230 models
The Donut Espresso Shaker is an espresso shaker that enables even distribution when preparing espresso for a wide range of portafilter sizes. What makes the Donut Shaker special is that it achieves this result with any portafilter size…
Are you tired of dumping coffee all over your counter every you time dose grounds into your portafilter? Do you have a 51mm portafilter? Well then I made this dosing funnel just for you my friend! Introducing DOSING FUNNEL FOR 51MM…
After a few interations this model did well during testing. Especially when using only one hand for tampering, the portafilter is not stable when pressing down, so a solution must be found. For my portafilter the fit is quite snug. If you…
.2mm layer height; .4mm nozzle; PLA 4 or more perimeters and infill whatever you want.
FDM -> It is recommended to use a layer height below 0.15 for printing. It is recommended to use LCD or SLA for printing to obtain higher precision. "A series of high-precision bullet models." In order to meet the needs of military…
Printed with tamper side to the build plate with supports.
Snug fit for Delonghi and other 51mm portafilters. .2mm layer height, extra perimeters. Food safe at your own risk.
Though designed for a 2006 Toyota Aygo, it may just fit your washer tank opening, as long as it has a 51mm / 2 inch diameter snap-fit rim. Printing I printed this in ABS, but most thermoplastics will probably work fine. Washer fluid…
All credits to placebo_design for his beautiful and functional design (thingiverse.com/placebo_design/designs). This is a remix of “51mm Funnel for porta filter Delonghi EC680 series” by “Placebo_design” (thingiverse.com/thing:3471204).…
There are already several models out there; Didn't find one with perfect fit for my DeLonghi model which didn't take forever to print. => On to CAD and made my own. Model number of espresso machine in headline to identify if it fits for…
Remixed to make useful with a Eureka Mignon on a tilted base. It may also be useful for people who want the holder to retain the dosing cup more securely without a tilted base. Have also included a version for different size dosing cup…
I designed it for my Delonghi Dedica portafilter tamping pad. goal was to design one that would match the rubber tamping mat. I intentionally keep the design the way that it is possible to use it as a standalone as well.
This is a stand to support the filter handle for a SMEG Expresso maker rather than just sitting the handle itself on the table surface when tamping down the coffee puck. The SMEG uses 51mm basket and the filter handle body is approx 60mm…
This is a 51mm coffee funnel that allows you to fill your sieve tray without getting everything dirty. Used printer settings: Filament: PETG Layer height: 0.24 mm Supports: Enabled Infill 15% Walls: 2 Bottom layer: 4 Top layer: 4
Printed in ABS+ small amount of tree supports needed 51mm Diameter end with anti slip ring. Donate now and make a difference in someone’s life!
Coffee Tamper for 51mm Basket Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.2 Infill: 25-100% Filament: Devil's Design PLA PC Gray Notes: Wall Line Width: 0.4 Wall Line Count: 4 Category:…
My grinder just dumps into a bin so I have to pour coffee grounds into my portafilter and it is a messy task. I saw a similar funnel on reddit and decided to make one myself. I had to sand it lightly to get a perfect fit. 51mm is the…
PLA ~15% infill
I like the original honeycomb box, but it is too small to hold my glue bottle. I did the lazy thing, here, and remixed the original to my specific needs. All I did was: import the original model into Microsoft 3D Builder split the hex…
Be careful, you need to change the needles size. Update: the needles size: In green: 22mm (4x) In yellow: 27mm (1x) In orange: 32mm (4x) In red: 37mm (1x)
I wanted a lightweight spool adapter for 73mm to 51mm spool. This one is only ~8g Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.30 Infill: doesn't matter Filament: Sunlu ABS Black Category: 3D…
The SUNLU filament spools (~73mm center hole) have slightly different diameters on their left and right side. This makes adapters with fixed diameter to fit very tight (hard to remove again) or too loose, so they can slip out while…
The SUNLU changeable filament spools (~63mm center hole, detachable parts to refill wound filament) have slightly different diameters on their left and right side. This makes adapters with fixed diameter to fit very tight (hard to remove…
Give the Gift of Coffee by Making a Donation :) Coffee Aligner: The Story of Creation Origin of the Idea The idea for the Coffee Aligner came from the difficulties faced when aligning coffee beans for espresso making. Espresso cannot be…
After creating a hexagon-style drip-platform for the Delonghi EC685 (to published yet), a hexagon-style tamping station must be created. For my portafilter the fit is quite snug. If you want a more snug/loose fit, or your portafilter has…
Compact solution to store and use portafilter, leveler and tamper.
espresso portafilter 51mm needs a tamper, mixer & distributor, so here you can find all of them beside the base for them
Enhance your espresso-making precision with the Leverpresso WDT 51mm. Designed for the Weiss Distribution Technique (WDT), this tool helps break up clumps and evenly distribute coffee grounds in your portafilter, ensuring better…
I had promised some time ago that i would post my not-keyboard stuff...and as i dig back through my files I'm occasionally finding suitable things that aren't one-off ridiculous widgets that apply only to the silly problems i make for…
As I was working on my friends Dedica, I got worried about scratching the fairly cheap chrome coating on top. I wasn't pleased with availabe designs as they didn't account for the ripples on top of the machine, so here we go. Holds two…
After the wild success of my Dosing funnel for 51mm DeLonghi Dedica portafilter (531 downloads to date!) I bring you the long awaited update: Magnetic dosing funnel for 51mm DeLonghi Dedica portafilter Alongside all the features of the…
Here is a jig for a 51mm pipe bend. This jig is made up of two part connected with two M6 allen bolts and nuts. It has markings for every 5 degrees but you can also use a protractor to set the angle of the bend. I made this in PETG so it…
Ortlieb Fork-Pack Adapter für das Cube Nuroad Ex. Mit deinem Schrauben Abstand von 151mm.
This dosing funnel sits on top of a 51mm tri-prong Gevi portafilter and allows you grind beans directly into the portafilter without spillage.
Delonghi Dedica 51mm Portafilter Tamping stand (flat base)
This coffee tamper station is designed for Delonghi EC685 with original portafilter or 51mm bottomless portafilter. It is great for filling ground coffee and tampering in making your espresso.
I made this for my own 51mm portafilter. No compatibility guarantee. Optionally you can use the Seam Painting feature to place the seam on the inner side, with Aligned seam option.
Saw the original model and i liked the whole thing so i scaled it down and also added another version that includes cilinders inside the design to save on filament. My coffee setup Casa Brews 3700 Essential Bottomless and spouted…
Speaker grill for 51mm hole saw, pressure-fit, whit groves to dismount. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution: 0,15 Infill: 20% Category: DIY
The Baratza Encore coffee grinder comes with a dosing cup that is intended for use with larger portafilters; I have a Delonghi Dedica with a 51mm portafilter, which is smaller than the dosing cup opening (meaning you cannot simply insert…
Inspired by the talented design by jootoole ( https://www.thingiverse.com/thing:5214891 ). Made specifed for Delonghi EC680/685/885, or other 51mm portafilters (not tested). 2 slots for portafilter. The 1st mount slot for stock…
Cable gland to the work table. Diameter 44mm/51mm/55mm/57mm/60mm/64mm/76mm Board thickness 25mm and 40mm
Fits a 51mm portafilter to use with the Fellow Opus catch cup. Line it up and dump it in. The side walls will keep the mound of grounds in place if you use a wire distributor. Food safe at your own risk.
I don't know if all machines are standardized measure it this one is for diameter 51mm 58mm
Needed a better more true spinning spinner for my 3dLabPrint 48" Edge 540. This one has prop access when mounted. Snug, centering hub fit for Eflite EFL01893 3 Blade 11x6 Propeller. Uses M3 Heatset inserts with M3x20mm screws. The tip…
Just a simple espresso dossing funnel. Nothing more, nothing more. Just put it on and twist it. This dosing funnel is for a 51mm in diamiter portafilter. Happy coffee making!
7.62×51mm NATO is nearly identical to .308 Winchester, and is the same caliber used by the Halo MA5B assault rifle. -Use for cosplay, short films, display piece, etc. -Should not be used with real firearms -Please use responsibly Print…
The simple coffee tamper with unscrew handle. Default size is 51mm, but I'm sharing also file for fusion360, so you can change size to the other. Materials: base - choose best one for contact with food. My choice is black PLA. handle -…
The dosing funnel is designed to prevent mess, while also using the “push portafilter to start grinding” function. Top fits the Sage Smart Coffee Grinder Pro. Bottom fits the Neouza 51mm Bottomless Portafilter (which attaches to De'Longhi…
Espresso Tamper for 51mm portafilter. Diameter is 50mm printer with 30% infill for strength on PLA 0.2mm Printed on Ender 3 S1 Pro
the Breville Cafe Roma uses 51mm portafilter basket. This model allows you to dose grounds into a cup with a detachable funnel. The dosing cup then fits nicely into the 51mm portafilter basket. The funnel also has a circumferential groove…
A 51mm “Star Grommet,” a name I believe was made up at the time of design. :) The intended purpose is to be slit along the star shape, allowing the wire to pass through and offering some seal against dust or heat… like in a printing…
Print instructions: Layer height : 0,15mm Filament : PLA or PETG No supports needed Enable ironing for smoother top ring surface UPDATE : added new STL with longer bottom part
Made for 51mm portafilter (Delonghi Dedica) and for my 1Zpresso J-Max hand grinder. After distributing the coffee in the portafilter and removing the funnel, there might be a slit on the edges where the funnel was located. Just give the…
kryt na Garmin fenix 8 51mm PETG stromové podpěry
Tamper de 51 mm. Diseñado en Fusion 360. Relleno: 20% Altura de capa: 0.02 Material: PLA
A 51mm portafilter tamping holder (made for this filterholder from aliexpress). no supports needed, print with at least 3 walls and 4 top layers and 15% infill.
Elevate your coffee-making experience with this custom-designed Portafilter Hanger, perfectly tailored for the 51mm portafilter of the DeLonghi ECP3420 (and similar) espresso machine. Key Features: Perfect Fit : Designed specifically for…
51mm Puck Screen Holder. It holds 2 puck screens.
Adapter für die Halterung des Ortlieb Fork-Packs. Passend für Fahrräder mit einem Schraubenabstand von 151mm an der Gabel wie das Cube Nuroad oder das Radon Regard. Für die Befestigung der Halterung am Adapter empfehle ich die…
The SUNLU filament spools (~73mm center hole) have slightly different diameters on their left and right side. This makes adapters with fixed diameter to fit very tight (hard to remove again) or too loose, so they can slip out while…
A remix of an excellent spice rack but suited to fit up to 51mm spices that seem to be more common in my area.
This is a 51mm portafilter mount that can be mounted on a wall using two screws. Printed with no supports. This is a part of my coffee cupboard organiser.
Non-Printed Parts Needed 4 M3 Threaded Inserts 23 Magnets, 6x2 mm 4 3m Screws 12mm long 4 3m Washers 4 3x10x4mm Bearings 4 O-Rings 1/8 x 3/64 10 0.35mm acupuncture needles 44 BB's Super Glue You can see the model on TinkerCad Print the…
Lejek z dystrybutorem do kawy kolba Delonghi 51mm, pla, petg
I printed this in ABS with the large funnel side facing down on the build plate. designed for my KitchenAid KCG0702CS Burr Coffee Grinder which has a huge outlet, the funnel can be smaller by follow below instructions Important read below…
7.62X51mm stacking loading block. This is a work in progress, so check for updates before printing. Category: Tool Holders & Boxes
This tool is dangerous, use at your own risk!!!!! I used @mchangcreative design as the basis for this creation. The centerpiece that holds down the filter paper is now print in place. This makes the workflow a slight bit simpler. I…
I resized the design to fit a 51mm Portafilter and adapt it to the thickness of the notches of the model.
Throw away that poopy garbage tamper your de' longhi or other 51mm espresso machine came with and you this bad boi instead Category: Kitchen & Dining
The original insert for the grinder always made a huge mess during and after grinding. So I remixed an insert off thingiverse to also hold a dosing cup. (dosing cup)…
To remove coffee puck from portafilter
Two version of tamper designed for 51mm lever. Design aims for comfortable pressing with bigger handle as well as strenght so that part last a while. First version is flat, second is ribbed to give the coffee puck distinct look. I…
added a Version without a hook, which is sturdier (CPAPMALMV2)
Yet another Coffee tamper for 52mm filter baskets. Tamper has a 51mm diameter. Works well with the old Delonghi coffee machine I have (that only came with a fixed integrated tamper) Recommend using a “concentric” top/bottom layer pattern…
Bottle holder for Ikea Skadis T-Nuts in 51 and 81mm. Screws: M2,5 Skadis T-Nuts: https://www.printables.com/de/model/228663-skadis-t-nuts-mounting-system-for-ikea-skadis-pegb
hydroponics nft net cup for 51mm hole blocking light 5 Diffrent insert shapes, 25mm x 25mm Rockwool cube 20mm rockwool plug 20x20mm cube/cottenwool ball 41mm Jiffy pellet Normal - No shape just a netcup depth of 50mm but scale back if you…
The part should fit most Garmin devices with a 26 mm band, but has only been tested on a Fenix 7x and Fortrex 801. I originally designed this part to fit a Fortrex 801 on my Fatbike for winter adventures. There were numerous iterations…
Couldn't find any so I decided to make my own. under-sized the bottom a tiny bit to ensure fit in all 51mm filters. Weight keeps it stable whilst spinning.
This is a simple 51mm coffee funnel. Not good, not terrible. Fits the portafilter of the famous De'Longhi Dedica. Printed with PETG / 15% infill, but PLA should work too. No supports needed. With PETG, you get a nice stringing test,…
This is designed to fit a 3-lug portafilter with a 51mm ID and a 62mm OD. It is held in place by 8 5mm(dia)x3mm(thick) magnets. The magnets friction fit in the holes and are installed after the print is finished. They're cheap and readily…
This is a compact tamping station designed for 51mm portafilters (3-ear type), compatible with machines like the DeLonghi Dedica and Tchibo Lapressa. Tested with an Tchibo Lapressa The portafilter rests securely on the top edge,…
Portafilter holder for Delonghi stilosa
Breach safe flag for NATO 7.62x5.56mm .308 Winchester rifles, tested on Ishapore Lee Enfield rifle. Print Tips: Tested in 0.3mm Layer height 4 perimeters (0.6mm nozzle) 30% infill (impact weakness is along layer lines)
The build can be printed as a stand alone, but I created it as an attachment for my Wall hanged portafilter station https://www.printables.com/model/284417-wall-hanged-portafilter-station-for-delonghi-stilo I printed mine using PLA ,…
The SUNLU reusable filament spools (~58mm center hole, detachable parts to refill wound filament) have slightly different diameters on their left and right side. This makes adapters with fixed diameter to fit very tight (hard to remove…
Gipskartonplatte Loch Abdeckung 50-51mm Durchmesser Abdeckung für ein 50-51 mm Loch in einer Gipskartonplatte. Plasterboard hole cover 50-51mm diameter Cover for a 50-51 mm hole in a plasterboard.
I wanted a small square to help calibrate my table saw and miter saw blade to 90 degrees.
Needed a tamping station and i didn't find anything that could fit the Normcore 51mm 3 ears for my coffee machine. So i had no choice to modelize one for me at least :'-( A remix / Inspired from…
easy dump dose of ground espresso ready for tamping. My tamper fits perfectly through the funnel so all grounds go where they should with no mess. I found it best to print the model with the open funnel part down facing the print bed. I…
Support Post with 51mm hight. General purpose. Built for soldering large PCBs on MHP30
Print Settings Printer: Prusa MK4S Supports: Yes Resolution: 0.15 Infill: 15% 30+ might be better Filament: PETG PLA was not tested
This funnel is designed to fit on the portafilter that comes with the wirsh espresso machine put the funnel on, place in coffee grounds, tamp, then remove funnel
Simple portafilter stand for 51mm portafiter like Delonghi
7.62X51mm Vase Mode stacking loading block. This is a work in progress, so check for updates before printing. Print Settings Rafts: Doesn't Matter Supports: No Resolution: .2 Notes: Print in Spiral Vase Mode with double your regular…
Barbell Collars attach firmly and securely to any bar with a sleeve diameter ranging from 47.5mm - 50.9mm. The collars are compatible with Olympic bars and powerlifting bars as well as most logs, cambered bars, Swiss bars, and safety…
This model is adjusted to fit the NEOUZA 51mm Bottomless Portafilter from amazon.
3 x 3 51mm netpot incubator to develope roots for NFT
