1 / 5
58mm Cup Holder for Jaapps Smart-Grind-By-Weight mod for Eureka Mignon
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is my take at a 58mm cup holder for the Smart-Grind-By-Weight mod for Eurekas and other grinder by jaapp
- Rating
- 5 / 5
- Likes
- 10
- Downloads
- 151
- Makes
- 3
- Views
- 892
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution
This is my take at a 58mm Cup Holder for the Smart-Grind-By-Weight mod by jaapp (https://github.com/jaapp/smart-grind-by-weight)
The cup fits nice and securely, leaving enough clearance.
The cup holder slides over the load cell and screws in from the bottom with two M3 screws, so no seperate cover is needed. As the LoadCell is quite tall, screw length can vary. I used M3x16.
I printed with supports at 0.15mm layers.