Tamping Station for Delonghi EC 685 51mm Portafilter Tamper
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Makes the delonghi 51mm portafilter stable and level during tampering
- Rating
- 5 / 5
- Likes
- 134
- Downloads
- 1,268
- Makes
- 14
- Views
- 4,642
- Reviews
- 10
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
After a few interations this model did well during testing.
Especially when using only one hand for tampering, the portafilter is not stable when pressing down, so a solution must be found.
For my portafilter the fit is quite snug. If you want a more snug/loose fit, or your portafilter has slightly different dimensions, you may scale the model slightly.
The model is based on a own design for a different aftermarket 51mm portafilter, which may will be finalized and uploaded soon.
Here is a hexagon version:
https://www.printables.com/model/750547-hexagon-tamping-station-for-delonghi-ec-685-51mm-p
To remove the filter from the holder, just use ur thumb to lever against the holder and pull the filter up.
Printed on Anycubic Kobra 2 Pro.
0,4mm nozzle;
0,2mm layer;
eSun PLA+ black; bed 70°C, printing 220°C (pictures)
eSun PETG black, bed 85°C, printing 240°C (in action now)