1 / 7
Elegant 58mm Espresso Tamping/Tamper Station & Barista Tool Organizer — zdjęcie 1
1 / 7

Elegant 58mm Espresso Tamping/Tamper Station & Barista Tool Organizer

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This compact and elegant tamping station is designed to perfectly hold your 58mm bottomless portafilter and accessories

Ocena
4 / 5
Polubienia
28
Pobrania
141
Wydruki
0
Wyświetlenia
764
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I designed this tamping and accessories station to bring some order and style to my espresso workflow, specifically for use with my 58mm bottomless portafilter. This organizer solves the problem of a cluttered counter by providing a dedicated spot for everything, all within arm's reach.

It's designed for a 58mm espresso workflow and has custom-fit slots for all the essentials.

Key Features:

  • Stable Tamping Base for Bottomless Portafilters: The core feature is a dedicated holder designed to securely hold a 58mm bottomless portafilter, providing a perfectly stable and level surface for distribution and tamping. The open-bottom design ensures a great fit. (It will also work with most standard spouted portafilters).
  • Tamper & Distributor Slots: Two deep, perfectly sized holders for most 58mm tamper and most 58mm distributor/leveler.
  • Puck Screen Holder: A slot to store your puck screen, allowing it to dry properly between uses.
  • Accessory Slots: Two additional holes perfect for holding a WDT tool, a cleaning brush, or other small tools.

Detailed Dimensions:

For those who want to double-check if their specific accessories will fit, here are the detailed measurements from the design file. It's always a good idea to measure your tools before printing to ensure a perfect fit!

  • Overall Station Dimensions: 180mm (Width) x 160mm (Depth)
  • Portafilter Holder (Top-Left): Ø 73mm
  • Tamper/Distributor Slot 1 (Top-Right): Ø 58.5mm (for a snug fit)
  • Tamper/Distributor Slot 2 (Bottom-Right): Ø 59.5mm (for a looser fit)
  • Accessory Holders (Bottom-Left, 2x): Ø 22mm
  • Puck Screen Slots (3x): 2.2mm 

Print Settings

This is an easy print that requires no supports.

  • Rafts/Brim: Only if your printer tends to warp
  • Supports: No
  • Resolution: 0.16
  • Infill: 15-20%
  • Filament Material: PLA(Matte) or PETG is enough
  • Two-Color Printing: To create the two-tone accent, add a filament change in your slicer at the layer where the thin top line begins.

Tagi