Tamping Station for Delonghi EC 685 51mm Portafilter Tamper
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Makes the delonghi 51mm portafilter stable and level during tampering
- Ocena
- 5 / 5
- Polubienia
- 134
- Pobrania
- 1268
- Wydruki
- 14
- Wyświetlenia
- 4642
- Oceny
- 10
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
After a few interations this model did well during testing.
Especially when using only one hand for tampering, the portafilter is not stable when pressing down, so a solution must be found.
For my portafilter the fit is quite snug. If you want a more snug/loose fit, or your portafilter has slightly different dimensions, you may scale the model slightly.
The model is based on a own design for a different aftermarket 51mm portafilter, which may will be finalized and uploaded soon.
Here is a hexagon version:
https://www.printables.com/model/750547-hexagon-tamping-station-for-delonghi-ec-685-51mm-p
To remove the filter from the holder, just use ur thumb to lever against the holder and pull the filter up.
Printed on Anycubic Kobra 2 Pro.
0,4mm nozzle;
0,2mm layer;
eSun PLA+ black; bed 70°C, printing 220°C (pictures)
eSun PETG black, bed 85°C, printing 240°C (in action now)