Elegant 58mm Espresso Tamping/Tamper Station & Barista Tool Organizer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This compact and elegant tamping station is designed to perfectly hold your 58mm bottomless portafilter and accessories
- Rating
- 4 / 5
- Likes
- 28
- Downloads
- 141
- Makes
- 0
- Views
- 764
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed this tamping and accessories station to bring some order and style to my espresso workflow, specifically for use with my 58mm bottomless portafilter. This organizer solves the problem of a cluttered counter by providing a dedicated spot for everything, all within arm's reach.
It's designed for a 58mm espresso workflow and has custom-fit slots for all the essentials.
Key Features:
- Stable Tamping Base for Bottomless Portafilters: The core feature is a dedicated holder designed to securely hold a 58mm bottomless portafilter, providing a perfectly stable and level surface for distribution and tamping. The open-bottom design ensures a great fit. (It will also work with most standard spouted portafilters).
- Tamper & Distributor Slots: Two deep, perfectly sized holders for most 58mm tamper and most 58mm distributor/leveler.
- Puck Screen Holder: A slot to store your puck screen, allowing it to dry properly between uses.
- Accessory Slots: Two additional holes perfect for holding a WDT tool, a cleaning brush, or other small tools.
Detailed Dimensions:
For those who want to double-check if their specific accessories will fit, here are the detailed measurements from the design file. It's always a good idea to measure your tools before printing to ensure a perfect fit!
- Overall Station Dimensions: 180mm (Width) x 160mm (Depth)
- Portafilter Holder (Top-Left): Ø 73mm
- Tamper/Distributor Slot 1 (Top-Right): Ø 58.5mm (for a snug fit)
- Tamper/Distributor Slot 2 (Bottom-Right): Ø 59.5mm (for a looser fit)
- Accessory Holders (Bottom-Left, 2x): Ø 22mm
- Puck Screen Slots (3x): 2.2mm
Print Settings
This is an easy print that requires no supports.
- Rafts/Brim: Only if your printer tends to warp
- Supports: No
- Resolution: 0.16
- Infill: 15-20%
- Filament Material: PLA(Matte) or PETG is enough
- Two-Color Printing: To create the two-tone accent, add a filament change in your slicer at the layer where the thin top line begins.
