Liczymy pasujące modele…
Niche Zero holder for Sage/Breville 58mm portafilter. Uses the original screw to securely attach to the grinder. It is an elegant way to grind directly into a portafilter with a Niche Zero grinder. There is also enough space to fit any…
Standard 1x3 gridfinity bin, with cutout to accept a 52mm case/58mm bezel dial indicator with flat caseback. All the models I found were storing the dial indicator face up. This is wasting an enormous amount of space for anyone owning…
On the design: Holder diameter is 0.5mm higher than bottle diameter for perfect/easy fit.
I model this little Umikot 58mm short tab block because I really love the original stand of the Umikot design and want it to be integrated into the coffee block :D !
remixed from https://www.thingiverse.com/thing:6503771 to add magnets that i had. magnets are 20x10x2mm. it uses 2 mag
Tired of leaving your portafilter lying on the kitchen counter or rattling around in a drawer? Then today is your lucky day if you happen to have the exact same portafilter that I do! I have: 58mm Bottomless Portafilter, Professional…
This is a re-remix oft the following great works: (Thanks to all the effort you‘ve put in the design!) Original: by ExtRuben https://www.printables.com/model/841041-automatic-portafilter-cleaning-device 1st Remix: by Freedie B.…
This printed alternative to a commercial funnel helps prevent spreading coffee on the bench when filling the portafilter and when tamping the coffee. Suits a 2 ear E61 portafilter. I printed upside down, no supports, 25% infill. The…
Tamper printed in PETG, no supports, I added some extra layers on the bottom to stiffen it up and 30% infill. The funnel in the image is also available
I have recently found myself printing 'slime balls', spheres with interior tabs and rails that will deconstruct themselves in a sliding fashion but never break. They are really fun fidgets with some exciting mechanics and appealing…
3d printable bushing for generic coffee tamper. Longer contact surface and better tolerance helps with keeping tamping part parallel and consistent. Its Generic Chinese thing, your may have different shaft or whatever, you may need to…
If you like using the OXO Rapid Brewer but are trying to minimize plastic intake, this remix is for youi! The original 58mm adaptor file allowed the use of stainless steel brew baskets, which is the most important, but you were still left…
Um einen Schirmständer der eigentlich für einen großen Schirm gedacht ist mit einem Mastdurchmesser von 58mm auch mit kleinen Sonnenschirmen zu nutzen, fehlte ein Adapter auf 25mm Durchmesser der Schirmstange für einen…
A simple funnel for the Gaggia Classic porta filter.
Puck screen holder with two slots for 58mm and a smaller diameter for step down basket. Fits both thick and thin puck screens. Currently has options for 32mm, 46mm, 49mm as the smaller slot. I printed with 10% gyroid and variable layer…
Made this for my brothers racing sim rig. He was using the Thrustmaster Sparco R383, but wanted to replace the steering wheel, but it didn't fit the hole pattern of the original controller. This adapter requires: - 6xM6 nuts to add to the…
I really liked the idea of that simple tamping station but my umikot has long tabs (for protecting the needles). so I extended the cutouts to fit. another change i did was to change the angle of the handle support to better fit the lelit…
25/02/2026 - It's been 4 years, but I've finally removed the rogue part from the underside of the model and updated the page. Apologies to anyone affected. Upgraded version of my original water reservoir cover for the Gaggia Classic Pro .…
Simple dosing funnel for coffee preparation. Use fime 3x6mm cylindrical neodynium magnets (press fit)
Niche Zero holder for Sage/Breville or La Marzocco 58mm portafilter. Designed to stylistically match the grinder while still seamlessly integrating the stock dosing cup and holder. It is an elegant way to grind directly into a portafilter…
Remixed to have a detent to spin with index finger
In this mod, the short Mech is V2 modified to receive 4x m3 heatset inserts. The Spin Ring V2 is modified to receive 1x m3 heatset inserts. This avoids the need to directly thread M3x12 into plastic. Direct-thread M3s are…
The Donut Espresso Shaker is an espresso shaker that enables even distribution when preparing espresso for a wide range of portafilter sizes. What makes the Donut Shaker special is that it achieves this result with any portafilter size…
Holder for ~58mm classic tamper compatible with Ikea Skadis pegboard. I tested it on a Lelit Mara X stock tamper but it should work fine with other tampers. It holds tamper really well and it's locks in place with a really satisfying…
Tamper for compacting your ground coffee in the basket of moka-type or other coffee makers where this is something you want to do. It prints at 58mm as that is a loose fit in my 6-cup coffee maker, should be easy to scale for other sizes.…
I needed a tamping station / accessory organizer for my espresso corner and came across this model from alasdairedward: https://www.thingiverse.com/thing:4409957 If you have a 58mm Lelit portafilter from the VIP line, you will need the…
My coffee grinder (Baratza Forte AP) features a built-in scale, allowing me to precisely measure espresso by weight into a storage container. However, when I want to grind directly into the portafilter, I need to modify the grinder and…
La Marzocco 58 mm filter holder support for tamping without having to place the filter holder on the work surface. Certainly works with other filter holders but I haven't tried them.
Here I start dumping the 100+ STL of screw thread adapters that I've made for the Telecentric project Waiting for the famed OpenScad “universal adapter” Maybe I'll put them all here. Start with some M42: Camera mount thread M42x 1 adapter…
This is an adaptor for old 58mm electric boxes (EU) that don't have screw holes for mouting electrical switches. The adaptor has 56mm on the interior part that goes inside of the 58mm box and should fit snuggly inside. It has mounting…
This is a Lens Hood for a 58 mm Canon EOS Lens. Suitable for a focal length from circa 18mm
This is a funnel for a Lelit 58mm portafiler with two flaps. It is designed to fit exactly under my Quamar grinder, but should also fit under other grinders. Just print upside down to avoid the need of support.
Tool for de-soaking your puck if the parameters haven't been optimal. Use it to press out excess water through a puck screen. Fitting 58mm Baskets
Deutsch: Ich habe ein paar Griffschalen für die 58mm Victorinox Taschenmesser wie das Rambler entworfen. Bereits vorhandene Versionen haben mir nicht zugesagt, da sie geklebt werden mussten, Zahnstocher und Pinzette herausfielen oder mir…
Model of the 7.5x58mm MAS cartridge with bullet and casing in seperate files so you can print them in differnet colors. 1:1 scale within 0.01mm (sorry no freedom units here). Use superglue to conect the parts. Casing is made to be ligth…
The holder that this is remixed from works fine with Multiboard's HSW (Honeycomb Storage Wall) adapter, but I wanted a bolt-locking version. I also included a push-fit version. This should be pretty easy to print. I used these settings:…
A robust stand for a 58mm portafilter that prevents dripping water from reaching the countertop, and where the clip on plastic parts on modern portafilters, designed to heat up faster, don’t break off when tamping. Dimensions and initial…
This is a friction based funnel as my basket wasn't magnetic. I'll also ad a new connector part for the Niche-Zero here: https://www.printables.com/model/660431-niche-zero-cafelat-robotgaggia-classic-connector
This is a friction based funnel as my basket wasn't magnetic. I'll also ad a new connector part for the Niche-Zero here: https://www.printables.com/model/660431-niche-zero-cafelat-robotgaggia-classic-connector
Schachtel / Box mit Deckel für 7 Stk Filter mit 58 mm Gewinde bis ca 12 mm Stärke. Paßt auch für Polfilter. Die Schlitze sind 12mm breit und 62 mm lang. Es empfiehlt sich den Boden und den Deckel mit z.B. DC-Fix Velour oder dünnen…
Model of the 7.7x58mm Arisaka cartridge with bullet and casing in seperate files so you can print them in differnet colors. 1:1 scale within 0.01mm (sorry no freedom units here). Use superglue to conect the parts. Casing is made to be…
Qidi 4 plus stock spool holder adapter. More sizes to fit non-standard spools. Please see attached image. Print in PLA or any filament, infill any (I used 50% adaptive cubic) 55mm to fit Hatchbox, Funflag 57mm to fit Sunlu, Zyltech,…
A Portafilter Holder that fits different 58mm Portafilters and helps with a double sticky tape. it fits the different thicknesses of filters for that reason it won't be 100% but will hold the Portafilter well. Print Instruction 0.1 Layer…
Needs supports for the ears - set the support generation to something low like 10 degrees so only the overhangs get supports. Enjoy!
This is a funnel to keep the grinds from falling off the edges of the porta filter. made to snap fit for the Breville/Sage Dual Boiler porta filter (58mm). it fits most of the baskets including the precision VST baskets
Organizer for coffee devices with slots for a 58 mm tamper, a dosing ring and three slots for filters (puck screen). The front wall is specially made high so that you can add your own inscription.
The SUNLU reusable filament spools (~58mm center hole, detachable parts to refill wound filament) have slightly different diameters on their left and right side. This makes adapters with fixed diameter to fit very tight (hard to remove…
Kaffee-Tamperstation – Praktisch, stabil und stilvoll! Diese Kaffee-Tamperstation ist der perfekte Helfer für alle, die ihren Espresso professionell zubereiten möchten. Sie bietet eine stabile und rutschfeste Unterlage für deinen Tamper…
Diameter: 58mm Height w/ lid: 4 in (101.6 mm) Height w/o lid: 3.75 in (95.25 mm) Lid made to fit loosely.
Hi, I was in need for a few lens caps and as I didn't have any I modelled them. And after few iterations I got them working quite well. Enjoy and protect your lenses! Cap is a print-in-place model, so a good tolerance is needed Supports:…
With this funnel you can use QuickMill portafilter 58mm with the Eureka Libra Mill (grind by weight). Includes 4 holes for magnets 3x1mm being pressed in. As the original QuickMill sieves are slightly smaller than 58mm the outer diameter…
Flat frame grind block has two mounting holes. Utilizing those, theese walls can be printed in smaller parts. In addition of a 250mm aluminium core + hardware, you only need two Flat frame grindblocks and four 8mm axle bolts. Flat 58mm…
Distribution tool for portafilter 58mm Print Settings Rafts: No Supports: No **Resolution:** 200 Infill: 100 **Filament:** eSun ABS Category: Kitchen & Dining
Funnel for Portafilter 58mm Print Settings Rafts: No Supports: No **Resolution:** 200 Infill: 100 **Filament:** Sunlu PETG Category: Kitchen & Dining
Funnel for 58mm portafilter Print Settings Rafts: No Supports: No **Resolution:** 0.2mm Infill: 20 **Filament:** Sunlu PETH Yellow Category: Kitchen & Dining
Dose zum schrauben für Fotofilter mit 58 mm Durchmesser. Die Dose hat innen einen Durchmesser von 64 mm und eine freie Höhe von 12 mm. Eventuell innen mit Schaumgummi oder Velour auskleiden damit der Filter nicht klappert. Gedruckt mit…
Keep your pyrographic coffee distributor and a tamper together on a nice stand
This is a mount to hang non used portafilters. For printing the support needs to be done in a way that it doesn't touch the neighboring walls as it is otherwise hard to remove.
I created this because I disagree with the other Robot builds that suggest downsizing the 58mm Umikot to 94%, I want my as much of my bed as possible whisked. To this end, build the standard 58mm Umikot at 100%, and print this, it will…
58mm magnetic dosing funnel designed for IMS Barista Pro baskets. Attaches magnetically to the side of the espresso machine. Uses 6 press-fit (glue optional) 5x5mm round stick magnets. Printed upside down using scarf seams for a smooth…
Thread: layer height 0.1mm others 0.2 O-ring printed from white PETG For the AstroSolar filter use Oring with locking screws Glue the solar foil onto the threaded part with super glue. Heat the threaded part to 80°C before gluing so that…
Printing is very easy, no supports needed. Add some superglue to fix the magnets in place, pressing them in takes a bit of force.
printed in pla-cf Orca slicer about 1hr print time 0.2 layer hight 2 walls 4 top & bottom shells 20% infill gyroid
This is a stand I designed for the Breville 58mm Bottomless portafilter so it is easier to tamp it. Category: Kitchen & Dining BE SURE TO PRINT WITH FOOD-SAFE MATERIALS AND A FOOD-SAFE NOZZLE LIKE STAINLESS STEEL
This is an adapter for the “ Modular Spool holder” https://www.printables.com/model/672811-modular-spool-holder It fits my 1KG plastic spools from Siddament (an Australian-based company, no affiliation). I couldn’t find an appropriate…
This coffee distribution tool is a copy of the OCD tool, for evenly distributing the coffee before tamping. It is adjustable and I made it so the 3mm screws can lock the internal adjuster/spacer in place. however it doesn't actually need…
important: 58mm holder is based on lelit58 2 ears portafilter. so, please check your portafilter dimensions, especially ears. feel free to contact me and I will publish .stl, especially for your parameters I don't like the stock holder,…
This is an adapter to carry your USB-C Access token (T2F2-PIN+) instead of the USB Stick on the @work victorinox knifes. The Token needs some reduction in the width to fit the slot (I did sand mine down to about 4.8mm). The housing has…
Introducing my 5-basket espresso filter organizer! Enjoy the flexibility of vertical or horizontal storage – keep it stylishly displayed or neatly tucked away. I designed the back to be open for two reasons: easy access for everyone…
Yet another portafilter funnel. This one is for an Racilio Silvia 58mm portafilter. It was designed to allow the coffee to be tamped while the funnel is in place. This should be printed with supports. I used 20% infill. This project was…
Designed for this dosing cup here: https://www.aliexpress.us/item/3256807434818493.html?spm=a2g0o.order_list.order_list_main.5.3cc41802EGS7Va&gatewayAdapt=glo2usa Dosing cup Dimension: 58mm outer diameter by 71mm in height Good fit for…
i wanted a short tab stand for my umikot but i wanted it to be aerated as to discourage bacteria growth and use less filament
Fits 58 mm Swiss Army Knives (i.e. Classic SD) popping on to the existing rivets. I intend to add more files to this model as I add support for scale tools.
Jewelry Gold System Hydraulic Piston TPU seal, I.D. 138mm O.D. 158mm Especially designed for Jewelry Gold foundry machine, it's usable for all hydraulic piston that need a spare seal. You can scale it as you prefere to get a customized…
Leveler for the Nomcore tamper on a Sworks step-down basket. Printed in ASA for heat protection, but can be done in PETG. Tolerances might be different for other materials because of different shrink rates. Created with Onshape, you can…
Sage / Breville 54mm basket to 58mm dosing cup adapter. Turns out 58mm baskets are not actually that size.
This is a portafilter holder designed specifically for 58mm Rocket Espresso brand. Due to single spout portafilters as well as double spouts it can be problematic to tamp without stability so I made these. They can be used to store the…
Remix of RonnynnoRMan work for my old 58mm stainless steel Bialetti venus 4tz with longer funnel for more stable design
58mm Dosing Funnel for Breville Barista Max (VCF126X) and Max+ (VCF152X) Espresso Machines. Print upside down without supports. Two versions, choose yours: 0.6 nozzle, 0.4 layer height, 0.6 layer width TESTED 0.4 nozzle, 0.2 layer height,…
No more wasting counter space with espresso grinder accessories - this holds a dosing funnel, spoons and puck screens vertically next to an Eureka Mignon grinder, in an easy-to-reach grab-and-go position for easy and fast morning…
With this design I aimed for a perfect fit, with a minimal intrusion of the inner part of the funnel into the basket and the coffee bed. The low version is perfect for containing the mess when doing WDT. The medium variant is best if you…
Dosing ring I made for my Gaggia classic pro porta filter to fit right under my Baratza Sette 270, measurements can be found in the picture ;) includes inserts for magnets, magnets I used are about 5 mm wide and 2.75 mm high -- insert are…
This is a 3D model of a coffee distributor tool, perfect for ensuring an even and consistent tamp in your portafilter. The model supports both 53mm and 58mm sizes to fit different espresso machines. To assemble this model, you’ll need…
a simple coffee tamp used for pressing coffee down, multiple sizes
Coffee tamper 52-58mm press pad with water and coffee grounds collector
My fancy new single dose grinder comes with a pretty catchcup. Unfortunately it's meant for 58mm portafilter holders. This simple adapter / funnel thingy connects the catchcup to my 51mm portafilter and is large enough to allow a…
Another design for lamarzocco 58mm portafilter. La Marzocco 58 mm filter holder support for tamping without having to place the filter holder on the work surface. Certainly works with other filter holders but I haven't tried them.
the stand is designed for the Delonghi Dedica portafilter but fits every 58mm (OD) portafilter with a handle diameter of max. 30mm. Its useful for filling, tamping and all the espresso needs you might have. The photos show that it serves…
I designed and made it for my Hi-Brew coffee. But I think it is fit for 58mm portafilter due to it is adjustable. Its useful for filling, tamping and all the espresso needs you might have.
March 17 update : I've uploaded a reworked base design that I think is more aesthetically pleasing. See the first two photos in the image carousel. You can now build a holder to your preferences: more appealing Mark 2 base original Mark 1…
Portafilter-funnel for 58mm-diameters. The smaller diameter of the funnel should fit a 58mm portafilter. Considering Hygiene: While PETG and PLA themselves are food-safe, additives (such as colour pigments) or other byproducts from the…
Made a block for 2 58MM Puck screens, a 58MM PF funnel, spray bottle, and tool holder!
Might be better to print on the round side(or make small flat spot) not have the stepped look on top. Is made to twist in, but can be sanded.
Portafilter extension - no more spilling coffee Fits many grinders and coffe machines. Design for : SAGE SES880 and simmilar
