1 / 1
9-prong WDT espresso tamping and levelling stand 58mm (E61) and 54mm (Breville) sizes
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This stand is designed so a bottomless portafilter will rest easily on it, and have access to a WDT, leveller, and tamp.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 929
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (11)Powiązane
This stand is designed so a bottomless portafilter will rest flat easily on it (with the handle resting on the countertop or table), and have access to a WDT, leveller, and tamp close-by. The WDT ‘holster’ is for the design by jkim_makes.
Been using it for around a year now, holding up fine.