way that…
A game accurate model of the Spatana stamper from Splatoon, complete with a simplified mini version for use with the Splatoon Figma model, and an alternate TPU belt that transforms it into an actual (somewhat) working stamp. This entire…
Special Tamper Station with extra wide Tamper foot for good use. Special designed for a friend which has a Rocket Coffee machine with a E61 tamper. To get a better consistent coffee press, he looked for a tamper station. Because the price…
The Dedica is a neat little espresso machine with a small footprint, perfect for small kitchens. But with all the parts required at armslength for making a good coffee, like portafilter and tamper, etc., your morning workplace quickly…
The fourth thing in my Week of Things, some useful, some just for fun. Thought this would force me to post some of my projects. Most are semi useful/functional and some are purely inspirational. After getting a Gaggia Classic espresso…
Espresso tamper - what else to say? Of course it is not as fancy as steel one but you can't print steel, right? According to my tests this works just as well and you can cheapy and easily test different tamper styles - flat/ripple/curved…
This tamper guide makes your ground coffee flat, so earth can stay round! It is a really tight fit on the tamper, so no screws needed. Print it on PLA or PETG. No support needed! (The inside of the model ends in a cone, so you can print…
This is a tamper station inspired by Joe for my Sage/Breville Barista Express machine, which uses a 54mm portafilter. There are two sized a big and a small one.
This is the perfect coffee / espresso tamper in 4 different sizes: 57mm (Ascaso), 57,35mm (Lelit), 58mm (most of the other brands with 58mm grouphead) and 58,55mm (Lelit). I'm using the 57mm version with my Lelit PL41TEM and the Ascaso…
A fast printed accessory for the Delonghi Dedica. It uses the ledge on the top and a hole present below. The main purpose is to hold the original measuring spoon/tamper but it can hold the "filter-holder" (?) too. Only 4g of material are…
Changed the other end of the Herb Tool's shovel to a tamper that measures 12.5mm OD and is designed to fit the Venty vaporizer from S&B, but will fit a variety of other ones as well. Don't use on warm items. I printed in [dried] PETG with…
This is a stand to support the filter handle for a SMEG Expresso maker rather than just sitting the handle itself on the table surface when tamping down the coffee puck. The SMEG uses 51mm basket and the filter handle body is approx 60mm…
Quite fast to print, took me ~13 mins with the MK3S. Printed with PETG & PLA for comparison, works well in both variants.
The 18650 battery case/holder. Battery contacts are made from the nickel strap 8x40mm. The stamper is used to form the good battery contacts. I recommend to pre-solder straps with the usage of Ni soldering liquid for the easy wiring. Lets…
Coffee Tamper for 51mm Basket Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.2 Infill: 25-100% Filament: Devil's Design PLA PC Gray Notes: Wall Line Width: 0.4 Wall Line Count: 4 Category:…
Simple espresso tamper 58mm in diameter.
For making Espresso it's essential to tamper the grounded coffee with the right pressure. This tamping station helps you to improve your results as it makes it easier to apply pressure consistently. The diameter fits portafilter with a…
Distributor and Cone shaped tamper for the excellent Flair Pro 2 Espresso maker. I found that my Flair Pro 2 tend to start dripping from the outside first then to the middle during pre-infusion. So I made the distributor to help me even…
51mm Tamper (resize to your portafilter) and knock box. The bottom of the knock box has an inset to add a piece of rubber cushioning so its not as loud when knocking your grounds out. This set was made to be used in tandem with my Ball…
PLA ~15% infill
This hanger was made to help better use vertical space in my cramped coffee corner. The tamper I designed around is the Normcore Coffee Tamper V4 and the included metal dish can be pressed into the recess, or popped out easily via the hex…
A simple coffee tamper with a 6.2 cm diameter. It's made hollow to add extra weight, since tampers are metallic. I filled mine with metal BBs, but sand will work too. The print is divided into two parts that screw together. I use this…
Upgraded my funnel design so that it fits over the top of the portafilter with a 51.5mm opening so you can leave it on and use the 51mm tamper without taking off the funnel. This should help reduce any kind of mess from grounds falling…
Holds your tamper in a convenient position Category: Kitchen & Dining
Tamper Station Gaggia Classic
Thingiverse Customizer: https://www.thingiverse.com/apps/customizer/run?thing_id=3253961 Very basic tamper station. Doesn't need a lot of material to be robust. I made two slightly different versions for the portafilters of a Quickmill…
Give the Gift of Coffee by Making a Donation :) Coffee Aligner: The Story of Creation Origin of the Idea The idea for the Coffee Aligner came from the difficulties faced when aligning coffee beans for espresso making. Espresso cannot be…
After creating a hexagon-style drip-platform for the Delonghi EC685 (to published yet), a hexagon-style tamping station must be created. For my portafilter the fit is quite snug. If you want a more snug/loose fit, or your portafilter has…
Compact solution to store and use portafilter, leveler and tamper.
espresso portafilter 51mm needs a tamper, mixer & distributor, so here you can find all of them beside the base for them
After the third time I misplaced the tamper for my single injector handheld Bugler Filter Cigarette Making Machine, I decided to model and print a copy. For years I'd been rolling a pack at a time with my Premier Supermattic machine. A…
Small indent on bottom face for adhesive feet. Should print fine if you're printer can handle overhangs
Espresso Coffee tamper. Includes: handle, tamper 51,52, 53 and 54 mm interchangeable and lock pin Use a Prusa Idler spring inside and lock the handle to the desired tamper dimension PS. feel free to ask for more dimensions for the tamper…
V2: Add filet to the edge of slot, which makes sliding portafilter handle into the slot easier. Stable while tamping, and fit with short tab version of “ Umikot (58mm Version) - Planetary Gear Spirograph Espresso WDT Tool” Printed with…
25/02/2026 - It's been 4 years, but I've finally removed the rogue part from the underside of the model and updated the page. Apologies to anyone affected. Upgraded version of my original water reservoir cover for the Gaggia Classic Pro .…
There are holes for two optional magnets (6mmx2.7mm). Supports are required. I recommend normal supports (not organic) for the model. See picture with recommended orientation (the long hook that holding the holder on machine should not be…
A self leveling tamping station designed for the 49mm basket of a pre-millenium (generation 2) La Pavoni Lever Espresso machine. The basket sits flat in the base and the funnel screws on top. The funnel was designed with a straight…
Based on AliExpress Tamper Station: https://www.aliexpress.com/item/1005004327712555.html It all based on my Breville BES840BSS machine and Bravo Tamper and Distribution tool by Gilberto It has a 3mf file compatible with Prusa Sclicer…
This coffee tamper station is designed for Delonghi EC685 with original portafilter or 51mm bottomless portafilter. It is great for filling ground coffee and tampering in making your espresso.
I made this for my own 51mm portafilter. No compatibility guarantee. Optionally you can use the Seam Painting feature to place the seam on the inner side, with Aligned seam option.
For making Espresso it's essential to tamper the grounded coffee with the right pressure. This tamping station helps you to improve your results as it makes it easier to apply pressure consistently. The funnel prevents you from spilling…
The Delonghi Icona Vintage Eco311 has no possibility to store the supplied filters for 2 cups and pads and the piston has to stay in the machine. The coffee powder is better pressed with a loose tamper, which benefits the taste. Place the…
Saw the original model and i liked the whole thing so i scaled it down and also added another version that includes cilinders inside the design to save on filament. My coffee setup Casa Brews 3700 Essential Bottomless and spouted…
This custom-designed Tamper Station is the perfect companion for the Umikot 58mm planetary gear espresso tool ( Umikot on Printables ). It offers dedicated slots for: Dosing ring/funnel Tamper Distributor/Leveler Puck screen Bottomless…
I don't know if all machines are standardized measure it this one is for diameter 51mm 58mm
A few accessories that will make your coffee corner look nicer.
This is a new version of a tamper station for my Sage/Breville Barista Express machine, which uses a 54mm portafilter.
The simple coffee tamper with unscrew handle. Default size is 51mm, but I'm sharing also file for fusion360, so you can change size to the other. Materials: base - choose best one for contact with food. My choice is black PLA. handle -…
Espresso Tamper for 51mm portafilter. Diameter is 50mm printer with 30% infill for strength on PLA 0.2mm Printed on Ender 3 S1 Pro
This saves time preparing a 7 grams filter on a 58mm portafilter. Coffee is funneled into the center of the filter and a guide lines up your 41mm tamper straight into the coffee. I just tap the entire portafilter to settle the coffee…
This is a self-levelling tamper. Ensures your tamp is level every time for more consistent, higher quality shots, reduces channelling, and the palm tamp design ensures superior ergonomics, lowers chances of wrist injury and allows you to…
Print with any material you like, print orientation like you can see on the third photo, stick to wall with strong double sided tape, but first thoroughly degrease the surface, to make it holds better. That reminds me it's time for…
I bought a Bosch Tassimo machine and was disappointed that the pods are re-usable. So, I bought re-usable ones from Amazon with a container and rubber lid. However, to make a good cup of coffee, a tamper is required to push down the…
I have an old Saeco, Aroma, espresso machine. It works fine, and I like the coffee it makes. While surfing Thingiverse files, I saw several espresso funnels and tampers. Many of these were for DeLonghi machines. I figured it was time to…
I bought a Flair Classic , and while I love the coffee I'm getting from it, the "tamper" (i.e. dosing cup) it came with was pretty bad. I didn't particularly like the look of their $25 "pro" tamper so I decided to design my own. This was…
As result of a community request I redesign my Tamper Station Rocket E61 to RANCILIO Espresso machine. Changes are: Height of the stay not so deep. => to 28,1 mm (instead of 37.2 mm) Lateral intake change a little bit for better fit. =>…
I recommend to print it with at least 3-4 outer layers and at least 8 top/bottom layers with 0.1 mm layer height. Recommended material is PETG, since it's the most food safe FDM material out there. Thick walls are required to ensure the…
Tamper de 51 mm. Diseñado en Fusion 360. Relleno: 20% Altura de capa: 0.02 Material: PLA
Tamper for any Bialetti or other Moka to press the beans. Size of the pressing surface is adjustable in the SLT file according to the needs (x and y dimension). The original one is designed for a one-espresso moka, so pretty small.…
From original model: "The Orginal Sage Barista Pro Tamper is too small. Channeling problem! With the adapter no problem anymore. The first line is not a layer shift but these 5.5mm lines for tamper depth." My version adds a ripple pattern…
After our last few posts, we were asked multiple times about fail safes. We've listened and want to give our emergency key design away for free. I am proud to describe it as tamper evident and reusable, something I have not seen in an…
A robust stand for a 58mm portafilter that prevents dripping water from reaching the countertop, and where the clip on plastic parts on modern portafilters, designed to heat up faster, don’t break off when tamping. Dimensions and initial…
A remix of nielsie645 's excellent replacement water reservoir cover with print-in-place hinged lid . This integrates the stand for jkim_makes ' popular WDT tool .
A simple tamperstation for Ascaso steel portafilter. Works well with the classic portafilter and the bottomless one. Printed with SUNLU Black PLA and Polyterra Blue PLA Added the code for the speed profile. Perimeters 3 Infill 25 %…
Ninja advises that you should flatten any leftover ice cream in the cup before refreezing so as not damage the blades when putting it back into the machine. This is designed to fit the cups of the Ninja Creamy NC300 with a width of 9 cm.…
Espresso Tamper for De'Longhi DEDICA EC 685
Changed the original to have a looser fit so that the tamper can be lifted more before catching on the holder. I also added slots for magnets and anti-slip silicone bumpers/feet. The anti-slip domes are necessary for the holder to stay in…
Tamperproof Seal. Simple and Fast to print.
Throw away that poopy garbage tamper your de' longhi or other 51mm espresso machine came with and you this bad boi instead Category: Kitchen & Dining
A 70mm coffe tamper for the De'Longhi Dedica Style original portafilter. The original one isn't exactly elegant or convenient, and breaks easily. Printed with 6 perimeters and 30% gyroid infill.
simple designed holder for the espresso e61 espresso portafilter for single dosing. It sits stable on the outer ring. Screw on box on the buttom to be filled with weights. Just dont print it like I did in white… we are still dealing with…
A funnel which fit perfecty the Bialetti "La Mokina" 1/2 Cup italian coffee maker. The tamper is just here to tap a little bit the coffee :)
Another Coffee Tamper for coffee lovers and hobbyists, made by one. It was made according to the dimensions of the Sanremo filter holder that uses a 58mm tamper. I'm more than happy to make a variation for a bigger or smaller filter…
This is the first version of a combined tamper, manometer and funnel station for the Flair Pro 2 Espresso Lever Machine. Print Settings Printer Brand: Creality Printer: Ender 3 V2 Rafts: No Supports: No Resolution: Nozzle: 0.40 Layers:…
Ich wollte eine Tamperstation, die zum einen schlank ist und in meine Küche passt und zum anderen alles unterbringen kann, was man so braucht. Zudem sollte sie Umikot kompatibel sein. So entstand die All-In-One Tamperstation. Die Station…
The Normcore Palm Tamper Mod ________________________________________________________________________________________________________________ This model is for those who like their Normcore V4 tamper, but would like to make it more…
Yet another Coffee tamper for 52mm filter baskets. Tamper has a 51mm diameter. Works well with the old Delonghi coffee machine I have (that only came with a fixed integrated tamper) Recommend using a “concentric” top/bottom layer pattern…
Bring some prehistoric fun to your sensory bin! This TOM t Lizard Stamper is designed specifically for sensory play acti
upgraded tamper for the OXO rapid brewer that prevents tamping at an angle
an easy way to get better coffee from your mokka pot.
