31 models
I recommend to print the tray in PLA or better in PETG (so it wont deform if it gets washed under hot water) with an infill of at least 15% and a layer height of 0.2mm. Update: Thanks for your feedback and sharing your makes! :) I made a…
A simple drip tray for the Eureka Mignon Specialita Coffe grinder with some pegs to “click” it into the screwholes at the bottom front of the coffee grinder.
Original mount will be used to fix it to the machine. v2 for steeper angle and button activation with the dosing cup itself by pushing it in Added version for Delonghi dedica users
Die Auffangschale hält den Platz um die Kaffeemühle sauber. mit PETG gedruckt Ich habe auch die entsprechende stl-Datei hinzugefügt
An attachment for the portafilter - 70mm inner diameter.
A bottomless portafilter holder for Eureka Specialita with a 68.5 diameter. The part can screw in the exististing holder for the fork.
I don't use the platform and cup, but it better when the machine is tilted.
I've been working on this for about a week or so. I now have a perfect working prototype after my fourth design iteration! I wanted to design a portafilter holder/base that blends in (almost) seamlessly with the profile of my mignon…
Version(s) V1.0 - 15Nov24 - Initial Design ---- Description Bottomless portafilter holder & tray combo. Slides back and forth a little to aid with pressing the start button. The recess at the back will stop any vibration that makes it…
This is a coffee grinder tray for the Eureka Mignon Specialita coffee grinder. I made this remix to have a bigger tray with this dimensions: width: 120mm (as usual) Two different versions: 120mm and 135mm height: 20mm Can be printed…
Since the dial from the „ Grind Setting Dial V2.0 “ was so hard to turn I looked for sleeves but there weren‘t any for the specialita, so I modelled my own version to fit the gears. Now I can use the original dial, which runs a lot…
This model provides a cover for the electronics design laid out by @jaap in the GitHub repository: https://github.com/jaapp/smart-grind-by-weight It is a variation of the original design by @jaap It contains the load cell, load cell…
The original model is a fantastic idea, yet I it lacked the PCB holder. Instead of adding a tilted stand to your grinder, just replace the original base. As a benefit, the button is moved to the front left, which at least for me is…
Other large dials have ~ 1:3 gear ratio and fairly small dial, which is not sufficiently precise for espresso, especially if you grind extra fine for small doses. This dial is whoping 6cm in diameter and features 1:1.3 ratio, and full 240…
I love my Eureka Specialita grinder. Best value for the money. My only gripe is it makes quite a mess of my counter. I created this funnel to minimize the mess. It's really easy to install and remove for cleaning. *****Note****** This is…
This is a full replacement for the stock chute on the Eureka Mignon Specialita. It's a little wider and is less prone to clogging. It also has a built in funnel. There are two versions. One for use with a tilted base (single dosing) and…
Eureka Specialita dosing cup holder (60 mm) to fit a MHW-3bomber dosing cup (link: https://www.aliexpress.com/item/1005006060043966.html ) Width of holder is 61 mm, to fit a 60 mm dosing cup. Printet in PETG with 0.6 nozzle and 15 mm…
I only use my grinder for single dosing and have been using this mod for well over a year now. It is a joy to use and the retention is only 0.3 grams (3 beans).
Printed in TPU 95A with 100% infill. The feet are tilted by 14 degrees and the back feet are cut off to not protrude beyond the base. The fit snugly in the screw holes. Once pusched in the stay in place without further fixing.
This is a remix of Oelsi's inclined base for the Eureka Mignon Specialita. I raised it up ¾ of an inch higher and added a channel underneath for wire management.
dient um die Einstellung des Mahlgrades im Büro vor unbefugten Zugriff zu schützen, wie z.B. in öffentlichem Büro es ist keine 100% Verschluss, es dient mehr zur “Abschreckung” wahlweise mittels Kabelbinder oder kleinem Kofferschloss…
This remix makes the holder work with an original Rancilio Silvia portafilter holder.
This is a GBW modification to the Eureka Mignon Specialita. I'm happy with my Specialita but I wanted to skip the single dosing step of weighing my beans each time I made an espresso. Now i can turn on the machine and hit grind and it…
A funnel for grinding directly into a Quickmill portafilter without creating a mess. It mounts on top easily.
One of the few downsides of the Eureka Mignon Specialita is that excess coffee grounds often end up on the countertop. This model solves that problem: It combines a tray with an integrated knock box in a very space-efficient design. To…
Nicely made Tray, took me multiple prototypes to make it fit nicely. Designed in Germany - Made by chinese machine! :) This is my first upload, i hope you like it. Feel free to modify it to your liking. V2: --> now locks in place, to stop…
Version(s) V1.0 - 05Oct26 - Initial Design ---- Description Remix of my portafilter holder to mount on the Smart Grind by Weight load cell. The back is extended up with a lip that latches over the dosing cup to keep the portafilter in…
Version(s) V1.0 - 05Oct26 - Initial Design ---- Description Remix of my portafilter holder to mount on the Smart Grind by Weight load cell. It screws to the load cell from the top, and a slide-in cover clicks in over the screws and…
Version(s) V1.0 - 05Oct26 - Initial Design ---- Description Tray-only version of my bottomless portafilter holder/tray. With the Smart Grind by Weight mod the portafilter holder sits on the load cell, so the tray is now a separate part.…
This is a full replacement for the stock chute on the Eureka Mignon Specialita. It's a little wider and is less prone to clogging. It also has a built in funnel. There are two versions. One for use with a tilted base (single dosing) and…
I only use my grinder for single dosing and have been using this mod for well over a year now. It is a joy to use and the retention is only 0.3 grams (3 beans).
