255 models
The original finecoar Grind Setting Dial V2.0 for all new Eureka Mignon grinders Now also compatible with all* new Eureka Mignon models! For more information, please continue reading under Compatibility. If you'd like to buy a finished…
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant
The default hopper that comes with the Eureka Mignon grinder is quite big and badly designed for single dose grinding. This hopper fits snuggly in the enclosure. It's also one of my first prints, so any improvements are welcomed. I'll…
Print approx. €3.60–€4.40 excl. taxPreliminary estimate for one variant
A remix of the "Uni knob" from @ordnerino that makes it possible to use the Grind Setting Dial with the original knob
Print approx. €0.64–€0.78 excl. taxPreliminary estimate for one variant
I designed a funnel for my ECM Espresso machine, which fits into a default E61 brew group. The E61 brew group is the most common type found in almost every larger espresso machine. I created this design to work with the Eureka Mignon…
Print approx. €1.04–€1.27 excl. taxPreliminary estimate for one variant
I first printed W0lf92's Knob Sleeve, but quickly realized that it didn't quite work for me. The Knob did grind away my original indicator on the right frontside of my mill and also pushed down my Grind Settings Dial (v2), so it's lid…
Print approx. €0.58–€0.71 excl. taxPreliminary estimate for PETGSource material: PET
If you like me have a Eureka Mignon single dose grinder and a La Pavoni coffee machine, you'll know that the metal doser is too big for the post-millenium 51mm portafilter. The doser adapter has been tested and works flawlessly, the…
Print approx. €0.43–€0.52 excl. taxPreliminary estimate for one variant
The Temper station replaces the Lid of an Eureka Mignon Mill with a Lid of 120mm x 120mm. It has place for a Temper, Leveler, Brush, blind screen all fitting to a E61 groupset (58mm).
Print approx. €0.51–€0.62 excl. taxPreliminary estimate for one variant
Auch die allerbeste Kaffeemühle ist hin und wieder inkontinent und verstreut Reste des Kaffeemehls in ihrer Umgebung. Seit ich diese Fangschale davor platziert habe, klappt die Reinigung mit einem Handgriff. Das Teil habe ich in einfachem…
Print approx. €1.18–€1.45 excl. taxPreliminary estimate for one variant
Design The base is tilted by 14 degrees, which enables the optimal ejection of ground material. The tilting angle also helps to remove all the grist from the grinder. In addition, clogging of the chute is prevented. There is a platform at…
The updated original finecoar Grind Setting Dial V2.1 for all new Eureka Mignon grinders Print if yourself?! The finecoar GSD V2.1 is fully open source under CC BY-NC 4.0 DEED and the printable files are available on Printables and…
Design The Eureka Mignon is a fantastic coffee grinder for espresso or Aeropress as well as filter coffee or French Press. It has only one flaw: The grind is well adjustable, but not well READJUSTABLE. The dial can be adjusted over…
The dosing cup holder has a recess for a self-adhesive silicone pad to allow a gentle triggering of the switch by pushing on the dosing cup. The diameter and height of the silicone pad are 8 mm and ~2.5 mm. Printed with PLA.
This is a tilted base for the Eureka Mignon Grinder lineup. I only have access to a Eureka Mignon Crono, so can not vouch for the other variations (e.g. Specialita etc.), but as far as I understand, they are all the same dimensions. I was…
I recommend to print the tray in PLA or better in PETG (so it wont deform if it gets washed under hot water) with an infill of at least 15% and a layer height of 0.2mm. Update: Thanks for your feedback and sharing your makes! :) I made a…
I was on the search, for a suitable tray for my Eureka Mignon coffee grinder, so that the dirt does not arise everywhere
Remix for the "Silenzio" version of the Eureka Mignon grinder (no screw adapter)
I designed this portafilter funnel, because I didn’t find any that looked nice, cleared my mill and had magnets instead of using the lugs of the portafilter. So I made this nice funnel. You’ll need 6mm diameter magnets with 3mm thickness…
Remixed to make useful with a Eureka Mignon on a tilted base. It may also be useful for people who want the holder to retain the dosing cup more securely without a tilted base. Have also included a version for different size dosing cup…
Inclined Base for the Eureka Mignon Series The Stand is tilted forward by 9deg to decrease retention just like the new Eureka Mignon Single Dose Grinder. It precisely fits on a Prusa i3 MK3S (with skirts turned off) The front is designed…
Design This 60mm single dose hopper for all newer Eureka Mignon models (Specialita, Manuale, Silezio, Facile, Filtro, Puristico. XL, Perfetto and Libra compatibility isn't tested, if you have any questions feel free to contact ) allows,…
This base model is the best I could find. I only added a hole to reduce the printing time. At 18% infill the stability is not affected
The Eureka Mignon MCI Single Dose Stand is a practical and efficient accessory designed for coffee enthusiasts seeking precise and consistent single dosing. For coffee enthusiasts who value precision and consistency in their brewing…
A simple drip tray for the Eureka Mignon Specialita Coffe grinder with some pegs to “click” it into the screwholes at the bottom front of the coffee grinder.
Make sure your walls are thick and consider printing slightly hotter than usual for better layer bonding. The top rim can be a little temperamental, but holds firm once the grinder is in place
Original mount will be used to fix it to the machine. v2 for steeper angle and button activation with the dosing cup itself by pushing it in Added version for Delonghi dedica users
I never used and didn't like the Eureka Mignon's hopper gate, so I removed it right away. Just to find out that the resulting hole is big enough to scatter ground coffee all over the place. This print fits snugly around the hoppers throat…
MOAB - Mother of all Bellows or Massive Ordnance Air Blast: A bellows and dosing cup combo designed for the Eureka Mignon grinders. Designed by Amahoola and me. Demo Video: Features: Functions as dosing cup AND bellows, at the same time!…
Simple titled base for the Eureka Mignon Specialita with optional tray to catch stray grinds. No magnets or anything fancy like that - although I have included recesses in the bottom of the base and tray for optional rubber feet, so that…
Design This plug covers the hole created after the portafilter fork has been removed to grind into a cup or similar. If you'd like to buy a finished product visit my newly made store :) Details Uses the original screw that came with the…
The old one was broken, so i made a new one in Fusion360
This ring fits directly on your stock dial like this ring for the first version. The advantage is a smoother dialing experience since you dont have a 3D-printed thread. to tighten up, i used a M3x6 screw, but it still sticks out. you can…
Coffee funnel for my Eureka Mignon & Lelit PL81T 57mm carrier, should fit fine for a PL41TEM. The side-opening fits the eureka outlet nicely, lets you press the button and you can leave it on when using the tamper. The default inner…
Design This 100mm single dose hopper for all newer Eureka Mignon models (Specialita, Manuale, Silezio, Facile, Filtro, Puristico. XL, Perfetto and Libra compatibility isn't tested, if you have any questions feel free to contact ) allows,…
This is a Fine Grind Setting Dial for Eureka Mignon MCI There are some for newer models but not for MCI, so i decided to do one for MCI which I Own. Gear Ratio is ⅓ so with 33 on Knob and 99 on Main Gear, dial scale is divided to 160.…
Grinding coffee beans makes a lot of mess, so I needed a funnel for my portafilter. I found one on thingiverse and it works so well! So I decided to upload it on printables as well. Scaled down to fit the smaller bottomless filter for my…
A larger knob with 100 markings making your dialing process much easier. Use double-sided tape to attach the arrow to the grinder body. Also, you can adjust the knob size and markings lengths using the OpenSCAD file included, just change…
This design allows you grind directly into the portafilter. It reuses the original portafilter fork. You will need an m3x3 insert
OK coffee geeks, here's a twist on Eureka’s brutalist art deco style, in 3D-printable kit form. The Eureka Mignon series is one of the best value grinders in the market, but it’s a multi-dose design. Many home baristas single-dose shots…
Use paint on supports for the protruding part of the pushrod. The rest of the model is support free. Organic support works great.
I didn't like the existing versions of the incline Stand, so i made my own. Its light in filament use and has a vibration dampening mat. Its 9° inclined and has a cutout in the middle. 2 walls and 20% infill is enough, do more if you want…
An attachment for the portafilter - 70mm inner diameter.
printed in K1C fully enclosed with white eSun petg oriented as shown without brim or supports
This is an adapter for the Eureka Mignon Notte coffee grinder to hold the Flair Classic 48mm "Bottomless 2-in-1 Portafilter". It works best with the "filling funnel - standard" attached to the basket. Note that you need to re-use the…
This design is heavily inspired by the design of Eric Chu on Thingiverse (his wasn't long enough for me; half the grounds flew over the tray). Should also fit the Mignon Silenzio and Perfetto. Please check measurements before printing.…
The Eureka Zenith coffee grinder has a massive hopper intended for commercial use with multiple kilos of coffee being in the hopper at any given time. Using it as a single dosing grinder has two main issues: it's extremely unwieldy, and…
I've seen a lot of models for the exact same purpose and most were pretty awesome, but something made me want to design it myself. So while not being a remix of a specific model it surely incorporates ideas seen in other models. Feel free…
I really loved the Dosing Cup Holder by tarik (Marked as a remix here) but I had a Eureka Silenzio, which doesn't come with the adjustable fork part needed for it. I designed my own to the best of my ability to match what I believe the…
With this funnel, you can insert the portafilter of the De'Longhi Dedica into the Eureka Mignon Libra and grind without the coffee grounds falling beside it. Then tamp with the filter still on. Thus it is possible to grind coffee with…
Multi-print system to convert the bean chute into a single dose hopper column that a single dosing cup with bean blocker gate fits into. This system allows easy measuring of a single dose and placing onto the chute as a hopper, and can be…
Seems that there are existing dozens of Eureka Mignons… was not sure if the existing bases are compatible with my grinder and so I created my own. Nothing fancy, 10° tilt towards you. I post some pictures of my grinder. If anyone knows…
For manufacturing you will need disk-shaped neodymium magnets, 3mm in diameter, 2mm in height. In the photo there is an option with six magnets, but now it seems to me that the option with ten magnets works better. The attachment contains…
A simple piece that allows the single dose forks from the original model to fit on a Mignon Manuale. Uses the standard screw that comes with the grinder to attach the original fork. The fork here…
I raised the base to place my dosing cup right in front of the chute
Simple 58mm cup to catch the grinded coffee. The base is 3 parts, due to mountig ot on the grinder. The original fork is covered in the print. To activate the grinder one pushes the complete plate/cup up. Please use some colorfull…
To allow for normal and decaf beans I created a hoppper based on the original that comes with the Eureka Mignon ORO XL. Instead I put a wall between the middle and some tabs to control the flow of beans from each section. Note: it may fit…
Instead of adding a large knob this print adds a small indicator that points on a painted scale to show ten sub steps per grind size. To install the indicator the rubber seal below the knob should be pulled up slightly so that the…
Eureka Mignon Fork Remix Upgrade your Eureka Mignon grinder with this custom fork designed for use with a tilted bed in single-dosing operations. This remix of TrafficBroker's original design ensures a secure and precise fit for…
The Zero is the “single dose” version of the ubiquitous Eureka Mignon coffee grinder series. The overall build quality of this grinder is great and it quietly (and quickly for home use) produces fluffy, consistent grounds day after day…
Saw this puzzle in a youtube video. Decided to make it 3d printable. There are two ways to assemble this puzzle: without the string loop (easier), and with the string loop (harder). You can begin with version one and then dissemble and…
Eureka Mignon Stark compatibility
This is a 9.5 degree tilt which I felt is about the limit whilst ensuring the beans still flow easily. The bottom has 4no. 8.2mm inserts for 8mm rubber pads.
Upgrade your Eureka Mignon grinder with a single-dose hopper and bellows for precision and convenience. Designed for minimal retention and maximum freshness, the compact hopper accommodates single servings of coffee beans, ensuring each…
I use a 15deg stand for my eureka mignon MCI grinder to reduce grind retention within the grinder but want to keep the ~ 220g hopper. I designed this adapter to counter the 15deg stand and use the standard hopper. I printed mine with…
Catch spilled coffee grounds - designed to fit the Eureka Mignon MCI grinder: https://www.coffeecircle.at/de/p/eureka-mignon-mci-espressomuehle
More magnets over at the Fridge Magnet Collection ! Hardware needed : 20x2mm round magnet Visit www.finecoar.coffee :) Print settings : 0,2 / 0,16 mm layer height 10%+ infill Arachne is helpful, but not a must Thick bridges Ironing on top…
This model provides a cover for the electronics design laid out by @jaap in the GitHub repository: https://github.com/jaapp/smart-grind-by-weight It is a variation of the original design by @jaap It contains the load cell, load cell…
printed in K1C fully enclosed with white eSun petg oriented as shown without brim or supports
The original model is a fantastic idea, yet I it lacked the PCB holder. Instead of adding a tilted stand to your grinder, just replace the original base. As a benefit, the button is moved to the front left, which at least for me is…
The tinkercad model can be found here: https://www.tinkercad.com/things/9K2JFuNddtJ
When the ground coffee was blown out, the finest coffee particles were distributed around the grinder. As a result, a fine film of coffee dust has formed on the work surface. To avoid this, I designed this attachment for the dosing cup…
Worm drive for Eureka Perfetto grinder. The 1:60 ratio allows for fine tuning, much better than the original direct setup knob. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Resolution: 0.1mm Infill: 40%…
A lid for a single dose hopper I found on printables: https://www.printables.com/model/227273-single-dose-hopper-for-eureka-mignon-grinders I embossed the text slightly which makes it easy to paint in slicers. If you don't want to have…
I love my Eureka Specialita grinder. Best value for the money. My only gripe is it makes quite a mess of my counter. I created this funnel to minimize the mess. It's really easy to install and remove for cleaning. *****Note****** This is…
This cover is meant to close the Eureka Mignon Fork opening when the fork is removed, to keep the grinder in clean shape. Happy Printing!
I wanted to make a single dose funnel which is compatible with the DF64 bellows as I already have a DF64 next to the Eureka Mignon. I like printing in vase mode as it is fast and beautiful (no seems). The dimensions are chosen such that…
Espresso Portafilter Holder (Compatible with Eureka Atom 65E & La Marzocco Linea Micra) Slide your La Marzocco Linea Micra portafilter into place and tilt it up to activate the button on your Eureka Atom 65E. Print it with 100% infill to…
Replacement rubber for Eureka Mignon Libra grinder which improves stability for bottom-less portafilter holders. This design is slightly wider and a few mms longer than the original. This enables bottom-less portafilter holders to rest…
Quick and easy design of a single dosing funnel for most of the Eureka Mignon grinders (mine is a silenzio model). Print without support, both parts upside down. You can use ABS, PLA or PETG by your preference.
Note: this Mod Kit has been deprecated. Check out V2 here https://www.printables.com/model/1225053-eureka-mignon-coffee-grinder-single-dose-mod-kit-v The Eureka Mignon series is one of the best value grinders in the market, but it’s a…
Ersatzteile (Gelenke) für einen älteren Eureka ! Campingstuhl. Die Originalteile (ABS?) brechen leider nach und nach durch. Daher habe ich sie neu und etwas stabiler konstruiert. Die originalen Niete am Stuhl müssen vorsichtig ausgebohrt…
One Version with
Gaggia portafilter funnel, remixed with a Eureka Mignon grinder chute cutout. Needs supports
This is a remix of the Smart Grind by Weight Mod for Eureka Mignon made by jaapp (excellent work): https://github.com/jaapp/smart-grind-by-weight Main differences are that it is adapted for the following inclined base for Eureka Mignon:…
Support for 57mm naked filter holder (Lelit)
Ticks all the boxes: Stays in place with two snap connectors. Uses minimal amount of material. Is almost flush with the surface, but still is easy to remove. Prints witnout supports. The other plugs I found were only a pressure fit and…
Tilt stand for an early version of the Eureka Mignon MCI in a 15 degree angle. Printing I used automatically painted supports. 0.4mm nozzle 0.2mm layer height speed profile on MK4 Also take a look the hopper adapter if you’re not using a…
With this funnel you can use QuickMill portafilter 58mm with the Eureka Libra Mill (grind by weight). V1: 4 holes for magnets 3x1mm being pressed in V2: 8 holes for magnets 3x3mm being pressed in As the original QuickMill sieves are…
personally I recomment to print it with fuzzy skin for the look and feel.
two parts needs to glue together with ca glue
Replacement lever for the on/off pedal for a Eureka PowerSpeed Vacuum
Modded version of 58mm cup holder for for Jaapps Smart-Grind-By-Weight mod for Eureka Mignon. Thinner side walls
This is a coffee grounds tray sized to fit a Eureka Mignon Stark grinder, with a fluted detail. It has a stepped rear lip to fit over the chrome base on the Stark, but it should also fit the Eureka Mignon Oro XL.
This is a custom-designed push button extension for the Eureka coffee grinder (Fig.: (C)). The stock grinder's push button (Fig.: (2)) can be difficult to access—especially when using a scale to measure precise doses of coffee. To solve…
It prevents the fork and the portafilter from scratches. It simply klicks in place, sometimes a bit firm, so it can‘t fall off. Suggest to print in PETG, so it wouldn‘t deform with your preheated portafilter. It‘s also printable in TPU to…
A larger adjustment knob for the Eureka Mignon Zero that is easier to read and far more precise and repeatable than the stock knob. Printable without AMS via manual filament changes. This remixed version has wider tick marks and numbers…
This is a replacement foot for Eureka Tagalong Highback chairs. It may fit other camping chairs as well, but has not been tested. The inner diameter of the foot is 16.05mm. (The 0.05 is for good luck) I've provided some gcode files sliced…
This is a bigger container for the Eureka Mignon coffee grinder. The original holds something around 300 g of beans. This one should hold nearly 500 g. I suggest, you print the bean stopper at 99% to improve the fitting. I also added…
Upgraded my Mignon Crono to a grind by weight grinder. Since I needed to 3d print a new front cover to accommodate the new display, I decided I wanted the top cover to match. Since there was no models available, I created this one. Give…
This is a replacement lid for the Eureka Mignon Silenzio grinder. It folds up and allows for quick refill of the hopper. Best for single-ish dosing of beans, as it is not as airtight as the original lid. Printed in PETG with 0.40mm…
![[finecoar] Grind Setting Dial V2.1 for Eureka Mignon](https://media.printables.com/media/prints/777304/images/6039888_4ce2cf05-2e19-4e57-b1fe-74c1b6c4f185_63bb1ffc-94d1-4e5a-895f-4ec86adb5f53/right_round.jpg)
![[finecoar] Eureka Fridge Magnet, Trinket, Badge](https://media.printables.com/media/prints/766190/images/5982916_b0532470-8655-451d-a24d-04739851fae7_985bb9d2-171e-4901-879a-d2faf5336491/p1040381.jpg)
