Espresso Portafilter Dosing Funnel (Standard E61 brewgroup) "Eureka Mignon Grinder Ready"
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.04 – €1.27 net (excluding VAT)
For file: Without magnets - E61 Espresso Dosing Funnel_0.4n_0.2mm_PLA_MK4IS_59m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.16 excluding VAT (range midpoint).
- Weight reported by the author
- 18 g
- Print time reported by the author
- 59.4 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A dosing funnel for my E61 ECM Espresso machine. You can use this funnel with and without magnets.
- Rating
- 5 / 5
- Likes
- 24
- Downloads
- 236
- Makes
- 2
- Views
- 1,354
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed a funnel for my ECM Espresso machine, which fits into a default E61 brew group. The E61 brew group is the most common type found in almost every larger espresso machine.
I created this design to work with the Eureka Mignon Specialita grinder. For this machine, it's necessary to push the small knob to initiate the grinding process.
Materials (magnetic version):
- I added 8 holes (each measuring 5mm x 5mm) for inserting small magnets if desired, but it's not necessary
- Magnets: https://a.aliexpress.com/_Ex1vWhl
- To print with magnets, add an 'E601 pause print' command to the G-code for layer 71 (at a Z-height of 14.2 mm) and push the magnets inside.
Print:
- 0,2 mm
- PLA/PETG
- without supports (I added some small support parts into the design. Very easy to remove)
- Print direction: Top to bottom