1 / 5
58mm Cup Holder for Jaapps Smart-Grind-By-Weight mod for Eureka Mignon — zdjęcie 1
1 / 5

58mm Cup Holder for Jaapps Smart-Grind-By-Weight mod for Eureka Mignon

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is my take at a 58mm cup holder for the Smart-Grind-By-Weight mod for Eurekas and other grinder by jaapp

Ocena
5 / 5
Polubienia
10
Pobrania
151
Wydruki
3
Wyświetlenia
890
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution

This is my take at a 58mm Cup Holder for the Smart-Grind-By-Weight mod by jaapp (https://github.com/jaapp/smart-grind-by-weight)
 

The cup fits nice and securely, leaving enough clearance. 

The cup holder slides over the load cell and screws in from the bottom with two M3 screws, so no seperate cover is needed. As the LoadCell is quite tall, screw length can vary. I used M3x16. 

I printed with supports at 0.15mm layers.
 

Tagi